Cyanide Monitoring Equipment For Monitoring And Testing Available In Lebanon
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The 2026 Titrolyzer performs potentiometric titrations by means of a high precision burette system and high performance electrodes. Different titration types include acid/base, redox and precipitation titrations. A self-finding inflection point technique can be applied for most applications. It is also possible to use the analyzer to measure pH in situations where inline sensors would otherwise ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
Under the condition of the weak acid, cyanide of water sample and chloramine T generate chloramine cyanide; and then react with isonicotinic acid; after the hydrolysis generates pentene dialdehyde, finally, together with barbituric acid generate purple blue compounds, in a certain concentration range, the chroma is proportional to the concentration of cyanide. It applies to the cyanide monitoring ...
-
Manufactured by Advanced Calibration Designs, Inc. (ACD)based in USA
The MiniBump is an ultra-small calibration gas instrument specifically designed for 'bump' testing chlorine, hydrogen, hydrogen cyanide and hydrogen sulfide gas ...
-
Manufactured by Boreal Laser Inc.based in CANADA
Boreal Provides The Solution To Mobile Gas Detection; Boreal has provided gas detection solutions to land based vehicles for the last 18 years. The analyzer combines GPS location data to give highly accurate positioning for fugitive emission leaks. The live read-out display and alarm provide the operator with instantaneous gas concentration ...
-
Manufactured by ENMET, LLCbased in USA
HAZMATCAD Plus™ is a multifunction handheld instrument that detects and classifies chemical warfare agents, Nerve (G) and Blister (H), with an integral electrochemical sensor array for Toxic Industrial Chemicals (TIC). When compared to other chemical agent multi threat technologies HAZMATCAD Plus™ is designed to be reliable, fast to start up, easy to operate and avoid false alarms ...
-
Manufactured by MirSensebased in FRANCE
To monitor HCN Hydrogen Cyanide ~713 cm-1 wavelength. The UniMir products are Distributed Feedback (DFB) Quantum Cascade lasers (QCL) that emit CW (continuous wavelength) inf rared light at room temperature. The laser is mounted on a thermoelectric cooler inside a hermetically sealed High Heat Load (HHL) package integrating a collimation lens and a thermistor to readout the laser chip ...
-
Manufactured by Sensit Technologiesbased in USA
SENSIT GOLD is a portable gas leak detector and multi-gas confined space monitor in one user-friendly instrument. As an investigative tool, SENSIT GOLD LEL sensor is designed to find the source of combustible gas leaks fast. Additional sensors provide personal protection from hazardous gas ...
-
Manufactured by Sensit Technologiesbased in USA
SENSIT GOLD 100 is a portable multi-gas leak detector and confined space monitor with expanded in-field capabilties. SENSIT GOLD 100 pinpoints natural gas or propane gas leaks. This instrument can also be used for inert gas operations to detect combustible gases in oxygen-free ...
-
Manufactured by ULPATEK Air Filter Manufacturing Inc.based in TURKEY
Oxidized gases are converted into CO2, water and salt. Higher efficiency and adsorption capacity than activated carbon. Contains 11% potassium permanganate. Target Gases; Hydrogen Sulfide (H₂S), Hydrogen Cyanide (HCN), Nitrogen Dioxide (NO₂), Nitric Oxide (NO), ...
-
Manufactured by Global Analyser Solutions (GAS)based in NETHERLANDS
Contact GAS for a fast and robust instrument for the detection of fumigants in shipping containers. GAS is a supplier of reliable analyser solutions for Energy, Refinery, Chemical and Environmental markets and provides Syft-MS for fast ppb detection of fumigants. Syft-MS is widely acknowledged as the standard for container air analysis and detects fumigants easily on location, using a simple ...
-
Manufactured by CR Clean Air Group, LLCbased in USA
Bromine and Fluorine: Bromine (Br2) and Fluorine (F2) are typically scrubbed in a counter current packed tower to achieve maximum efficiencies using a dilute aqueous alkali solution. For applications with very high concentrations of these gases it may be useful to use a Jet Venturi Fume Scrubber as a first stage to remove the bulk of the contaminant then “polish” with a packed tower ...
