Dataloggers Equipment For Monitoring And Testing In Israel
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Data logger for display and storing measured values from an analog and digital input. Data logger for stand-alone applications. The Minilog B is used to display and record measured data from an analog and digital input signal. It can be applied where a compact data logger is needed. In addition to data storage the data logger also monitors two set points. Violation of these set values are ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The extent to which the soil is sensitive to erosion is determined largely by the composition of the soil. Knowledge of the sensitivity to erosion is important for the development of a certain plot. The sensitivity to erosion is hard to measure. Absolute values can not be obtained. It is, however, possible to obtain a reasonable indication by means of a relative measurement. For such a ...
-
Manufactured by METER Group, Inc.based in USA
Back to basics data logger: Our customers love our flagship ZL6 data logger paired with ZENTRA Cloud for easy, full-time access to near-real-time data from anywhere in the world. But if cost is more important than convenience, and you need an ultra-robust, entry-level data logger that is easy to set up and practically maintenance free, you’ll love the ZL6 Basic—a powerful, all-in-one ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The TE525WS, manufactured by Texas Electronics, is a tipping bucket rain gage that conforms to the National Weather Service recommendation for an 8 in. funnel orifice. It measures rainfall in 0.01 in. increments. This tipping bucket is compatible with all Campbell Scientific data loggers, and it is widely used in environmental monitoring ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The P2546D, manufactured by WINDSENSOR, is a Class 1 cup anemometer commonly used in wind resource assessment and power performance applications. Each anemometer is individually calibrated compliant with IEC 61400-12-1 and is shipped with a MEASNET calibration certificate. The P2546D features permanent magnets mounted on the shaft that activate an electronic switching current. In response, this ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The WMS100 is a purpose built wind measurement system specifically designed for operational wind power plants. The WMS station delivers data shareholders, site operators and power off-takers with accurate real-time and historical meteorological data for operational performance ...
-
Manufactured by AIRSENSE Analytics GmbHbased in GERMANY
Intelligent Chemical Sensor for identification of gases and vapours. The PEN, also called E-Nose, is our small, fast and robust identification system for gases and gas mixtures. The detection of the gases is performed with an array of gas sensors. Single compounds or mixtures of gases can be identified, after a training stage, by using the pattern generated from the sensors. Using various ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The TE525, manufactured by Texas Electronics, has a 6 in. orifice and measures rainfall in 0.01 in. increments. It is compatible with all Campbell Scientific data loggers, and it is widely used in environmental monitoring ...
-
Manufactured by Aquaread Limitedbased in UNITED KINGDOM
The GPS LeveLine Meter is designed to be used with all LeveLine Water Level and Temperature loggers. The meter has many uses including LeveLine setup, data download and the novel GPS embedding feature which tags the LeveLines deployment location into the ...
-
Manufactured by R. M. Young Companybased in USA
The YOUNG Tipping Bucket Rain Gauge meets the specifications of the World Meteorological Organization (WMO). The design uses a proven tipping bucket mechanism for simple and effective rainfall measurement. The bucket geometry and material are specially selected for maximum water release, thereby reducing contamination and errors. Catchment area of 200 cm2 and measurement resolution of 0.1 mm meet ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The CR300 is a multi-purpose, compact measurement and control data logger. This small, low-cost, high-value data logger offers fast communications, low power requirements, built-in USB, and excellent analog input accuracy and resolution. The CR300 can measure most hydrological, meteorological, environmental, and industrial sensors. It concentrates data, makes it available over varied networks, ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The TE525MM, manufactured by Texas Electronics, is a tipping bucket rain gage that monitors rainfall in metric rather than US units. It measures in 0.1 mm increments and has a 24.5 cm funnel. This tipping bucket is compatible with all Campbell Scientific data loggers, and is widely used in environmental monitoring ...
-
Manufactured by METER Group, Inc.based in USA
The weather station problem: Most weather stations are cluttered, complicated, and frustrating to install and maintain. Wiring and programming all the components can be a nightmare, and finding room to mount everything can be a challenge. All-in-one weather stations solve many of these problems, but the tradeoff is flexibility. Adding just one more sensor often requires an extra data logger, ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The TB4, manufactured by Hyquest Solutions, is a high-end tipping bucket rain gage that has an 8 in. orifice and measures rainfall in 0.01 in. increments. It is ideal for locations where intense rainfall events may occur. This tipping bucket is compatible with all Campbell Scientific data loggers, and is used in environmental monitoring ...
-
Manufactured by LAMBRECHT meteo GmbH - an AEM brandbased in GERMANY
rain[e] is a new type of weighing precipitation sensor: Highest resolution combined with the most compact design. The unique self-emptying collection system enables the measurement of every single drop with the high resolution of 0.001 mm/m2. Full functionality all year around without antifreeze fluid makes the rain[e] very environmentally ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The P2546C, manufactured by WINDSENSOR, is a Class 1 cup anemometer commonly used in wind resource assessment and power performance applications. Each anemometer is individually calibrated compliant with IEC 61400-12-1 and is shipped with a MEASNET calibration certificate. The P2546C features a durable construction and is suitable for both on-shore and off-shore environments. The “C” ...
-
Manufactured by DEWESoftbased in SLOVENIA
Compact, mobile data acquisition system with a built-in data logger, powerful data processing computer, multi-touch display, and internal batteries for maximum ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you