Continuous Emissions Monitoring (CEMS) Manufacturers, Suppliers & Companies (Monitoring And Testing) Near Africa
-
OPSIS AB is the leading supplier of open-path monitoring systems for air quality monitoring, continuous emissions monitoring (CEM) and process control. OPSIS offers total monitoring solutions and the product line includes both monitoring hardware ...
OPSIS - Calibration Equipment
OPSIS offers a range of calibration equipment for use with its CEM and process control systems. The system is based on the CB100 calibration bench. This is used with an external CA150 light source, and with an RE060 receiver at each end of the bench ...
CONTACT SUPPLIER -
Service providerbased in Lynnwood Ridge, SOUTH AFRICA
We specialise in the measurement of air pollutants both at the source, through manual source emission measurements and continuous emission monitoring, and at ambient air quality levels through ambient air quality ...
Station setup and management
Since it pays not to have a too narrow focus in industry, C & M offers a full basket of services when it comes to air quality monitoring stations. Apart from supplying the equipment, C & M also specialises in the installation and maintenance ...
CONTACT SUPPLIER -
Tekran was founded in Toronto, Canada in 1989 to develop custom analytical instrumentation for environmental analysis. Our first analyzer, the Tekran 2537, was introduced in 1993 and is now widely accepted as the gold standard for automated ambient ...
Hg CEM & Laboratory Training
A well structured training program pays immediate dividends, and our customers tell us Tekran training programs are among the best. It takes a well trained operator to get the highest performance out of their analytical equipment. At Tekran, we have ...
CONTACT SUPPLIER -
ManufacturerDistributor in Centurion, SOUTH AFRICA
CODEL International Ltd is a UK-company based in Bakewell, in the heart of the picturesque Peak District National Park design and manufacture cutting edge instrumentation, primarily, for monitoring emissions to atmosphere, road tunnel environments ...
Codel - Model GCEM4000 - Multi-Channel In-Situ Flue Gas Analyser
The GCEM4000 is a multi-channel flue gas analyser that uses Non-Dispersive Infrared Absorption (NDIR) technology. It provides high accuracy, low maintenance measurement of all the key combustion process emissions to atmosphere. It is capable of ...
CONTACT SUPPLIER -
ManufacturerDistributor in Modderfontein, SOUTH AFRICA
Founded in 1996 in Cheshire, UK Protea’s goal has been the development and introduction of new technologies for the online measurement of gases in industrial and research applications, to help control process and reduce environmental emissions. We ...
Protea - Model ProtIR 204M - Transportable CEM FTIR Gas Analyser
The 204M is a transportable CEM based on FTIR technology. Using the 204M for measurements of waste incineration and combustion plant process is as simple using an FTIR can be. With pre-loaded calibration methods for 28 gas species, automatic ...
CONTACT SUPPLIER -
ENVEA manufactures high-precision monitoring systems as well as environmental data processing and reporting solutions with extensive knowledge in the development of complete turnkey solutions. We assist entities in complying with applicable ...
ENVEA - Model TOPAZE 32M - Heated CLD NOx Analyzer
Single reaction chamber version for the monitoring of NO or NOx, or dual chamber for NO, NOx and NO2 measurements. Exist in 2 different versions: TOPAZE 52M-S : NO or NOx monitoring. TOPAZE 52M-D : NO-NOx and NO2 simultaneous ...
CONTACT SUPPLIER -
PremiumManufacturerDistributor in Johannesburg, SOUTH AFRICA
We design and manufacture world-class gas analysis systems and emission monitoring solutions to measure gaseous emissions from industrial processes, gases released from natural sources into the atmosphere, and gases present in working environments. ...
Calcmet - Analysis Software for FTIR Gas Analyzers
Calcmet is used together with Gasmet gas analyzers to collect FTIR spectra of the sample gas and to analyse the concentrations of gas components. Calcmet provides an easy to use interface to the FTIR gas analyser, stores and visualises the sample ...
CONTACT SUPPLIER -
ManufacturerDistributor in SOUTH AFRICA
Teledyne API (TAPI) designs and builds precision air quality and industrial gas monitoring instrumentation at our factory located in San Diego, California, USA. Our products are used worldwide in ambient air quality monitoring systems (AQMS), ...
TAPI - Model T100H - High Range UV Fluorescence SO2 Analyzer
The Model T100H SO2 analyzer uses the proven UV fluorescence principle with the high measurement ranges and interferent rejection needed for extractive source monitoring. The Model T100H provides a simple but precise solution for a broad range of ...
CONTACT SUPPLIER -
ManufacturerDistributor in SOUTH AFRICA
JCT Analysentechnik GmbH has been founded in 1992 through a group of experts involved in gas analysis technique for more than 20 years. JCT Analysentechnik GmbH produces and provides gas conditioning components such as heated sample probes, heated ...
-
ManufacturerDistributor in SOUTH AFRICA
Envitech Europe Design, Development Manufacturing and Establishment Environmental, Meteorological and Hydrological Monitoring Systems Located in the UK, and has clients and customers worldwide. Envitech Europe have know-how and a lot of experience ...
