Continuous Emissions Monitoring (CEMS) Equipment For Monitoring And Testing Available In Maryland
-
ShowcaseManufactured by Synspec BVbased in NETHERLANDS
Continuous emissions monitoring system (CEMS) for high-range stack measurements. Synspec Delta 116 is a continuous emissions monitoring system (CEMS) built specifically for high-range stack measurements according to US EPA 25A. The analyser provides the sum of all other hydrocarbons in the same measurement cycle for better determination of the total air pollution. The method utilised ensures that ...
-
ShowcaseManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Measure Gases in Ambient and Humid Conditions. Gasmet CX4015 is designed for continuous monitoring applications in ambient conditions, such as workplace air monitoring and quality control applications. It can be used to measure up to 50 components simultaneously, and additional gases can be easily added without any hardware changes. The sample cell can be heated up to 50 °C, which allows ...
-
ShowcaseManufactured by Fluid Components International LLC. (FCI)based in USA
The MT100 Series is an insertion type, multipoint thermal flow meter specifically designed for large diameter pipes, such as stacks, industrial chimneys, and flues, and large rectangular ducts, such as air feed intakes and HVAC. These large pipe/duct applications are difficult for ordinary flow meters because of distorted flow profiles and lack of straight-run that can lead to inaccurate and ...
-
PremiumManufactured by Hangzhou Zetian Technologybased in CHINA
Hygronom is the professional humidity meter used to measure the humidity of flue gas emitted by pollution sources. According to measured humidity, it converts wet gas concentration into dry gas concentration. In addition, the HM-200 precision humidity meter also can be used in industrial online humidity ...
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Gasmet Multipoint Sampling System (MSS) is designed for online monitoring of multiple measuring points. The Gasmet MSS consists of a wall-mounted stainless steel case which includes all valves, flow meters, and pump. Standard setup includes one pump with four (4) sample gas input line, but up to 32 lines can be added according to customer need. Additionally, a second sample gas pump can be added ...
-
PremiumManufactured by Hangzhou Zetian Technologybased in CHINA
According to the status and characteristics of construction sites and production industry generated pollution, applying more sophisticated network cloud platform technology, CEMS manufacturers like ZETIAN has developed the digital EQMS-3000 remote continuous air monitoring system. The continuous air monitoring system can measure the air concentration of particulate matter (including: TSP, PM10, ...
-
PremiumManufactured by ENVEAbased in FRANCE
The In-Situ TDLS gas analyzer has been designed for meeting the requirements of a large range of CEMS and Process applications. LAS 5000XD uses Tunable Diode Laser Spectroscopy (TDLS) and comes in various models for measuring parameters such as NH3 + H2O, HF, CO + CO2, O2, HCl + H2O, ...
-
PremiumManufactured by ECO Physics AGbased in SWITZERLAND
The nCLD AL is the next generation in one-channel high precision ambient air monitoring instrumentation. Unique in speed and reliability, the nCLD AL is modular designed and capable of sequentially measuring NO, NO2 and NOx. The analyzers expandable capabilities allow assessment of additional nitrogen based parameters. Its graphical user interface “GUI“ also individually displays ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
OPSIS CEM systems measure multiple emissions or process gases in real time in situ. Using the DOAS (Differential Optical Absorption Spectroscopy) technique, the system is non-contact, with fast ...
-
PremiumManufactured by ENVEAbased in FRANCE
QAL1 Approved ProScatter particulate CEM providing high quality emission measurement of low dust concentrations from dry industrial ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran Model 1304 Air Filtration System is an inexpensive, convenient conditioning unit for plant compressed air. The Series 3300 Mercury CEM requires two types of air in order to operate. Motive air is required to drive the inertial filter sample flow via an eductor. Zero Air is used for dilution and for the generation of calibration gas. Both types of air should be dry, oil free and ...
-
PremiumManufactured by Tianjin Zwinsoft Technology Co.,Ltdbased in CHINA
ZWIN-CEMS06 flue gas analyzer is a gas analyzer independently developed by our company for environmental monitoring and on-line gas analysis of industrial field emissions. The analyzer mainly measures gas concentrations such as SO2, NO and O2, and has the characteristics of high measurement accuracy, high stability and reliability, and fast response time. Especially suitable for extractable ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
General: 6 analog inputs. 5.6” TFT touch screen (640 x 480). Backlight. Screen Saver. Automatic Email of events (Ethernet Only). Web Server (Ethernet Only). Ingress Protection: IP 65 front, IP20 rear. Operating Temperature: 0°C to 50°C. Safety Standards: CE cULus, RoHS. Security ...
-
PremiumManufactured by ENVEAbased in FRANCE
QAL1 approved particulate CEM which meets US EPA PS-1 requirements for Opacity monitoring from combustion stacks. Robust multi corner cube reflector provides truer reflection of transmitted light compared to traditional “mirror type” reflectors providing greater confidence in measurement. ...
-
PremiumManufactured by Bertin Technologiesbased in FRANCE
The BAB air monitoring beacon is used in nuclear facilities for a continuous surveillance of alpha; & beta artificial radioactive aerosols concentration with radon progenies and ambient gamma ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
Dekati eDiluter is a portable dilution system that makes sample conditioning as easy as it can be. The Dekati eDiluter comes standard with a fixed 1:60 dilution factor, but it can as well be provided with a customer specific dilution factor in the range of 1:25-1:225. The Dekati eDiluter dilution parameters can be monitored on an integrated LCD display and a rotary controller knob allows the user ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
Dekati eDiluter Pro is a portable dilution system that allows easy sample conditioning for a wide range of particle measurement applications. Its compact structure includes a two-stage dilution system with an adjustable dilution factor ranging from 1:25 to 1:225. The high sample output of the Dekati eDiluter Pro allows the system to be fully integrated with all Dekati® Instruments and is also ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
OPSIS data logger system is designed for data acquisition applications. The data logger can handle analogue and digital input and output signals as well as serial ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
High-sensitivity, forward-scatter laser measurement for particulate matter, for use in combustion processes where condensed water is not present (for sale in the USA and China only). 4650-PM provides the stable, accurate low-range measurement of particulate matter in stacks and ducts where water droplets are not present in the flue gas. NOTE: The 4650-PM is currently available only in the USA and ...
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Gasmet heated Multipoint Sampling System MSSH is designed for online monitoring of multiple measuring points. Gasmet MSSH can be used with Gasmet CEMS ll e system. Gasmet MSSH is an ideal tool for sampling trace concentrations of pollutants in wet, corrosive gas streams, as the sample pump, filter and valves can be heated up to 180°C. The Gasmet MSSH consists of two wall-mounted stainless ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you