Only show results available in Connecticut? Ok

Continuous Gas Monitoring Applications

  • Premium

    Industrial gas detection solutions for chemical plants sector

    One of the largest users of gas detection safety equipment are Chemical Storage and Chemical Manufacturing Plants. Toxic, asphyxiant, and flammable gases are commonly used in manufacturing and are also by products of the manufacturing process. Storage of these gases is done on site in large metal cylinders. The transferring of gas into other containers or to other parts of the plant can release these gases into the air. Portable and Fixed gas detections systems work together to provide a safety net of gas detection...

    By DOD Technologies Inc based in Cary, ILLINOIS (USA).

  • Premium

    Industrial gas detection solutions for semiconductor manufacturing processes sector

    Semiconductor manufacturing processes involve highly toxic substances and flammable gases. Our ChemLogic 96 Continuous and DOD64 FTIR Sequential gas analyzers are staples in this industry with over 1,000 machines operating every day worldwide. Our gas analyzers can be found in a few different places throughout a fabrication facility such as: In the Wafer Reactor, Wafer Dryer, Gas Cabinets, and during Chemical Vapor Deposition. Our units are designed with clean environments in mind. With a sample draw of 400 feet...

    By DOD Technologies Inc based in Cary, ILLINOIS (USA).

  • Premium

    Industrial monitoring solutions for the de-NOx plants areas

    In recent years the number of Selective Catalytic Reduction (SCR) and Selective Non-Catalytic Reduction (SNCR) plants for De-NOx have increased significantly. Continuous analysis of NOx prior to the de-NOx plant is often required to measure the concentration generated by the combustion process. This may be required to provide feed-forward to the Ammonia/Urea injection system and also to allow the effectiveness of the reduction process to be assessed. Continuous analysis of NOx post-reduction is required to allow...

    By Codel International Ltd based in Bakewell, UNITED KINGDOM.

  • Premium

    Gas analyzers and monitoring systems for Raw gas measurements

    Real-time and Accurate Process Data; Process measurements are a standard tool in following different process variables and gaining important knowledge about your process. With real-time and accurate process data, understanding your process in detail becomes easier and quality of process control increases.

    By Gasmet Technologies Oy based in Vantaa, FINLAND.

  • Premium

    Gas monitoring instruments and systems for anesthetic gases

    The anesthetic gases and vapors which leak into the indoor atmosphere during medical procedures are considered waste anesthetic gases (WAGs). The exposure is of relevance to thousands of professionals in hospitals, operating theaters, patient recovery rooms, dental offices, and veterinary clinics around the world, who may be continually exposed to the waste anesthetic gases during their workday. Typical gases of concern include nitrous oxide N2O and several halogenated compounds in vapor form, such as sevoflurane,...

    By Gasmet Technologies Oy based in Vantaa, FINLAND.

  • Premium

    Process instrumentation and analytics solutions for metals industry

    Continuous monitoring of HF concentration in aluminum smelters is a key issue for optimization of aluminum production. Continuous gas analyzers support the steel industry by helping facilities optimize processes and reduce expenses.

    By Siemens Industry, Inc. - Process Analytics based in Houston, TEXAS (USA).

  • Measurement solution for on-line carbon bed system

    Commonly, activated carbon beds are used as abatement systems on plant, with emissions being reduced by adsorption onto the bed. The efficiency of any abatement system is critical to its operation, not just in ensuring emissions are reduced as much as possible, but an efficient bed has cost savings for the operator.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Gas Detection Solutions for Sour Gas

    The sour (H2S) content of hydrocarbon fields worldwide is increasing, and many natural gas fields have very high H2S – sometimes in excess of 50%. H2S is extremely dangerous because, although people can smell it at low levels (about 5 ppb) it does not smell much worse at the exposure limit value of 10 ppm or at potentially fatal levels in excess of 100 ppm. Therefore smell is an unreliable means of determining dangerous levels. Existing H2S point sensors are maintenance intensive, slow to respond and...

    By Boreal Laser Inc. based in Edmonton, ALBERTA (CANADA).

  • Gas Monitoring and Leak Detection in Underwater Application for the Offshore Oil and Gas

    With over 300 sensors and systems sold world-wide and over 35 scientific users publications, Franatech is market leader for underwater methane detection and monitoring. Franatech is a developer and supplier of sensors for detection of gases in water. The company has more than 15 years experience in subsea applications, working with all kinds of sensing technologies. Coming from a scientific environment and further engaged in long term co-operation with universities and institutions, the company has been involved...

    By Franatech GmbH based in Lüneburg, GERMANY.

  • NH3 Monitoring in Air

    NH3 (Ammonia) is a colorless gas with a distinctive pungent smell. Ammonia monitoring is essential in coal-fired power plants, where NH3 is used to reduce NOx emissions. The ammonia consumes all of the NOx, but its high concentration that is needed for these purposes also starts reacting with other things and in the process can clog up filters and cause premature failure of expensive SCR equipment and pre-heaters. Not to mention that these high levels create an irreparable damage to the environment.

    By Unisearch Associates Inc. based in Concord, ONTARIO (CANADA).

  • Continuous Emissions Monitoring

    Requirements for monitoring emissions to air are governed by EU/UK legislation and are implemented in the form of a permit by the Environment Agency or local authority. The Dr Foedisch muti-component gas analysers continuously extract a gas sample from the exhaust stream via a stack probe into the analyser cabinet. Both hot and cold gas systems are available, please contact us to discuss which system best suits your requirements.

    By CEM Solutions (UK) Ltd. based in Darley Dale, UNITED KINGDOM.

  • Laser Dispersion Spectroscopy Technique for Process Industries

    Accurate, dependable real time results in harsh environments. Industrial processes typically result in some of the most challenging gas measurement environments; high-temperature, high humidity, particulate matter, and gas mixtures of complex and variable composition.

    By Mirico based in Chilton, UNITED KINGDOM.

  • Laser gas detection for environmental compliance

    Axetris laser gas detection OEM modules are used in a variety of environmental applications: Biogas Detection, Continuous Emissions Monitoring CEM, Fugitive Emissions, Natural Gas Detection.

    By Axetris AG based in Kaegiswil, SWITZERLAND.

  • Air Quality Monitoring Equipment for Automotive Industry

    Engine and vehicle emissions testing involves complex routines and audit regimes to meet with exacting modern legislation. The methods for measuring gases are also prescribed by the relevant authority and so you might imagine that the equipment for emissions testing is all the same. Signal take a different approach to our competitors. By designing bespoke systems from a selection of standard modules, we supply all the equipment and features you require, but nothing that you don`t. This makes our systems the...

    By Signal Group Ltd based in Camberley, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you