Envitech - Model T0110, T0310, T0410, T0510 - Temperature Sensors
Temperature Sensors with 4-20ma, RS232, RS485 and Ethernet Output . ...
CONTACT SUPPLIER -
ManufacturerDistributor in Port Harcourt, NIGERIA
madur electronics was founded in 1984 in Vienna, Austria and now is worldwide recognised manufacturer of gas analysis equipment. At the beginning, it was gathering all the activities of the company, i.e.: sales, production, service, R&D. ...
Photon - Model S - CEMS System with NDIR Sensors
Photon S is madur’s most recent and most sophisticated apparatus. It was created based on portable gas analyser - Photon. As its precursor it also uses NDIR gas sensors as the main measurement method - it can have 9 of them supplemented with 4 ...
CONTACT SUPPLIER -
Service providerbased in Port Harcourt, NIGERIA
The Initiates Plc. (TIP) is a professional Waste Management company delivering Waste Management, Industrial Cleaning and Decontamination services to both Private and Public sectors. TIP is quoted on the Floor of the Nigerian Stock Exchange. TIP ...
-
ManufacturerDistributor in SAUDI ARABIA
Signal Group Ltd develops and manufactures gas analysers for the professional testing of VOCs, vehicle and engine emissions, tobacco smoke, impurities in special gases, power plant emissions, catalyst efficiency, and boiler/burner combustion ...
Signal Group - Model Series IV Quasar - Chemiluminescent Detector (CLD) Gas Analyser
Series IV Quasar is a Chemiluminescent Detector (CLD) for NOx measurement in engine emissions, combustion studies, process plant, CEMs and medical gas production. A very high specification is achieved using a "soft discharge" neon lamp ozone ...
CONTACT SUPPLIER -
Software vendorDistributor in SAUDI ARABIA
Agilaire is the leading provider of source and ambient air data management systems, with data flow starting from its 8872 Site Node/ loggers, up to either self-hosted AirVision servers or Agilaire’s AirVision cloud-based hosting. Data can then be ...
Agilaire / ESC - Model 8864 - Data Logger
Agilaire is pleased to offer the Model 8864 as an updated version of the proven and reliable Model 8832 platform. This embedded device ensures complete security and protection against viruses, unauthorized use, and hosting unauthorized software that ...
CONTACT SUPPLIER -
Apex Instruments, Inc. designs, manufactures and distributes emission measurement sampling equipment. Founded in 1988 by William Howe, an experienced source tester, Apex Instruments has evolved to become a worldwide market leader in the source ...
-
PremiumManufacturerDistributor in Abudhabi Industrial City, UNITED ARAB EMIRATES
SailBri Cooper Incorporated (SCI) is a world leader in near real-time metals measurement through Cooper Environmental’s line of Xact® monitoring products for ambient air, stack emissions and water. The Xact® series has the world’s first and only ...
Xact - Model 825 - Multi-Metal Quantitative Aerosol Generator (QAG)
The Quantitative Aerosol Generator (QAG) creates an aerosol of known concentration by nebulizing a solution. The resulting droplets are carried out of generation area to a drying chamber where they are dried to salt particles. Depending on the ...
CONTACT SUPPLIER -
Software vendorDistributor in Doha, QATAR
CMC Solutions is a leading supplier of PEMS or predictive emission monitoring systems, and the most advanced emissions monitoring solutions available on the market today. We provide you with customer preferred, best-in-class predictive emissions ...
CMC SmartCEMS - Model RASCAL - Remote Automated Sample and Calibration
The SmartCEMS Remote Automated Sample and Calibration, or RASCAL, interfaces with the PEMS or DAHS and performs automatic audits and report generation for PS-16 compliant RAAs. The remote calibrator is used with a portable analyzer to provide a ...
CONTACT SUPPLIER -
Distributorbased in Rastanura, SAUDI ARABIA
Gulf Advanced Control Systems, also known as GACS Arabia in the Kingdom of Saudi Arabia.GACS Arabia offers complete range of Environmental & Laboratory instrumentations, we have extensive product line from key manufacturers for each category. Our ...
Air Quality Indices (AQI)
Air quality is defined as a measure of the condition of air relative to the requirements of one or more biotic species or to any human need or purpose. Air quality indices (AQI) are numbers used by government agencies to characterize the quality of ...
CONTACT SUPPLIER -
ManufacturerDistributor in Rastanura, SAUDI ARABIA
Since the foundation in June 1991 we have been focussing on the development of environmental measuring devices. Meanwhile we have gained a leading position for continuous emissions measuring technology. One area of own developments has been the ...
FMD 02 - Flow Measuring Devices
For the operation of a facility with streaming gases (e.g. hall exhaust air, exhaust gases etc.) the continuous registration of the exhaust gas velocity respectively the flow as well as the temperature are often of substantial importance. In case of ...
CONTACT SUPPLIER -
DistributorOffice in Jubail, SAUDI ARABIA
Since its founding in 1972, CleanAir has an established reputation for excellence on projects of all sizes, ranging from boiler, APC equipment and cooling tower efficiency testing to SCR baseline testing and optimization to hazardous air pollutant ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you