Direct Push Drilling Services For Monitoring And Testing Available In Pennsylvania
-
PremiumManufactured by Vista Clara, Incbased in USA
Our staff of Professionally Licensed Geologists and PhD Geophysicists are OSHA HAZWOPER and MSHA Certified to provide integrated field services for various industries and applications. Our integrated field services span project design, equipment preparation and mobilization, field data collection, data analysis, and final reporting—all responsive to your ...
-
Foundations are the fundamental base of everything we build. Whether you’re designing and building a landfill, a roadway, a house, or a skyscraper, the integrity, strength and stability of the foundation is a critical factor. From subsurface investigation to laboratory testing and engineering design – CATLIN can provide comprehensive geotechnical engineering ...
-
based in USA
COLUMBIA Technologies has applied our deep experience in governmental compliance, security, safety and documentation to dozens of remediation assessment projects for federal civilian and military agencies at sites all across the U.S. As a Veteran-Owned Small Business, we have built COLUMBIA Technologies to be a responsive, reliable and high-value partner to the federal government. We bring to ...
-
based in USA
Conventional Field Methods: 3TM Consulting, LLC has extensive experience in subsurface site characterization and the remediation of contaminated soil and groundwater. We have used manual samplers, conventional drilling rigs, and direct push technology (such as Cone Penetrometer Testing and Geoprobe) to sample soils and groundwater. The photograph to the right shows direct push technology being ...
-
based in USA
Direct-Push, auger, drop hammer, air hammer technologies, allowing for: Soil Sampling, monitoring well installation, well abandonment, temp well installation, geotechnical ...
-
Manufactured by Cascade Drillingbased in USA
Cascade Drilling specializes in Sonic drilling. Sonic is particularly applicable to environmental projects intended to determine the existence or absence of subsurface contamination and to facilitate remediation efforts if needed. Our highly-trained drill crews place a strong emphasis on safety, project management, and quality control. We operate in urban areas, in rough terrain, in open fields ...
-
based in USA
In most environmentally impacted sites, HCR recommends and utilizes cutting edge drilling technologies acceptable to regulatory agencies for deploying the appropriate technical environmental application for significant improvements in site characterization and ...
-
based in USA
OTIE has supported the USEPA Brownfields Program through targeted brownfields assessments (TBAs), general technical program support, meetings, financial program support, petroleum sites and rural/small communities, and prevention. We provide services nationwide through various ...
-
based in USA
ISCO-EFR is EcoVac’s proprietary technology combining multi phase / dual phase extraction (MPE/DPE) with in situ chemical oxidation (ISCO). This unique approach has decreased contaminant levels relative to corrective action levels by 80 to 100% in nearly all applications. This process targets sites with dissolved groundwater contamination from chlorinated or non-chlorinated organic ...
-
based in USA
As a state certified provider of drilling services in Oregon, First Strike Environmental has a well-earned reputation for excellence in providing timely and efficient geotechnical drilling services, direct push (Geoprobe) technology services, and backhoe test pit excavating. Our drilling staff is licensed by the Oregon Water Resources Department (WRD) as monitoring well constructors. All on-site ...
-
based in USA
Service include waste removal and disposal and in-situ remediation of waste ...
-
based in USA
Our experienced operators have provided the very best direct-push, environmental and geotechnical drilling services since 1995. As of the Fall of 2019, our fleet consists of a total of eight rigs including four track-mounted Geoprobe® Rigs (Models 8150LS, 3230DT, 7822DT and 7720DT), two track-mounted CME 45 rigs and two track-mounted Diedrich rigs (D-50 & D-25D). ...
-
based in USA
Environmental Products & Services of Vermont, Inc. (EPS) has extensive experience performing subsurface investigations and constructing remediation systems designed to meet site specific requirements. The EPS track-mounted direct push rig can be used to access difficult drilling locations and is a cost-effective method for collecting soil, soil gas, and groundwater samples. EPS uses a ...
-
based in USA
We provide environmental field sampling services and support services to a wide array of commercial and consulting clients. We have extensive experience in all types of environmental sampling including: soil sampling, low flow and traditional groundwater sampling, sub-slab soil gas sampling and ambient air sampling. We also have extensive experience in oversight servivces during the ...
-
Manufactured by Cascade Drillingbased in USA
Cascade Drilling's fleet of Geoprobe equipment includes rigs as small as a 420M and 54LT up to the full sized 8040DT. These systems can be used to perform subsurface soil, water or vapor surveys. They are capable of obtaining soil and groundwater samples, installing standard monitoring wells, pre-packed monitoring wells and have geotechnical capabilities when equipped with 140# hammer. They can ...
-
based in USA
ORIN’s chemical remediation approaches apply in situ and ex situ processes that cost-effectively reduce contaminants to site or regulatory levels or nonhazardous to meet the Toxicity Characteristic Leaching Procedure (TCLP) requirements and Universal Treatment Standards (UTS). These chemical processes include chemical oxidation, bioremediation, metal stabilization, and reductive ...
-
Distributed by S2C2 Inc.based in USA
S2C2 is an environmental services firm that focuses on providing High Resolution Site Characterization. S2C2 is a unique environmental services company, as we have evolved from and continue to provide mobile laboratory services in addition to Direct-Sensing and Direct-Push services. S2C2 has extensive experience using a variety of direct-sensing technologies, including: Electrical Conductivity ...
-
Distributed by S2C2 Inc.based in USA
Environmental field investigation techniques have advanced greatly in the last few years, and at the forefront of these techniques is the Direct-Push unit. S2C2 only uses genuine Geoprobe® direct-push units and tooling for our investigations. A Direct-Push Unit, with an experienced operator, is capable of significantly reducing sampling time, which cuts clients costs proportionally. The ...
-
based in USA
Gregg Drilling & Testing, Inc. offers a wide range of environmental and drilling, cone penetration testing (CPT), and direct push sampling services for site investigation and remediation. Gregg also provides well development and sampling services and has numerous modules for contaminant screening such as UVOST laser induced fluorescence. On or off-shore, our experienced personnel and ...
-
based in USA
August Mack has the equipment and expertise to provide soil, water, air, and waste sampling services throughout the United States. Our staff has experience sampling soil and groundwater at the following types of sites: leaking underground storage tank (LUST); Resource Conservation and Recovery Act (RCRA); Comprehensive Environmental Response, Compensation and Liability Act (CERCLA); and Toxic ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you