Crack Monitoring Equipment For Monitoring And Testing Available In Yemen
-
PremiumManufactured by Inertial Labs, Inc.based in USA
The Railway Motion Control Unit – RMCU is a high-performance strapdown system developed for Railway applications to determine the absolute orientation (Heading, Pitch, and Roll) and motion parameters (Angular Rates and Linear Accelerations) for any Railway Platforms on which it is mounted. Orientation is determined with high accuracy for both motionless and dynamic ...
-
PremiumManufactured by Fiberscope.net by Medit Inc.based in CANADA
The TROGLOPROBE PRO pipe inspection camera is designed to be fully portable device, powered by an advanced power cell which allows up to eight hours of operation on a single charge, and recharging can be achieved in mere hours. The power cell simply snaps into the frame and is automatically connected to the system. The camera system utilizes the proven reliability of the T812 pan-and-tilt camera ...
-
Manufactured by Hebei Chemtech Wencheng Trading Co., Ltd.based in CHINA
Concrete welded mesh is made with accurate and uniform wires. These rebars are welded firmly. Our concrete welded mesh is purposed for reinforcing flat concrete, mainly used for concrete floor slabs and walls as well as industrial buildings. The reinforcing steel bars are welded firmly which are not easy to crack. It's also called reinforcing ...
-
Manufactured by Specialty Products Inc. (SPI)based in USA
WATERSAFE™ II is formulated for high tensile and elongation properties to bridge cracks and accommodate movement on cementitious substrates. WATERSAFE™ II is ANSI/NSF 61 compliant as tested by an ANSI accredited lab and is approved for direct contact with potable water. It is a fast setting, rapid curing, 100% solids, flexible aromatic, two component spray polyurea that can be applied ...
-
Manufactured by Shanghai Horse Construction Co., Ltdbased in CHINA
Carbon fiber and epoxy polymer lamination especially for Horse pre-stressed carbon fiber reinforced polymer(CFRP) laminate system, with high strength and ...
-
Manufactured by A & D Technology, Inc.based in USA
The A&D Flat Belt Tire Test Rig is an indoor tire force and moment testing machine. It allows the tire to be tested against a flat surface under dynamic conditions. The flat surface is emulated by an electrically controlled belt-pulley assembly while the tire load is supported by an air bearing (for passenger cars loads) or a water bearing (for higher loads) that is present under the belt. ...
-
based in INDIA
NEO Monitors LaserGas™ is using Tuneable Laser Absorption Spectroscopy (TLAS) i.e a non-contact optical measurement method employing solid-state laser sources. The sensor remains unaffected by contaminants corrosives and does not require regular maintenance. The absence of extractive conditioning systems further improves availability of the measurements and eliminates errors related to ...
-
Manufactured by Ackciobased in SINGAPORE
Supports 8 sensors; (8 vibrating wire channels and 8 thermistor ...
-
Manufactured by General Equipment Companybased in USA
3.5 HP Briggs & Stratton gasoline engine. 8.0 inch inlet and outlet diameter. Cast aluminum fan and blower housing construction; spring mounted on skids. Less duct. Free Air Flow: 1561.6 CFMGeneral’s line of portable air blowers can accommodate most non-hazardous confined space ventilation requirements. Select from 8.0 inch and 12.0 inch diameter units with power choice of gasoline ...
-
Manufactured by SHM Systembased in POLAND
No more plaster and glass indicators, no more inaccurate crack assessment! The SHM-X crackmeter is a simple and inexpensive, but still professional and effective tool for measuring changes in crack and expansion joint widths. The low cost of the measuring point, quick installation, vandal and weather resistance are the main advantages that make SHM-X the choice of experts and site managers. The ...
-
Manufactured by Geosense Ltdbased in UNITED KINGDOM
VWCM-4000 crack meters are used to measure movement across surface cracks and joints in concrete, rock, soil and structures. They consist of a sensor outer body tube and an inner free-sliding rod which is connected at the internal end to a vibrating wire sensor by a spring. At the sensor end of the outer body and the external end of the rod anchors are attached which can be fixed either side of a ...
-
Manufactured by Hebei Chemtech Wencheng Trading Co., Ltd.based in CHINA
Concrete weld mesh is made firmly with machine. They are mainly used in bridge, road, housing foundations. Our concrete welded mesh is purposed for reinforcing flat concrete, mainly used for concrete floor slabs and walls as well as industrial buildings. The reinforcing steel bars are welded firmly which are not easy to crack. It's also called reinforcing ...
-
Distributed by QuakeWrap Inc.based in USA
Glass Fiber Reinforced Polymer (GFRP) or Carbon FRP offer economical and efficient solutions for strengthening concrete beams for flexure and shear. The technique works for strengthening concrete, steel, timber and glulam ...
-
Manufactured by Resensys, LLCbased in USA
The Resensys IoT sensor is versatile and provides an easy and inexpensive way to install a scalable solution for distributed structural integrity monitoring. It can measure two separate displacement ...
-
Manufactured by Propex Operating Company, LLCbased in USA
The new and improved Novomesh 950 secondary reinforcement system for concrete is a blend of polypropylene/polyethylene high performance macro-monofilament fibers with geometrically designed, patented sinusoidal deformations and 100% virgin polypropylene micro-synthetic fibers containing no reprocessed olefin materials. With a wider cross-section resulting in an increased surface area of the macro ...
-
Manufactured by SHM Systembased in POLAND
The only measurements of this kind in Poland! Data on the structural behaviour obtained using our Nerve-Sensors are a source of unique and expert knowledge. If you are a researcher, PhD student, R&D representative, contract manager or site manager – this offer is just for ...
-
Manufactured by Novatest S.r.l.based in ITALY
The isplacement transducers commonly used for the automatic and continuous acquisition of measurements during structural monitoring or load tests. Completely made of stainless steel, they can be equipped with eyelets for wall fixing or with spring testator for load tests with suitable support bracket and telescopic stand. Available with different measurement ...
-
Manufactured by ELE Internationalbased in UNITED KINGDOM
Specifically designed for measuring crack width in concrete, this high definition microscope operates via an adjustable light source provided by high power batteries. Supplied in a pocket sized carrying case. Crack Detection Microscope Magnification X 40 Measuring Range of 4mm In 0.02mm ...
-
Manufactured by HOREICH UGbased in GAMBIA
Fully automatic recording of cracks, gaps or changes in length. High-precision electronics with a resolution of at least 0.01mm. Automatic warning by email if limit values are exceeded. Wireless data transmission with different radio standards (NB-IoT, CAT-M, GSM). Convenient monitoring of measured values via dashboard with personal login. Pre-calibrated system – easy to install and get ...
-
Manufactured by Move Solutionsbased in ITALY
Our Single Channel Node is a wireless data logger that makes geotechnical probes suited for LoRaWAN wireless communication. Each node supports one technical probe and the probe's internal NTC (when present). The Single Channel Node can be configured on our Move Cloud Platform: you can set different parameters remotely and monitor the data collected at any time. This new Node comes with increased ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you