Dataloggers Equipment in Thailand

  • Premium

    HORIBA - Model SMA-371 - Datalogger

    The HORIBA SMA-371 data logger can be used both, in the online and in the offline operating mode. In the online operating mode you attach the data logger directly to the serial interface of the PC. In this case only instantaneous values are processed. On the basis of the instantaneous values the further processing takes place in EDA-2000. If only ...

  • Model 703+ - Personal Noise Dosimeters

    Spark - The Spark series are the perfect choice for personal noise exposure sampling in the workplace. Weighing only 7 ounces, they are intrinsically safe data logging dosimeters.

    By Larson Davis, a division of PCB Piezotronics Office in Bangkok, THAILAND. from Dosimeters Product line

  • CR211 Datalogger with 922 MHz Spread Spectrum Radio

    The CR210 Datalogger has the same functionality of the CR200 Datalogger, but includes an on-board 922 MHz spread spectrum radio. The CR210's input channel configuration and small size is optimal for measuring one or two sensors. When paired with an ENC200 enclosure and the small 16869 battery, the packaged CR210 has a deployment size of only 6 ...

    By Campbell Scientific, Inc. Office in Bangkok, THAILAND. from Dataloggers Product line

  • Model CR5000 - Measurement & Control System

    The CR5000 is a rugged, high performance, integrated data acquisition system with a built-in keyboard, graphics display, and PCMCIA card slot. It combines 16-bit resolution with a maximum throughput of 5000 measurements per second. The CR5000 is available with a built-in sealed rechargeable battery base or in a low profile version without ...

    By Campbell Scientific, Inc. Office in Bangkok, THAILAND. from Dataloggers Product line

  • COM310 Voice-Synthesized Modem

    The COM310 enables anyone with a telephone to call a datalogger and receive a verbal report of real-time site conditions. The datalogger can be programmed to report specific conditions. A caller then can select specific information by pressing numbers on a touch-tone phone. The COM310 can also be used to retrieve data from the datalogger. Data ...

    By Campbell Scientific, Inc. Office in Bangkok, THAILAND. from Communications Product line

  • Model CR800-Series - Measurement and Control System

    The CR850 is a smaller, research-grade datalogger that includes an on-board keyboard display as part of its integrated package. It is intended for smaller configurations in which fewer sensors will be measured. Each CR850 reads input from sensors, then transmits the data via a communication peripheral; most sensors and telecommunication devices ...

    By Campbell Scientific, Inc. Office in Bangkok, THAILAND. from Dataloggers Product line

  • SDM-CAN Datalogger to CANbus Interface

    The SDM-CAN interface allows a Campbell Scientific datalogger to sample data directly from a CANbus communications network. CANbus data can be stored (and synchronized) with other data values measured directly by the datalogger, allowing testing and verification of CANbus-based data alongside measurements made independently via the datalogger's ...

    By Campbell Scientific, Inc. Office in Bangkok, THAILAND. from Measurement & Control Product line

  • SW12V Power Switch Assembly

    The SW12V allows a datalogger control port to control the status of an internal switch, thereby controlling whether 12 Vdc power is passed to an external peripheral.

    By Campbell Scientific, Inc. Office in Bangkok, THAILAND. from Measurement & Control Product line

  • LLAC4 4-Channel Low-Level AC Conversion Module

    The LLAC4 is a small peripheral that increases the number of low-level ac signals a datalogger can monitor. The module enables four datalogger control ports to emulate pulse counting channels by converting the low level ac signals to the logic levels read by the control ports. To use the LLAC4, the datalogger control ports must accept high ...

    By Campbell Scientific, Inc. Office in Bangkok, THAILAND. from Measurement & Control Product line

  • SDM-IO16 16-Channel Input/Output Expansion Module

    The SDM-IO16 expands the digital input and/or output capability of Campbell Scientific dataloggers. It offers similar functionality to the control ports of our CR10X and CR23X dataloggers. When configured as an input, each port can monitor logic state, count pulses, measure signal frequency, and determine duty cycle. The SDM-IO16 can also be ...

    By Campbell Scientific, Inc. Office in Bangkok, THAILAND. from Measurement & Control Product line

  • SDM-CD16AC 16-Channel ac/dc Relay Controller

    The SDM-CD16AC is a synchronous device equipped with relay control ports that control power to each of 16 external ac or dc devices. Each relay port can be controlled automatically by the datalogger's program or controlled manually with an override toggle switch. When under datalogger control, the state of the relay is controlled by the SDM ...

