Continuous Emissions Monitoring (CEMS) Equipment For Monitoring And Testing In Minnesota
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati Diluter DI-1000 is an easy-to-operate and reliable dilution device for diluting aerosol and gaseous samples from any ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
A compact, reliable multi-gas analyser for measuring flue gas emissions in processes burning natural gas and biomass. The FGA provides accurate, reliable measurement of carbon monoxide, nitric oxide and oxygen in flue gases. It is an integrated solution for Continuous Emissions Monitoring Systems (CEMS) applications in smaller combustion ...
-
based in USA
MATS CEMS for NIST traceble measurements for Hg, HCl, HF, PM, and ...
-
Manufactured by TSI Incorporatedbased in USA
The Series 6300 CA-CALC Compliance Protocol Exhaust Emissions Analyzers guide consultants and boiler service professionals through each step of the CTM-34 test protocol, provide mass emissions calculations of exhaust emissions and print reports on site. These features streamline the testing process so the user can complete periodic combustion testing quickly and with ensured accuracy. Additional ...
-
Manufactured by 3Mbased in USA
The CPS car park air monitor accurately and reliably protects the public and employees from airborne toxic gases in parking facilities and tunnels. The system was designed to comply with the high air quality safety standards enforced in such European countries as Germany, the Netherlands and ...
-
Manufactured by Durag Groupbased in GERMANY
Predictive Emission Monitoring Systems (PEMS) are an innovative and cost-effective approach to continuously monitor source emissions as alternative to Continuous Emissions Monitoring Systems ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati eDiluter Pro 1200C is a modified version of the eDiluter Pro dilution system specifically designed for particle measurements from extreme temperatures such as measurements directly from a combustion zone or flame. The eDiluter Pro 1200C includes the standard eDiluter Pro unit combined with the Dekati High Temperature Sampling probe that enables particle sampling from up to 1200 °C. ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
High-sensitivity, forward-scatter laser measurement for particulate matter, for use in combustion processes where condensed water is not present (for sale in the USA and China only). 4650-PM provides the stable, accurate low-range measurement of particulate matter in stacks and ducts where water droplets are not present in the flue gas. NOTE: The 4650-PM is currently available only in the USA and ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
Dekati eDiluter Pro is a portable dilution system that allows easy sample conditioning for a wide range of particle measurement applications. Its compact structure includes a two-stage dilution system with an adjustable dilution factor ranging from 1:25 to 1:225. The high sample output of the Dekati eDiluter Pro allows the system to be fully integrated with all Dekati® Instruments and is also ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
Dekati eDiluter is a portable dilution system that makes sample conditioning as easy as it can be. The Dekati eDiluter comes standard with a fixed 1:60 dilution factor, but it can as well be provided with a customer specific dilution factor in the range of 1:25-1:225. The Dekati eDiluter dilution parameters can be monitored on an integrated LCD display and a rotary controller knob allows the user ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
Compact portable multigas analyser, capable of measuring up to eight flue gases in a range of combustion and emissions processes. Lancom 4 delivers the complete solution for portable flue gas analysis, integrated into a compact battery-powered unit able to measure up to eight gases simultaneously with nine separate sensors. Simple to set-up and easy to operate, Lancom 4 enables highly accurate ...
-
based in USA
The SmartCEMS® Probe is a component of a predictive emission monitoring system (PEMS) that provides for continuous stack gas sampling for pollutants and diluents under U.S. EPA 40 CFR Part 60 and/or U.S. EPA 40 CFR Part 75 regulations. The Probe will meet the requirements for sampling during model development and PEMS QA activity. The Probe is required to connect the sample line and the ...
-
based in USA
The SmartCEMS® Sample Interface Panel is a component of a predictive emission monitoring system (PEMS) that provides for continuous stack gas sampling for pollutants and diluents under U.S. EPA 40 CFR Part 60 and/or U.S. EPA 40 CFR Part 75 regulations. The Sample Interface Panel will meet the requirements for sampling during model development and PEMS QA activity. The Sample Interface Panel ...
-
based in USA
The SmartCEMS-75 PEMS or predictive emission monitoring system (PEMS) is a complete system that provides continuous data recording and report generation compliant under U.S. EPA 40 CFR Part 75 regulations. The system comes with a data acquisition component and is guaranteed to meet 40 CFR Part 75, Subpart E for combustion turbines and gas/oil fired boilers, or heaters. The data acquisition and ...
-
based in USA
The SmartCEMS® Continuous Parametric Monitoring System is a complete system that provides continuous data recording and report generation compliant under the U.S. EPA 40 CFR Part 60, Appendix B, PS-17 requirements. The system comes with a data acquisition component and is guaranteed to meet CPMS and U.S. EPA standards for combustion turbines and gas/oil fired boilers, or heaters. The data ...
-
based in USA
The SmartCEMS Developer package is a set of materials including PEMS development documentation and tools for the PEMS developer to be used to build models for use with CMC PEMS products. The developer package allows end users and third party entities to build, support, maintain, and improve PEMS models using CMC technology. The package includes minimum training to get the development tools ...
-
based in USA
The SmartCEMS® Server package is a set of software tools and a platform to gather PEMS data from various sources such as CMC’s SmartCEMS PEMS Analyzer, Continuous Parametric Monitor, Alternative Emission Monitor, and Compliance Assurance Monitor and from remote connected hardware devices such as CMC’s Remote Terminal Unit. The system gathers all compliance emission data and allows ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
Capable of measuring up to five different gases simultaneously, the 910 is a complete analysis system, with a sample extraction and transport designed for maintaining sample integrity. Delivering multi-component analytical performance that typically requires two or more separate analyzers, it provides a cost-effective alternative for the monitoring of multiple gases. An optional zirconium oxide ...
-
Manufactured by Servomex - a Spectris Companybased in USA
High performance carbon dioxide and oxygen monitoring in the only fully portable format currently available for CEM testing and verification. The MiniMP is a high performance CO2 and O2 gas analyzer you can really depend on. With easy and intuitive operation and single or dual CO2 and O2 measurement functions, MiniMP is ideal for a wide range of measurement ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
The 920 is a multi-gas analyzer specifically configured to monitor the stack emissions of multiple pollutants on a concentration basis. Combining hot-wet analysis with reliable ultraviolet-based measurements, the 920 delivers multi-range sulfur dioxide measurements, alongside simultaneous, independent measurements for nitric oxide and nitric ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you