Distributed Sensing Equipment For Monitoring And Testing Near Kiribati
-
Manufactured by DEWESoftbased in SLOVENIA
Very robust DAQ systems with IP67 degree of protection, operating temperature between -40°C up to +85°C and high shock protection provide a very reliable solution for testing in the extremely harsh ...
-
based in USA
Spontaneous combustion has long been recognized as a fire hazard in coal storage facilities such as coal silos and sheds. These accidents usually begin as “hot spots” generated by oxidation and the poor release of heat deep in the coal silo, eventually resulting in widespread fires. Therefore, it is imperative to monitor “hot spots” within coal silos. Since coal silos are ...
-
Manufactured by BEI Sensorsbased in USA
This versatile interface between a sensor and any receiving electronics provide an electrically robust output to the receiving electronics. This presents a solid solution for systems with poor signal compatibility, noise and/or grounding ...
-
Manufactured by Paulsson, Inc. (PI)based in USA
EDAS are acoustic sensors in a single fiber. They are created by enhancing the coherent Raleigh backscattering in the fiber and can be manufactured in long arrays of many thousands of sensors. It allows for fiber optic sensing of acoustic waves at a broad range of frequencies that travel through the surrounding ...
-
Manufactured by Paulsson, Inc. (PI)based in USA
With DSS, Paulsson's clients get the right data to determine the best insights. This innovation addresses extreme sensitivity and capability. It measures 10,000s changes in both temperature and strain along the length of an optical ...
-
Manufactured by Paulsson, Inc. (PI)based in USA
Clear insights are derived from the enhanced visualization of temperature data using DTS, which monitors temperature over long distances or across large surfaces. This technology is used for underground and ocean floor power ...
-
Manufactured by SensorWare Systems, Inc.based in USA
Efficient farming means efficient water use: putting water only where youneed it and only when you need it. SensorWare Systems’ unique technology,the Sensor Web, makes this as easy as ...
-
Manufactured by OleumTech Corporationbased in USA
Wirelessly gather/distribute sensor data, Map I/O anywhere within the network, Modbus Master/Slave functionality, Supports local Over-the-Air (OTA) functionality for updating OleumTech wireless devices (OTA Link Adapter required, 900 MHz only), 1 configurable Serial/RTU port (RS232/RS485), 1 dedicated RS485 port (RJ-45), 4 analog inputs (0-5 Vdc), 2 discrete inputs, 2 discrete outputs, -40 °C ...
-
Manufactured by OleumTech Corporationbased in USA
Wirelessly gather/distribute sensor data, Map I/O anywhere within the network, Modbus Master/Slave functionality, Supports local Over-the-Air (OTA) functionality for updating OleumTech wireless devices (OTA Link Adapter required, 900 MHz only), 1 configurable Serial/RTU port (RS232/RS485), -40 °C to 80 °C (-40 °F to 176 °F), 900 MHz / 915 MHz / 2.4 GHz / 868 MHz, Secure AES ...
-
Manufactured by Intec Controlsbased in USA
Highly configurable controller for up to 96 sensors distributed on a robust RS-485 bus. Programmed with user-friendly PC software or via front panel pushbuttons, the DGC6 can be used for single- or multi-zone applications with on-off or variable speed fan ...
-
Manufactured by Transducer Techniques, LLCbased in USA
The SLB Series Subminiature load cells (Load Buttons) are offered for compression only applications where space is limited. The matching surface must be flat for ultimate accuracy. The loading diameter is slightly convex for accurate load distribution. These sensors are manufactured from heat treated i7-4ph stainless steel, and the sensing element incorporates bonded foil strain gages of the ...
-
Manufactured by Dynamax Incbased in USA
The new SapIP wireless data logging system from Dynamax, Inc., with EXO or Dynagage sap flow sensors, can be used to measure plant water use in “real-time” with no calibration. The SapIP gateway can monitor up to (25) SapIP nodes with (2) sap flow sensors each. The nodes can be located up to 5,000 feet away from the gateway module. Data is collected and analyzed through the Dynamax ...
-
Manufactured by Bandweaverbased in UNITED KINGDOM
FireLaser is a Linear Heat Detector System specifically designed for use in Special Hazard fire detection applications. The FireLaser Distributed Temperature Sensing (DTS) system connects to a distributed fiber optic cable (FireFiber) and determines temperature and distance data at thousands of points along the length of the cable. The fiber optic cable is installed within the asset to be ...
-
Manufactured by Bandweaverbased in UNITED KINGDOM
Bandweaver’s RTTR is a key component of a utility operator’s intelligent condition monitoring systems. This system helps you to reduce risk, to implement smart maintenance programs and to increase the efficiency of your load management system. Based on the thermal analysis defined by IEC-60287 and IEC-60853 and combined with Distributed Temperature Sensors (DTS) and Distributed ...
-
Manufactured by Bandweaverbased in UNITED KINGDOM
Distributed temperature sensing systems (DTS) are fiber optic based optoelectronic instruments which measure temperature along the length of the fiber optic sensing cable. The unique feature of a distributed temperature sensing system is that it provides a continuous (or distributed) temperature profile along the length of the sensing cable and not at discrete sensing points which must be ...
-
Manufactured by Bandweaverbased in UNITED KINGDOM
The Bandweaver Horizon technology is a sophisticated Distributed Acoustic Sensing (DAS) technology which forms a key part of a perimeter monitoring and intrusion detection ...
-
Manufactured by Bandweaverbased in UNITED KINGDOM
For medium to long range (5-30km) industrial monitoring applications where reliability, safety and seamless system integration are essential, the compact, low-power, user friendly T-Laser Distributed Temperature Sensor (DTS) is the ideal solution. The T-Laser DTS has been designed with safety in mind and has been tested to the industry’s most rigorous ...
-
Manufactured by Bandweaverbased in UNITED KINGDOM
The FenceSentry series of Distributed Acoustic Sensors (DAS) are optimised for Perimeter Intrusion Detection (PIDS) and provides detection and locating of intrusion events with minimal nuisance events and false ...
-
Manufactured by Valeport Ltd.based in UNITED KINGDOM
The MIDAS CTD (previously known as the Model 606) is Valeport's premier CTD Profiler. High accuracy sensors (including ±0.01% pressure) and robust titanium design allow reliable operation to 6000m depth, under the harshest conditions. It also features truly synchronised sampling to ensure that all sensors are sampled at exactly the same point during a profile. Primarily for use as a self ...
-
Manufactured by Valeport Ltd.based in UNITED KINGDOM
The MIDAS SVX2 is the latest version of Valeport's unique instrument. Recognising the conflict faced by users requiring the superior Sound Velocity data from an SVP, but still needing the Salinity and Density data from a CTD, the MIDAS SVX2 combines both technologies to give the best of both worlds. Now fitted with a 0.01% pressure sensor as standard, the SVX2 also uses synchronised sampling to ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you