    By Campbell Scientific, Inc. Office in Bangkok, THAILAND. from Measurement & Control Product line

  • SDS122 Two-Way Serial Data Switch

    The SDS122 is a configurable, two-way serial data switch that allows two modem devices to be connected to a datalogger at the same time. The SDS122 connects the datalogger to whichever modem intiates communications allowing both remote and local interrogation of the datalogger to be carried out. The SDS122 supports both DTE and DCE devices without ...

    By Campbell Scientific, Inc. Office in Bangkok, THAILAND. from Communications Product line

  • SC929 9-Pin-to-9-Pin RS-232 Cable

    The SC929 converts the CMOS logic levels of our dataloggers to the RS-232 logic levels of a battery-operated laptop. The SC929 is a simple 9-pin to 9-pin interface designed for 'walk up' connection to a datalogger. It does not provide opto-isolation, so it should only be used with laptop computers running from internal batteries (not connected to ...

    By Campbell Scientific, Inc. Office in Bangkok, THAILAND. from Communications Product line

  • SC100 1-Channel Serial Data Interface

    The SC100 can work in a datalogger to sensor mode, or datalogger to computer mode. When used between a datalogger and a computer, the SC100 allows a CR10, CR10X, 21X, or CR23X to send Burst data to a computer. The SC100 typically receives Burst data from the datalogger at 78.6 kbaud, buffers it, then retransmits to the computer at 38.4 kbaud.

    By Campbell Scientific, Inc. Office in Bangkok, THAILAND. from Communications Product line

  • CS410-L Shaft Encoder

    The CS410 is a shaft encoder designed for water level measurements. A pulley attached to a a float and counter-weight rotates as water level rises or falls, and the shaft encoder sends two pulse strings to the datalogger. The datalogger records the pulse strings, and the water level is calculated by adding and subtacting the clockwise or counter ...

    By Campbell Scientific, Inc. Office in Bangkok, THAILAND. from Sensors Product line

  • RF310M RF Modem for Midland Radios

    The RF310M Modem provides the communication interface between one of our dataloggers and a Maxon/Midland radio. The modem is typically powered by the 5 V power supply from the datalogger's serial I/O port. When the modem is at a non-datalogger repeater site, it is powered by a PS100/A100 combination. Each RF310M contains dip switches that allow ...

    By Campbell Scientific, Inc. Office in Bangkok, THAILAND. from Communications Product line

  • Raven110 GPRS/EDGE Cellular Digital Modem

    The Raven110 is a an Airlink product intended for Cingular digital cellular networks. This full-duplex modem transmits data to the local cellular tower using either an GPRS (General Packet Radio Service) or EDGE (Enhanced Data rates for GSM Evolution) network. The Raven110 uses the Internet to access the datalogger, eliminating dialing delays.

    By Campbell Scientific, Inc. Office in Bangkok, THAILAND. from Communications Product line

  • 05103-L R. M. Young Wind Monitor

    The wind monitors are lightweight instruments that measure wind speed and wind direction. Manufactured by R. M. Young, the wind monitors are cabled for use with our dataloggers. The wind monitors' design emphasizes simplicity and lightweight construction.

    By Campbell Scientific, Inc. Office in Bangkok, THAILAND. from Sensors Product line

  • 109-L Temperature Probe for CR200-series Dataloggers

    The 109-L Temperature Probe is a thermistor used with our CR200-series dataloggers. The CR200-series dataloggers have a special instruction for measuring the 109 probe. The 109 is designed to measure the temperature of air, water, or soil. For air temperature measurements, the 41303-5A solar radiation shield is typically used to house the probe, ...

    By Campbell Scientific, Inc. Office in Bangkok, THAILAND. from Sensors Product line

  • CR295X - Model CR295X - Datalogger for Use With Satellite

    The CR295X is a small, low-cost datalogger that reads input from one or two sensors, then transmits the data using the GOES satellite transmitter. Multiple CR295Xs can be configured as a network, or units can be deployed individually. CRBasic, its full programming language, supports simple or complex programming and many onboard data reduction ...

    By Campbell Scientific, Inc. Office in Bangkok, THAILAND. from Dataloggers and Data Acquisition Systems Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you