Dust Monitoring Equipment available in Somalia

Available in Somalia| Near Somalia
260 Results found

We couldn't find any results in Somalia

Here is a list of results available in Somalia

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Monitoring & Testing ×

  • Subcategory: Dust Monitoring ×

  • Available in: Africa ×

  • Available in: Somalia ×

CONOSTAN - Lubricant Condition Monitoring Standards

by SCP SCIENCE     based in Baie D`Urfe (Montreal), QUEBEC (CANADA)

In 1999, a new calibration procedure (ISO 11171) for automatic particle counters was introduced, rendering previous procedures (i.e. ISO 4402)obsolete. With the new, recently updated (2010) procedure, secondary calibration requires a fluid tracable to NIST SRM 2806 - a suspension of 3.3 mg/L of ISO medium test dust in super-clean hydraulic ...

QuantiMass - Mass Flow Measurement System

by Monitor Technologies LLC     based in Elburn, ILLINOIS (USA)

The QuantiMass Mass Flow Measurement Sensor / Meter is designed with the latest microwave technology and is used to continuously quantify the flow of powders & solids being conveyed in metallic pipes. The QuantiMass is based on technology that has been developed and proven by Muetec Instruments over several years. The measurement process of ...

LightHawk - Model 560 Series - Compliance Opacity / Dust Monitor

by Teledyne Monitor Labs, Inc.     based in Englewood, COLORADO (USA)

Teledyne Monitor Labs LightHawk Opacity/Dust Monitor offers advanced technology for outstanding performance and reliability as an opacity, optical density or dust concentration monitor.

RACI - Dust monitoring Systems

by RACI d.o.o.     based in Ljubljana, SLOVENIA

Beside performing gravimetrical dust measurements,RACI company is also able to offer its customers contemporary, proven and robust dust monitoringsystems for continuous or discontinuous monitoring with competent and compliance solutions, low costs of ownership, high reliabi

Zefon - Inhalable Dust Sampler

by Zefon International, Inc.     based in Ocala, FLORIDA (USA)

The Zefon Inhalable Dust sampler is a reusable filter cassette with a sampling head designed to measure the worker's exposure to inhalable particulates and respirable dust. When sampling at the recommended flow rate of 2 LPM, it collects a particle size distribution that includes particles of 100 micron and smaller. This meets the definition set ...

Model FDS 15 - Fine Dust Sensor

by Dr. Födisch Umweltmesstechnik AG     based in Markranstädt, GERMANY

The fine dust sensor FDS 15 is an optical sensor for continuous measurement and control of fine dust contents. An integrated dust precipitator can be used optionally for the analysis of respirable particle fractions  (PM2,5).  The determination of the dust content in the FDS 15 is based on the method of scattered light measurement. The ...

Dust / Dust Sampling System

by CleanAir Europe     based in La Penne-sur-Huveaune, FRANCE

This manual system can continuously sample dust from a gas duct under isokinetic conditions. This means that a representative sample of the flow in the chimney can be obtained at the sampling point. Particles are collected on heated filtration media.

ALOATEC - Model PM10 - Fine Dust Measurement

by ALOATEC     based in Calais, FRANCE

Monitoring network: Continuous measurement of fine dust emissions in µg/m3. Environmental studies - Health studies: Fine dust measurements, weather conditions, chemical analysis ... to conduct environmental and health studies. Chemical analysis: Chemical analysis of the filters of sensors (including heavy metals concentrations). Pareto of ...

VisGuard - Visibility Monitor

by Sigrist-Photometer AG     based in Ennetbürgen, SWITZERLAND

The VisGuard measures the scattered light intensity of a sample drawn into the instrument. Filtered purge air is fed through the flow cell, thus enveloping the sample in a protective shroud of clean air. This effectively keeps the optics clean. Installations are either in the tunnel cavity/niches (in-situ) respectively using extractive sampling ...

