Contaminant Monitoring Manufacturers, Suppliers & Companies (Monitoring And Testing) Serving Madagascar
-
Particle Measuring Systems (PMS) sets the standard for cleanroom contamination monitoring. With over 60 patents, we create the technology that enables you to make fact-based decisions, improve process yield and comply with changing regulatory ...
Lasair - Model Pro - Airborne Portable Particle Counter
Portable particle counter for cleanroom certification and cleanroom monitoring. The Lasair® Pro portable particle counter supports a complete contamination control solution including cleanroom certification and clean area monitoring while ...
CONTACT SUPPLIER -
Safe Training Systems Ltd ( STS) specializes in scientific instrument design, development and manufacture. We have a wide range of skills - our products have involved detection systems using gas sensors, microwaves, diode arrays and also GPS, which ...
STS - Model LS1 & SS4 - Contamination Simulant Material
Use of Radiation Simulants: These materials are supplied as part of the Safe Training Systems Ltd radiation simulation system, and must not be used for any other purpose, nor be substituted by any other material. Such substitution will render any ...
CONTACT SUPPLIER -
Consulting firmbased in North Vancouver, BRITISH COLUMBIA (CANADA)
Hatfield Consultants provides high-quality environmental services for private and public sector clients throughout the world, including North and South America, Asia, Europe and Africa. Hatfield provides services in the areas of aquatic ecology, ...
Environmental Management and Monitoring Services
At Hatfield Consultants, environmental management and monitoring have been cornerstone services since we opened in 1974.For both aquatic and terrestrial ecosystems, we provide environmental monitoring services to dozens of clients in the oil and ...
CONTACT SUPPLIER -
Software vendorbased in Roedovre, DENMARK
Geokon is an independent software development company specializing in environmental data management systems for local authorities. The company has its base in Copenhagen, Denmark, but services local authorities across the world. Our objective is to ...
Geokon - Contaminated Land Software
Mapping potentially contaminated sites will for most authorities, result in the generation of large amounts of data. This information will be used for a variety of purposes including prioritizing sites, informing colleagues (i.e. planners, valuers, ...
CONTACT SUPPLIER -
Manufacturerbased in Fremont, CALIFORNIA (USA)
Founded in 1982, Lighthouse Worldwide Solutions is the world’s leading supplier of real time contamination monitoring systems and airborne particle counters. The company has leveraged its superior software design, data integration ability and ...
Project Management Services
The Lighthouse Installation Team provides quality installations and expansions. Our skilled professionals include project managers and installation crews worldwide who make Lighthouse installations the industry’s finest. Our quality, attention ...
CONTACT SUPPLIER -
Manufacturerbased in Malvern, PENNSYLVANIA (USA)
For nearly 40 years, Veltek Associates, Inc. (VAI®), headquartered in Malvern, PA, has pioneered the design and manufacture of hundreds of cleanroom solutions that surround contamination control. These innovations, many of them landmarks in the ...
Consulting Services
During the history of VAI, we have manufactured and developed over 500 strategic and critical contamination control products, systems and services. These innovative solutions are used by most GMP organizations worldwide. In 2001, after many years of ...
CONTACT SUPPLIER -
Manufacturerbased in Singapore, SINGAPORE
ARC Sciences specialises in ultrahigh vacuum solutions, surface science instrumentations, thin film deposition systems, related high purity materials and real-time trace volatile organic carbon (VOC) analysers. With more than 15 years of experience, ...
-
Manufacturerbased in Staefa, SWITZERLAND
For more than 30 years, we’ve been developing air samplers to measure microbial air contamination. We research, produce and maintain high-quality, innovative products, whilst our ambition for the optimal solution has made us the global market ...
-
Manufacturerbased in Hamburg, GERMANY
On October 27, 2020, the Hamburg based James Fisher Nuclear GmbH, an international provider of radiometric instruments for contamination and clearance monitoring systems, was acquired by Ludlum Measurements Incorporated (Texas). Founded in 1962 by ...
Model HFC-8 - Hand, Foot, and Clothing Monitor
Features: Intuitive User-Friendly Software, Spring-Loaded Hand Detectors for Reliable Contact with the Hand Surfaces, Compact Footprint with Easy Access to the Service Cabinet, Modern Touch-Screen Display, Stainless Steel Housing for Easy Cleaning ...
CONTACT SUPPLIER -
Software vendorbased in Las Vegas, CONNECTICUT (USA)
Cerno Bioscience is dedicated to the practical application of modern mathematical techniques to Mass Spectrometry for the purpose of improving the quality, accuracy, and reliability of MS analysis. Founded and staffed by a team with many years of ...
