Determining pollutants in environmental and food matrices requires efficient sample preparation. BUCHI offers a wide range of solutions for reliable, efficient, flexible and safe sample processing procedures in the laboratory work flow to enhancing productivity and ...
Page 1/1 Short Note No 149/2015 Mineral oil contaminations in dry food samples SpeedExtractor E-916: Optimization of pressurized solvent extraction (PSE) for the rapid and efficient determination of MOSH and MOAH in dry food samples Many food samples are contaminated with mineral oil coming from different sources. One possible source of contamination is the migration from cardboard packaging ...
The ECONOAIR Premium L-15PTR is a low-cost high-performance personal air sampling pump. It is a simple model designed for sampling of asbestos, lead and other airborne contaminates. The rugged compact design features a rechargeable NiMH battery with available one-hour recharger. The L-15PTR can be programmed for timing routine activated sampling and allows the operator to select a reference T and ...
The ECONOAIR Premium L-12PTR is a low-cost high-performance personal air sampling pump. It is a simple model designed for sampling of asbestos, lead and other airborne contaminates. The rugged compact design features a rechargeable NiMH battery with available one-hour recharger. The L-12PTR can be programmed for timing routine activated ...
The Russian Peat Borer is a side filling chambered-type sampler. This discrete point sampler enables one to drive the sampler to any point in the sediment profile in the closed (empty) position. Once the target depth is reached, the “T” handle is turned clockwise to initiate the sampling while the pivotal cover plate supports the cutting action of the bore. As the sampler is turned ...
Applications: For extractive gas analysis. For emission and process monitoring. For continuous condensate pre-separation. Drainage of contaminations. Upstream discharge of sample gas ...
Applications: For extractive gas analysis. For emission and process monitoring. For hot filtration of sample gases. For removal of dust and contamination from sample gas. For protection of the ...
Introduction Quantitative determination of the total mercury content in filtrates of wash-off samples from the surfaces of walls, floors, equipment, and other facilities of m anufacturing areas is an effective method for the occupational safety ...
PROCESS INSTRUMENTSwww.ametekpi.com TDLAS Model 5100HD Gas Analyzers for Measuring H2S in Process GasBased on Tunable Diode Laser Absorption Spectroscopy (TDLAS)An additional gas such as CO2 or H2O may also be measured.Features and Benefits? Noncontact Measurement The sample has no contact with the optical measuring device which minimizes maintenance? All ...
R U G G E D O E M A U T O S A M P L E RAUTOMATIONASX-500 SeriesOEM Autosampler PlatformCETAC offers a flexible array of interface options to accommodate your application. CETAC has the experience of completing over 100 host instrument interfaces from over 50 manufacturers. • 5 Input/5 Output • RS-232/RS-485• USB• CustomAccommodates a wide range of commer-cially available racks. We also ...
Gas emissions analyzers in CEM’s or as stand alone are often exposed to heavy soot and dust contamination. Therefore it is necessary to filter the sample gas stream. The J.U.M. Engineering PreFilter is a very efficient, all heated and low pressure drop regenerative filter instrument for the removal of solids from a gaseous sample. The Model VE 112 utilizes our long time proven all stainless ...
ASX-520 FAMILY Random Access Intelligent AutosamplersWith wel l over 10,000 systems operat ing in laboratories worldwide, the ASX-520 family of autosamplers has become known as the work horse in many industries and laboratories. The simple design allows for endless operation and unprecedented performance. These autosamplers are ideal for a wide range of analytical techniques including AA, ICP, ...
Gas analyzers for emissions measurement are often exposed to heavy soot and dust contamination. Therefore it is necessary to filter the sample gas stream. The J.U.M. Engineering PreFilter is an efficient, all heated and low pressure drop sample interface for removing solids from two gaseous sample streams. The Model VE 222 utilizes two independent all stainless steel 2pm mesh filters and two ...
Gas analyzers for emissions measurement are typically exposed to heavy soot dust and condensed hydrocarbon contamination. Therefore it is necessary to filter the sample gas stream. The J.U.M. Engineering PreFilter is an efficient, all heated and low pressure drop filter for removing solids from a gaseous sample. The Model VE 112 utilizes an all stainless steel 2um mesh filter and an all stainless ...
Static headspace is one of the most popular techniques due to its versatility for analyzing volatile organic compounds (VOCs) in a complex variety of matrices. This is due to the elimination of tedious sample preparation steps and prevents contamination problems that are common to other sample introduction techniques. Teledyne Tekmar draws on our experience as a leader in low-level VOC analysis ...
The J.U.M. Engineering HFID Model 3-800 is a low cost, portable and compact heated total hydrocarbon analyzer for high accuracy, sensitivity and stability. The Model 3-800 uses a hydrogen flame ionization detector (FID) in a heated oven to prevent the loss of high molecular weight hydrocarbons and to provide very reliable performance in the analysis of trace level of contaminants in emissions, ...
Hydra AA Automated Mercury Analyzer Questions and Answers 1. Is the Hydra AA a cold vapor technique? Yes. The Hydra AA is a cold vapor atomic absorption spectrometer (CVAAS) for mercury determinations. 2. What is the detection limit for the Hydra AA? The instrument detection limit (IDL) is 1-2 part per trillion (ppt). 3. What is the Method Detection Limit? Hydra AA achieves routinely a ...
Easy to learn. Easy to use. Easy to own.The Hydra AA is a fully automated mercury analyzeremploying the latest advances in cold vapor atomicabsorption spectroscopy to achieve detection limits of 1 ppt.Method ComplianceDesigned to Meet U.S. EPA Methods 245.1, 245.5, 245.6, 7470A and 7471B, as well as European Standards EN-1483 and EN-13806.Sensitivity The Hydra AA determines mercury from the low ...
Hydra AF Automated Mercury Analyzer Questions and Answers 1. Hydra AF Series uses atomic fluorescence instead of atomic absorption as a measuring technique. Why? The ability of mercury to accumulate in our environment has created a need to measure extremely low levels of mercury. Consequently, government regulations have decreased target levels for mercury to the sub-part per trillion ...
P2.01GROUNDWATER MONITORING PIPESThe quality of soil water monitoring systemsdepends on many factors. Firstly, only legally permitted materials should be used, as it is knownthat some existing materials contaminate soil andenvironment. Secondly, if application of certainmaterials causes contaminated water samples, thequality of the monitoring system is affected, leading to unsatisfactory analysis ...