Continuous Mercury Monitoring Equipment For Monitoring And Testing Available In Nova Scotia
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Cold Vapor Atomic Fluorescence (CVAF) is a powerful technique based on detecting fluorescence light emitted by the sample. Below the principle of the technique is explained in a ...
-
PremiumManufactured by ENVEAbased in FRANCE
The mercury analyzer PA-2 is used for continuous monitoring of mercury concentrations in industrial processes. The PA-2 was specially designed for process analysis and operation under harsh industrial condition. The system comes with either the VM-3000 or the UT-3000 photometer to meet different requirements regarding accuracy and sensitivity of ...
-
PremiumManufactured by ENVEAbased in FRANCE
Automatic systemdesigned for continuous mercury monitoring in natural gas even in hazardous zones (ATEX, IEC-Ex). Each mercury on-line system will differ in sample characteristics as well as installation conditions and operating environment. We have the experience to design systems that fully meet the requirements of your particular mercury monitoring ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran Mercury CEM (HgCEM) Systems are currently operating at over 130 sources to comply with strict US EPA regulations. In addition, there are numerous installations in Asia and Europe. For every installation, we have met and exceeded all performance requirements for our customer’s state and federal regulations. The Series 3400 is designed to measure total gaseous mercury emissions, ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran Series 3300Xi Mercury CEM is in place at over 130 sources in the U.S. For every installation, we have met and exceeded all performance requirements for our customer’s state and federal regulations. Tekran® is the most experienced mercury monitoring resource in the world and continues to lead in mercury compliance monitoring, abatement system control and mobile testing ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran® Model 3400-AIR Air Filtration System is an inexpensive, convenient conditioning unit for plant compressed air. The Tekran® Series 3400 Mercury CEM requires two types of air in order to operate. Motive air is required to drive the inertial filter sample flow via an eductor. Zero Air is used for dilution and calibration functions. Both types of air should be dry, oil free and ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekrarr Model 1308 Recirculating Water Purification System is an inexpensive, convenient source of deionized, mercury-free water for the Series 3300Xi Mercury CEM. The system has two stages of pre-filtration to eliminate all particulate and organic contamination in the water. A reverse osmosis (R/O) unit then removes the bulk of ionic material. Two stages of finishing ion exchange (IX) resin ...
-
PremiumManufactured by ENVEAbased in FRANCE
The SM-3 mercury analyzer measures continuously the elemental, bound and ionic mercury in stack fluegas. The operating principle of the SM-3 is based on a completely new technique: mercury compounds cracking and the reduction of ionic mercury contained in stack gas is performed applying the thermocatalytic method. Wet chemical sample gas treatment using reagents and bubblers is avoided. ...
-
PremiumManufactured by ENVEAbased in FRANCE
Beneficiary of over 20 years of experience in mercury measurement, the new SM-5 CEMS Hg analyzer is designed to provide extremely accurate and reliable continuous measurements of very low concentrations of Hg in flue gas emissions. The SM-5 features short response times, dynamic ranges and stable measurement under all ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran Model 1306 Water Filtration System is an inexpensive, convenient source of deionized, mercury free water for the Series 3300 Mercury CEM. With two stages of pre-filtration eliminating particulate and organic contamination, the final stage R/O membrane and ion-exchange filters have extremely long ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran Model 3400-WTR Water Filtration System is an inexpensive, convenient source of deionized, mercury free water for the Tekran 3400 Mercury CEM. With two stages of pre-filtration eliminating particulate and organic contamination, the final stage R/O membrane and ion-exchange filters have extremely long life. The Model 1306 can supply enough water for up to four CEM systems. The filter ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran Model 1304 Air Filtration System is an inexpensive, convenient conditioning unit for plant compressed air. The Series 3300 Mercury CEM requires two types of air in order to operate. Motive air is required to drive the inertial filter sample flow via an eductor. Zero Air is used for dilution and for the generation of calibration gas. Both types of air should be dry, oil free and ...
-
PremiumManufactured by Lumex Instrumentsbased in CANADA
RA-915AMNG monitors are designed for continuous mercury measurements in a natural gas stream and are ideal for permanent unattended installation at the gas monitoring stations. RA-915AMNG monitor for natural gas allows direct rapid analysis of mercury in natural gas, enables prompt reaction to variations of mercury concentrations in the stream, monitoring of the MRU units and other ...
-
PremiumManufactured by Lumex Instrumentsbased in CANADA
RA-915AM monitors are designed for continuous mercury measurements in ambient air, indoor air and in natural gas. Ideal for permanent unattended installation at air monitoring stations, RA-915AM monitor for ambient air allows ultra-sensitive measurements of background Hg concentrations and is compliant with the European standard EN 15852 for ambient air ...
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Continuous Mercury Monitoring systems CMM AutoQAL and CMM systems are the perfect solutions for monitoring mercury continuously from hot, wet and corrosive gas streams. These future-proof systems have the lowest certified range in the world (0-5 µg/m3) and CMM AutoQAL has an automatic and integrated QAL3 validation ...
-
Manufactured by Nippon Instruments North Americabased in USA
The EM-5 is intended for continuous monitoring of any gaseous mercury present in work environments. The EM-5 has sensitivity down to 0.001mg/m3, complying with the safety limits of 0.015mg/m3 set by the W.H.O. An external gas scrubber option can be coupled to remove interference. Each EM-5 can be connected with a line switching module for 2 to 8 ...
-
Manufactured by P S Analytical Limitedbased in UNITED KINGDOM
The PSA 10.525 Sir Galahad analyser is specifically designed for measuring mercury in gaseous samples at both online and offline installations. Sampling is via a dual purge and trap arrangement incorporating specific Amasil traps operating in either a continuous or remote operation. The analyser complies with both ISO 6978:2 and ASTM 6350-98 methods for measuring mercury in natural gas. Mercury ...
-
Manufactured by P S Analytical Limitedbased in UNITED KINGDOM
Mercury Vapour Generators are used to produce a known concentration of mercury for a range of applications including: Calibration of Mercury Monitors and Mercury Analysers. System integrity test. Sampling system testing for losses/drift. Spike testing Mercury Monitors and Mercury Analyser Systems. Spiking process for Catalyst removal efficiency ...
-
Manufactured by Nippon Instruments North Americabased in USA
The ARA-6 is a continuously monitoring mercury system for liquid samples taken from industrial waste water, river water, drinking water, etc. The ARA-6 performs a fully automated sample collection, preparation, and measurement. The small sample size needed (5ml) allows for cost savings not only involving reagent consumption, but also decreases waste ...
-
Manufactured by P S Analytical Limitedbased in UNITED KINGDOM
The P S Analytical range of mercury continuous emissions monitors (CEMs) is designed to handle all types of industrial and research applications. The CEM is based on modules (click here) which allow the systems be customised to specific user requirements. The majority of CEMs fall into three broad categories which can be summarised as general purpose, dedicated monitoring or compact instruments. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you