Only show results in Michigan? Ok

displacement monitoring (Displacement Monitoring) equipment

  • Flexible Rod Extensometer

    A low cost, convenient instrument for the monitoring of ground displacements. Designed to withstand severe field conditions and accommodate transverse shear. The unit is supplied completely assembled and sealed for grouting into the borehole. Rod displacement readings may be taken manually using a dial gauge or monitored continuously with a remote ...

    By RST Instruments Ltd. based in Maple Ridge, BRITISH COLUMBIA (CANADA). from Flexible Rod Extensometer Product line

  • Pizzi - Wire Displacement Sensor

    The wire deformometer is usually used to monitor and measure movements in landslides by measuring two points distant from each other. The instrument is made from the protected sensor in a sturdy aluminum box, by a non-deformable wire constantly kept in tense by a tensioning device and a fixing device to fix the other end of the wire to the ...

    By Pizzi Instruments S.r.l. based in Firenze, ITALY. from Wire Displacement Sensor Product line

  • LoadTrac - Model II - Load Frame Machine

    LoadTrac-II is a versatile and intelligent system composed of a load frame and a computer with monitor. The load frame houses a high speed, precision micro stepper motor that moves the load platen and thereby applies a vertical load to the soil specimen. An embedded control board with a dedicated CPU uses readings from the force and displacement ...

    By Geocomp Corporation based in Acton, MASSACHUSETTS (USA). from Load Frame Machine Product line

  • PCH - Model 1072 - Simple Industrial Monitor

    The PCH 1072 is the new generation of high quality low cost vibration monitors, which can be used in many rotating machine applications. The standard Version is a 1 channels monitor with a frequency range from 0,5Hz to 1kHz. It offers user selectable filters and selection between acceleration, velocity or displacement.

    By PCH Engineering A/S based in Hoersholm, DENMARK. from Simple Industrial Monitor Product line

  • Autonomous Monitoring, Analysis and Reporting System

    K-Observer is a fully autonomous monitoring, analysis and reporting system supporting the integration of various sensors (including third party sensors) for continuous and long-term subsea monitoring. It is designed for applications such as scour monitoring, structural monitoring, structural deformation, marine growth and corrosion, displacement ...

    By Kongsberg Maritime AS based in Kongsberg, NORWAY. from Autonomous Monitoring, Analysis and Reporting System Product line

  • Monitran - Model MTN/VM110 - Handheld Vibration Meter

    Hand-held Vibration Monitor, peak and RMS acceleration, velocity and displacement outputs.

    By Monitran Ltd based in Penn, UNITED KINGDOM. from Handheld Vibration Meter Product line

  • 625

    Used extensively to protect displacement water meters and other sensitive fluid monitoring devices.

    By Mueller Steam Specialty based in St. Pauls, NORTH CAROLINA (USA).

  • 625B

    Used extensively to protect displacement water meters and other sensitive fluid monitoring devices.

    By Mueller Steam Specialty based in St. Pauls, NORTH CAROLINA (USA).

  • IBIS - Model FL - 2D Monitoring Interferometric Radar for Movements and Displacements

    The IBIS-FL interferometric radar is a highly innovative technology for 2D monitoring of displacements and movements in slopes and structures. Required to prevent or forecast natural disasters that could affect human lives, monitoring of terrain movements (e.g., unstable slopes, landslides, glaciers) is an increasingly important task for ...

  • Arjay - Model 2882-OWS - Oil Water Separator & Sump Alarm

    Reliable monitoring for the oil/water interface in separators. The probe is inserted into the separator or sump to the depth of desired oil accumulation. The electronics is calibrated to the capacitance field around the probe. As oil accumulates and displaces the water, the capacitance change around the probe tip is monitored to activate the ...

    By Arjay Engineering Ltd. based in Oakville, ONTARIO (CANADA). from Oil Water Separator & Sump Alarm Product line

  • Proximity Probes

    CHB 3011 / CHB 3013 Proximity Probes - or displacement transduceres - are used to monitor the movement, i.e. the vibration of a machine. The probes are suitable for a variety of different applications like shaft location of sleeve bearing machines, monitoring of thrust bearing wear, vibration measurements, thermal expansion and etc. The probes are ...

    By PCH Engineering A/S based in Hoersholm, DENMARK. from Proximity Probes Product line

  • HOBO Pendant - Model UA-004-64 - G Data Logger

    Measure 3-dimensional motion, such as sports activity or medical therapy compliance with the HOBO® Pendant G data logger. With this logger, users can measure acceleration and angular displacement in 1, 2 or 3 axes. Use this data to monitor activity and improve performance.

    By Onset Computer Corporation based in Bourne, MASSACHUSETTS (USA).

  • Model FLP series - Pneumatic Drive Low Pulsation Bellows Pumps

    The position of the bellows is constantly monitored via the laser displacement sensors and proximity switches. The pump itself reduces pulsation without any additional equipment because the controller determines the appropriate amount of phase shift required to move the bellows left and right via an electromagnetic valve.pressure up to 8.00kPa.

    By Iwaki Pumps based in Saitama, JAPAN. from Pneumatic Drive Low Pulsation Bellows Pumps Product line

  • EPG - Tank Full Level Sensor

    EPG’s tank full sensor is a level displacement sensor (float) that is used to monitor a tank liquid level. The sensor is normally closed (N.C.) and includes 25' of SJ cord and a weathertight junction box with two inch male pipe threads (2' MNPT) as standard. The tank full sensor is commonly used to monitor the liquid level in a water or ...

    By EPG Companies Inc. based in Maple Grove, MINNESOTA (USA). from Tank Full Level Sensor Product line

  • Pizzi - Optical Coordinometer

    The optical coordinometer is used for measuring the position of the wire of straight or inverted pendulums, providing the two cartesian coordinates of the horizontal plane and ensuring highly accurate measurements with very high resolution. Together with EGS coordinometer, the optical coordinometer is one of the manual instruments produced by ...

    By Pizzi Instruments S.r.l. based in Firenze, ITALY. from Optical Coordinometer Product line

  • Hydrostatic Leak Test System

    CTS Hydrostatic Leak Test Systems are custom test solutions engineered to test parts to ensure they conform to manufacturer leak specifications and sized to meet production requirements. Hydrostatic leak testing is a method of testing a part vessel or cavity for leaks, structural strength, and pressure tightness.  It is an internal cavity ...

    By Cincinnati Test Systems (CTS) based in Harrison, OHIO (USA). from Hydrostatic Leak Test System Product line

  • RADeCO - Model AVS-28A - Continous Duty Samplers

    The Model AVS-28A Portable Constant Flow Air Sampler is a continuous duty, constant flow device. It can be used with filters and cartridges in the collection of airborne contaminates, or as a regulated, positive displacement vacuum supply for continuous air monitors and stack sampling systems.The ability of the AVS-28A to maintain a preset sample ...

    By RADeCO, Inc . based in Plainfield, CONNECTICUT (USA). from Continous Duty Samplers Product line

  • RADeCO - Model AVS-60A - Continous Duty Samplers

    The Model AVS-60A Portable Air Sampler is a versatile, medium weight, continuous duty, constant flow device. It can be used with filters and cartridges in the collection of airborne contaminates, or as a regulated, positive displacement vacuum supply for continuous air monitors and stack sampling systems. This unit is perfect for jobs requiring 1 ...

    By RADeCO, Inc . based in Plainfield, CONNECTICUT (USA). from Continous Duty Samplers Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you