-
Manufacturerbased in Warrington, UNITED KINGDOM
More than 40 years of design, development and manufacture of quadrupole mass spectrometers. We design, develop and manufacture quadrupole mass spectrometers for advanced research applications and specialist process monitoring. Our quadrupole mass ...
Hiden - Model HPR-30 Series - Residual Gas Analyser for Vacuum Process Analysis
The HPR-30 Series are residual gas analysis systems configured for analysis of gases and vapours in vacuum processes and for vacuum diagnostics with sampling capability from high vacuum to atmospheric pressure. The systems are fully configurable for ...
CONTACT SUPPLIER -
Manufacturerbased in York, UNITED KINGDOM
Established in 1989, Industrial Textiles & Plastics Ltd is a leading producer of protective engineered textiles and chemical resistant membranes. The company’s expertise is in flame retardant and chemical resistant technologies. ITP’s products are ...
Puraflex Chemical Resistance Testing
Puraflex has been tested to the following EN Chemical Resistance Standards. Note that ASTM D5322 is a widely recognised test method for chemical resistance and it is incorporated within the EPA Method 9090 and ASTM D5747. Both EN 14414 and EN 14415 ...
CONTACT SUPPLIER -
Technologybased in Kurralta, AUSTRALIA
The RemBind technology was originally developed in 2010 in collaboration with the Commonwealth Scientific and Industrial Research Organisation (CSIRO). While the product was initially designed to bind up gasworks contaminants, independent testing by ...
-
Software vendorbased in Madison, WISCONSIN (USA)
Founded in 1996 and privately held, ESCI, LLC develops and markets SEVIEW, an integrated contaminant transport and fate modeling system. SEVIEW was developed as we recognized that the market was dominated by costly and complex solutions that were ...
ESCI - Version BUSTR-Screen - Screening Level Groundwater Transport Model
BUSTR-Screen is a screening level groundwater transport model that combines an expanded user interface with the BIOSCREEN model. This was done to simplify modeling and to document input parameters. Using SEVIEW the BUSTR-Screen interface can also be ...
CONTACT SUPPLIER -
Manufacturerbased in Hatton, UNITED KINGDOM
As one of the UK's leading and most respected particle testing and manufacturing companies, Particle Technology operates at the forefront of product reliability operates at the forefront of product reliability , supplying and supporting customers ...
Component Cleanliness Analyser
Due to increasing demand for technical cleanliness it is essential that manufacturers and suppliers can accurately measure the amount of contamination that remains on a component after a multi stage cleaning process. In addition to providing the ...
CONTACT SUPPLIER -
Manufacturerbased in Surrey, BRITISH COLUMBIA (CANADA)
Based in Surrey, BC, Canada, Pacific Rim Labs is one of the most highly respected ISO 17025 accredited and experienced high resolution mass spectrometry testing labs in the world. For more than a decade we have worked with governments, regulatory ...
-
Service providerbased in Schweitenkirchen, GERMANY
The company Hydroisotop GmbH operates in the area of analyis of natural isotope composition in the systems WATER, GAS, and ROCK and deals with special geological and hydrogeological questions like deep thermal waters, mineral waters, and medicinal ...
-
Engineering service providerbased in Virginia Beach, VIRGINIA (USA)
We are a small business consulting engineering firm specializing in geotechnical, environmental, groundwater, hazardous materials (asbestos, lead paint, mold), industrial hygiene, industrial and disaster planning services. We provide professional ...
Environmental Services
Our services include environmental site assessments, regulatory guidance, permit processing, preparation of environmental documents, groundwater and surface water quality analysis and monitoring, soils analysis and monitoring, indoor air quality ...
CONTACT SUPPLIER -
Technologybased in Strasbourg, FRANCE
We created BioMire to develop a new way to solve a persistent and costly problem for industry. The problem is microbial contamination and its impact on manufacturers’ productivity and reputation, which is partly rooted in the difficulty of accessing ...
Brewery Hygiene Monitoring Pack
A simple, complete and turnkey solution to implement a microbial contamination monitoring plan in breweries, with on-site testing devices, mobile applications and a personalised consulting service. Intended for breweries of more than 1,000 hl/year ...
CONTACT SUPPLIER -
Manufacturerbased in Kernersville, NORTH CAROLINA (USA)
Tex Tech is a premier designer, engineer, and manufacturer of specialty textiles and fabrics for a wide range of industries and niche applications. Tex Tech is an industry leader at the forefront of textile research, development, and manufacturing. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you