Current Meters Equipment For Monitoring And Testing Available In Liechtenstein
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
A portable monitoring device using conductive cell technology for accurate, periodic measurements of the Acid Dewpoint Temperature (ADT) in combustion processes. Designed specifically to provide the unique but vital measurement of sulphuric acid dewpoint temperature, the portable Lancom 200 supports boiler efficiency checks, corrosion protection and the management of high-cost fuel ...
-
PremiumManufactured by General Oceanics Inc.based in USA
Weight in water 113 grams (4 ounces) material: celcon rotor, nickel plated brass nose cone, polycarbonbate body, armaloyed stainless steel main rotor and idler gear shaft. Dimensions length 21.3 cm (8 3/8') diameter: standard rotor 6.98cm (2 3/4') low velocity 16.5cm (6.5'), depth rating unlimited (free flooding) data display: 6 ten digit counter wheels 000,000 to 999,999 distance determined by ...
-
PremiumManufactured by Aanderaa, a Xylem Brandbased in NORWAY
The single-point current meter series are a completely new generation of current meters based on the SEAGUARD® datalogger platform and the ZPulse® multi-frequency Doppler Current Sensor (DCS). SEAGUARD® Products are based on modern technology and are the basic modules of our underwater observatory. They may be used as a multi-parameter instrument in the sea and in freshwater and ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The DF-60810DT Series Air Sampling Systems are designed for remote unattended continuous air sampling applications. The DF-60810DT Series Air Samplers feature a brushless motor with electronic motor speed control that maintains a user selectable flowrate. The flowrate range attainable through the filter media is dependent upon the air porosity of the filter media. The DF-60810DT Series design ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
This small, lightweight mechanical current velocity meter has a measuring range of approximately 0.1 m/sec. to 7.9 m/sec. The meter is used for current velocity measurements in rivers, channels, sewage systems, pipes, etc. Suspended from a wire the meter can be applied at great depth. The meter is balanced in such a way that it will remain in a horizontal position even if the meter for instance ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The GAS-604DTE Series Air Sampling Systems are designed for remote unattended continuous air sampling applications. The GAS-604DTE Series Air Samplers feature a brushless motor with electronic motor speed control that maintains a user selectable flow rate. The flow rate range attainable through the filter media is dependent upon the air porosity of the filter media. Flow rates as high as 85 m3/hr ...
-
PremiumManufactured by General Oceanics Inc.based in USA
The model 2030CF Calibration Frame provides a check on the proper operation of your Model 2030 and 2031 series flowmeters. The frame imparts a torsionally precise spin to the rotor and a count difference is noted in the flowmeter window. A minimum count is necessary for the flowmeter to be within calibration. The General Oceanics Model 2030CF Calibration Frame provides a check on the proper ...
-
PremiumManufactured by Mobiltex Data Ltdbased in CANADA
Gain deep insight into the performance of your CP system with the continuous remote monitoring capabilities of the CorTalk RMU2. Simple to install and configure, the CorTalk RMU2 is an accessible and robust system engineered for continuous remote monitoring of rectifiers, bonds and test points. The device is available in satellite or cellular communication configurations and can operate ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The DF-604DTE Series Air Sampling Systems are designed for remote unattended continuous air sampling applications. The DF-604DTE Series Air Samplers feature a brushless motor with electronic motor speed control that maintains a user selectable flowrate. The flowrate range attainable through the filter media is dependent upon the air porosity of the filter media. The DF-604DTE Series design ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The DF-804DT Series Air Sampling Systems are designed for remote unattended continuous air sampling applications. The DF-804DT Series Air Samplers feature a brushless motor with electronic motor speed control that maintains a user selectable flow rate. The flowrate range attainable through the filter media is dependent upon the air porosity of the filter media. The DF-804DT Series design ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
The FS10i is a compact, economical solution to air and compressed air flow metering. It is the first, and currently only, thermal mass flow meter to meet SIL 2. Utilizing application proven thermal mass flow technology, the FS10i provides a highly accurate and repeatable linearized 4-20 mA output of flow rate. Additionally, for applications benefiting from a high or low flow alarm point, the ...
-
PremiumManufactured by KISTERSbased in GERMANY
HyQuest Solutions’ IP datalogger iRIS 350FX has been designed and constructed for use in harsh outdoor and industrial environments. It is compact, cost effective and easily con?gured, with support for a wide range of instrumentation. The communication slots support wireless 3G modem, Iridium satellite, ethernet, RS232, SDI-12 and modbus slave protocol for SCADA. An integral wireless modem ...
-
PremiumManufactured by General Oceanics Inc.based in USA
Electronic digital flowmeter for velocity measurements, with 18" pigtail & underwater connector, low speed rotor used in conjunction with the 2135 or ...
-
PremiumManufactured by Aanderaa, a Xylem Brandbased in NORWAY
A self-recording dedicated current meter with Bluetooth for communications and data retrieval - now with the possibility to integrate a pressure sensor! The RCM Blue is a self-recording Current Meter which also measures water temperature in salt or fresh water, and a battery container with battery capacity up to ...
-
PremiumManufactured by Aanderaa, a Xylem Brandbased in NORWAY
The acoustic based wave instrument, SeaGuardII DCP Wave, the swiss army knife of ADCP's with the possibility to measure Ocean Waves, Ocean Currents, Tide and Water quality all from one single instrument. The acoustic based wave SeaGuardII DCP Wave, the swiss army knife of ADCP's with the possibility to measure Ocean Waves, Ocean Currents, Tide and Water quality all from one single instrument. For ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Limit level detection of conductive liquids, a measurement systems consists of a double rod electrode and an ER-107 ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The GAS-60810DT Series Air Sampling Systems are designed for remote unattended continuous air sampling applications. The GAS-60810DT Series Air Samplers feature a brushless motor with electronic motor speed control that maintains a user selectable flow rate. The flow rate range attainable through the filter media is dependent upon the air porosity of the filter media. Flow rates as high as 200 ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
B152R41 / B152R41S15: Mass flow measuring system with an additional resettable, adding and subtracting counter. B152R51: Mass flow measuring system ( battery-operated with charge indicator). Battery operation enables an application independent of the power supply. With this device, gas monitoring is just that simple. Gas quantities which are filled in and recovered are registered and can be ...
-
PremiumManufactured by General Oceanics Inc.based in USA
Flowmeter, digital, mechanical, w/standard rotor response with the standard rotor-threshold approximately 10cm/sec (1/5 knot). Range 10cm/sec (1/5 knot) to 7.9m/sec approximately (15 knots) weight in water 113 grams (4 ounces) material: celcon rotor, nickel plated brass nose cone, polycarbonbate body, armaloyed stainless steel main rotor and idler gear shaft. Dimensions length 21.3 cm (8 3/8") ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The DF-804DTE Series Air Sampling Systems are designed for remote unattended continuous air sampling applications. The DF-804DTE Series Air Samplers feature a brushless motor with electronic motor speed control that maintains a user selectable flow rate. The flowrate range attainable through the filter media is dependent upon the air porosity of the filter media. The DF-804DTE Series design ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you