Cooling Tower Monitoring Equipment For Monitoring And Testing Available In Zimbabwe
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
2H SANIPACKING fill media are made of a special antibacterial Polypropylene (PP) compound. The biocide impregnated compount disrupts the metabolic process of unwanted micro-organisms at the cell wall level, thus interrupting their ability to function, grow and reproduce on the 2H SANIPACKING Combined with regular maintenance and correct water treatment in the cooling circuit to prevent the ...
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
Reduction Of Risk Of Legionella Pneumophila In Open Cooling Circuits; Time and again news report about outbreaks of legionella disease in areas near cooling towers. Careful water treatment, together with regular maintenance reduces the risk of bacteria growth in the cooling circuit. But one step more leads to an even higher performance of these measures: the use of anti-legionella components. ...
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
2H SANIPACKING drift eliminators are made of a special antibacterial PP compound. The biocide impregnated compound disrupts the metabolic process of unwanted micro organisms at the cell wall level, thus interrupting their ability to function, grow and reproduce on the 2H SANIPACKING. Combined with regular maintenance and correct water treatment in the cooling circuit to prevent the formation of ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Advanced Energy’s Andros 6511 gas analyzer offers unparalleled accuracy and performance. It’s designed to meet and exceed performance requirements for portable or fixed leak detectors of toxics or combustibles. Superior performance and reliability. Enhanced optics and electronics. Highly accurate calibration. Extensive software architecture. Rapid ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Advanced Energy’s Andros 6500 and 6520 gas analyzers offer unparalleled accuracy and performance via simplified design and implementation. Unlike analyzers that require moving components, the 6500 and 6520 use pulsed-infrared sources to achieve high accuracy and reliability. Highly accurate calibration. High stability and rapid warm-up. Unique optical architecture. Comprehensive software ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Advanced Energy’s Andros 6552 gas analyzer is available with two gas channels and can be applied to any type or combination of refrigeration systems that employ FreonsTM and carbon dioxide. Ability to measure up to five gases. Rapid warm-up. Highly accurate calibration. Simple and fast system integration. RS232 or USB ...
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
Exhaust Air Cleaning in Stables: Dust and ammonia are the substances to be cleaned from the waste air. Prescribed are cleaning efficiencies from 70-90% depending on where the sheds/stables are located. To efficiently and economically comply with this task, filling materials are needed which can be used in both counter and cross-flow applications (e.g. tunnel ventilation) in local waste air ...
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
In all different types of cooling towers drift eliminators are used to reduce the loss of water and emissions. Above the water distribution and the cooling fills, a layer of drift eliminators is installed for this purpose. It catches the water drops which are carried away with the air flow and redirects them into the cooling water ...
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
Modern re-cooling systems need to consider aspects of the environment and sustainability. For cooling towers this means it is important to reduce the loss of water and emissions. Therefore drift eliminators are used. They are installed above the water distribution and cooling fills and catch the water drops that are carried with the air flow and redirects them into the cooling water circuit. 2H ...
-
PremiumManufactured by Kurita Water Industries Ltdbased in JAPAN
S.sensing MX is a new, modular analyzer system especially designed for industrial cooling water applications. The modular system contains different types of sensors and analyzers connected to one central cooling tower controller. This allows fitting S.sensing MX to practically any ...
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
Optimal heat transfer properties – low pressure drop; Generally, every cross fluted fill could be cut to be installed in a cross-flow cooling tower. Such a fill, however, would not perfectly fit the requirements; we therefore developed a special range of fill for this type of tower (FX12.12 or KSN with a drift eliminator section KSA and air inlet louvre section ...
-
PremiumManufactured by Kurita Water Industries Ltdbased in JAPAN
Microbiology, biofilm, Legionella, Pseudomonas are sources for several problems in water systems and therefore of main concern in the industry. A system not properly controlled can lead to high economic losses and have a direct impact on the health of the ...
-
Manufactured by Kuul Evaporative Cooling Mediabased in USA
Kuul Evolution FirePro DE– Meets Strict UL 900 Standards. Fire protection is a mission critical task, and you’ll need the best evaporative cooling media to maintain safe conditions. Our Kuul Evolution™ series is a premiere line of specialized evaporative media, ensuring you receive the results you need. When you’re looking for drift eliminator technology, we’ve got ...
-
Manufactured by Torraval Cooling S.L - part of The MITA groupbased in SPAIN
PMM are open circuit cooling towers of counter-flow composed of factory pre-assembled modules. Its capacity goes from 2.6 to 14 MW (aproximate value, taking as a reference a cell, a thermal range of 5ºC, laminar filling of 19 mm and modular systems). The PMM series is proposed in big-size plants. Each unit is engineered according to the technical data of the relevant project. All models are ...
-
Manufactured by Wuxi Sanjiu Cooling Equipment Co., Ltd.based in CHINA
GOM-F Series are open cooling towers with fiber reinforced plastic enclosure and galvanized steel supporting structure, factory assembled or field-erected, crossflow fill, designed to serve HVAC, refrigeration systems, and many other industrial process fluids cooling. Comparing to steel cooling towers, FRP towers are more economical as an option of lower initial ...
-
Manufactured by Emerson Process Managementbased in USA
The remote sensor system links pressure transmitters digitally for easy and reliable level measurement of tall vessels and distillation ...
-
Manufactured by BERG Chilling Systems Inc.based in CANADA
Berg’s line of fiberglass industrial cooling towers are manufactured of extra thick fiberglass and premium quality components to provide years of trouble-free, low maintenance performance. They feature a host of standard features and are supplied fully assembled on a structural steel integral base for easier installation and ...
-
Manufactured by Tramspreadbased in UNITED KINGDOM
Available in spread widths from 8m (single outlet) up to 24m (triple outlet), the TRAMSPREAD spread nozzle applicators are built to a high quality and are fully galvanised. With attention to setting of height and output angle on the twin outlet boom it is possible to produce a spread pattern with a coefficient of variation of below 20% in the field. A low level spread with large droplets ensures ...
-
Manufactured by Ducom Instruments (USA) Inc.based in USA
A VERSATILE WEAR AND FRICTION TESTER FOR EVERY TRIBOLOGY LAB. The modular POD-4.0 is a tribometer with many capabilities. Use it as a pin/ball on disk for rotary tests, linear reciprocation or traction measurement simply by choosing the right module. Its automation, sensitivity and ultrawide range of operation make its capabilities unmatched. ...
-
Manufactured by WITec GmbHbased in GERMANY
access is a micro-Raman single-spot analysis and mapping microscope. It was specifically engineered for budget-conscious customers with high demands on instrument performance. Its outstanding spectral quality, optical throughput and signal sensitivity are ensured by well-established WITec optical elements. The high-quality microscope setup of the access is also the basis for its full ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you