-
Distributed by CitiSafe Pte Ltdbased in SINGAPORE
For monitoring: Ammonia, Arsine, Carbon dioxide, Carbon monoxide, Chlorine, Chlorine dioxide, Ethylene, Ethylene oxide, Fluorine , Formaldehyde, Hydrogen, Hydrogen chloride, Hydrogen cyanide, Hydrogen fluoride, Hydrogen sulphide, Methane, Nitric oxide, Nitrogen dioxide, Oxygen, Ozone, Phosphine, Silane, Sulphur dioxide, TVOCs Simultaneously measures and records up to 15 sensors including ...
-
Manufactured by IUT Technologies GmbHbased in GERMANY
The IMS-Analyzer is a multi-gas analyzer as Ion Mobility Spectrometer (IMS) with high sensitivity in the lower ppb-range and high resolution. With this trace-gas analyzer toxic gases can be detected and identified without any enrichment directly in situ already at a very low concentration level. For the further enhancement of the selectivity and further reduction of cross sensitivities the ...
-
Manufactured by Altair Chimica S.p.A.based in ITALY
Ferrous chloride is produced by reaction of the synthesis hydrochloric acid and ferrous oxide, while ferric chloride is produced by the chlorination of ferrous chloride. Both products are available in the technical or drinking water treatment ...
-
Manufactured by ULPATEK Air Filter Manufacturing Inc.based in TURKEY
Gases are converted into Carbon dioxide gas (CO₂), water and salt. Higher eficiency and adsorption capacity than activated carbon. Contains 6% Potassium Permanganate (KMnO₄). Target Gases; Hydrogen Sulfide (H₂S), Hydrogen Cyanide (HCN), Nitrogen Dioxide (NO₂), Nitric Oxide (NO), ...
-
Manufactured by Advanced Calibration Designs, Inc. (ACD)based in USA
The Cal101 Bump Station calibration gas instruments' unique design allows for the calibration of gas detectors as well as the bump testing of them. We utilize the bump test switch on the instrument in such a way that it can be held down easily and as long as it is, the instrument will produce calibration gas at the required concentration. As soon as the user is finished with the calibration, and ...
-
Manufactured by ENMET, LLCbased in USA
The CW Sentry 3G ambient air monitor detects CWA (Chemical Warfare Agents), nerve and blister and the following TICs (Toxic Industrial Chemicals) hydrogen cyanide, phosgene, halogens, hydride chemical threats in complex urban environments. It is a fully automated system ideally suited for critical infrastructure protection and easily integrated into building control software ...
-
Manufactured by IC Controls Ltd.based in CANADA
The model 627 quick-union in-line pH sensor is offered in an easy-to-install configuration for insertion or submersion applications. The union-style threaded fitting locks in the sensor for extra safety and very easy removal. This sensor is designed to survive in cyanide, sulfides and ammonia environments often found in mines, concentractors and refineries. It is bigger and more rugged than a ...
-
Manufactured by DOD Technologies Incbased in USA
The world’s first 4G-connected integrated man down alarm equipped with a five gas monitor. In the event of an emergency, the G7c wirelessly connects your team members with live monitoring personnel to mobilize the fastest emergency response possible. Any device can be equipped with the standard 4-Gas sensor (CO, H2S, LEL, O2) plus a fifth selectable toxic sensor from a list of over ten ...
-
Manufactured by Mine Safety Appliances Co (MSA)based in USA
Based on the industry-standard ALTAIR Single-Gas Detector—but with added features and functionality—ALTAIR Pro toxic gas and oxygen detectors combine reliable detection and LED/audible/flashing/vibrating alarms with clear, backlit LCD displays. Electrochemical sensors measure concentrations of toxic gas (chlorine dioxide, hydrogen cyanide and phosphine) or percent oxygen. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you