Ecotech - Model MegaVol 3000 - Dust Sampler

by Ecotech Pty Ltd     based in Knoxfield, AUSTRALIA

The MegaVol 3000 particulate sampler performs remote unattended sampling of particulates and is ideal for heavy metal and radiation exposure monitoring.

MonoGard - Tribo Electric Quantitative Dust Monitor

by Codel International Ltd     based in Bakewell, UNITED KINGDOM

The advanced electronics of the SiteGard detect the signal and present it to the operator using a modulating LED at the local sensor and an LCD display on the MonoGard processor. SiteGard / MonoGard is a quantitative particulate monitor which can be used either as a dust emission monitor or as a simple broken bag detector. The MonoGard signal ...

Land - Model 4200 - Non-Compliance Dust Emissions Monitor

by AMETEK Land     based in Dronfield, UNITED KINGDOM

The Model 4200 is a compact smoke, dust and particulate monitor for measuring dust emission concentrations on industrial processes and non-compliance applications. This dust monitor is ideally suited to multiprocess plants with common exhaust stacks.

EnergyTech - Model 301 - Tribo Electric Dust Monitor

by Codel International Ltd     based in Bakewell, UNITED KINGDOM

The EnergyTech 301 is a low cost dust monitor using well-proven tribo-electric technology providing accurate and rapid results. The EnergyTech 301 requires no critical alignment and has no optical surfaces to keep clean. The sensor is easy to install, requiring only a simple probe and is ideal for small duct sizes. Minimal maintenance is required, ...

Fidas - Model 200 / 200 S - Fine Dust Monitor and Immission Measurement System

by Palas GmbH     based in Karlsruhe, GERMANY

The Fidas 200 is a fine dust monitoring and ambient air measurement system for ambient air monitoring of fine dust for regulatory purposes. This version is designed for indoor installation at temperature-controlled sites and is typically incorporated in measurement cabinets or stations.

Microdust - Model Pro - Remote Noise Monitoring System / Remote Dust Emissions Monitoring System

by Casella     based in Kempston, UNITED KINGDOM

Microdust Pro is a rugged, hand-held, data logging instrument for the real-time detection of airborne dusts, fumes and aerosols. A quick, easy to use instrument, giving the user additional qualitative data which cannot be gained by gravimetric air sampling methods alone. This extremely versatile instrument can also be used with a range of ...

Fidas - Model 100 - Real-Time Dust Monitor For Indoor Air Quality Measurements

by Palas GmbH     based in Karlsruhe, GERMANY

The Fidas 100 is specifically designed for long-term workplace exposure assessments and indoor air quality measurements.

Model DCEM 2100 - Dual Pass Opacity / Dust Monitor

by Codel International Ltd     based in Bakewell, UNITED KINGDOM

The DCEM2100 provides a continuous measurement of opacity or dust concentration in flue gases by continuously measuring the transmissivity of visible light across a process duct or stack. Its dual-pass optical arrangement is based on twin transmissometers measuring in opposing directions through the same section of the gas stream, providing not ...

Model GA-5000NAO - NH3 Ammonia Slip Integration Online Monitoring System

by HANGZHOU ZETIAN TECHNOLOGY CO., LTD     based in Hangzhou, CHINA

GA-5000NAO (NH3、NO、O2) is based on a tunable semiconductor laser absorption spectroscopy (TDLAS) and ultraviolet difference absorption spectroscopy (DOAS) technology principle, including three parts: pretreatment, gas analysis module and data processing and display. After dusting by sampling probe, sampling by heating pipe, the measured gas is ...

DynOptic - Model DSL-340 MkIII - Double Pass Dust Monitor For Monitoring Dust Emissions Using DDP

by DynOptic Systems Ltd     based in Brackley, UNITED KINGDOM

The DSL-340 Dust Monitor is an optical instrument designed to measure the concentration of dust or particulate matter in exhaust gas passing through a duct, stack or flue. The DSL-340 uses the innovative Dynamic Detection Principle (DDP) which measures fluctuations in the intensity of a light beam, using a folded beam Transceiver/Reflector ...

Model SPX50 - Dust Sensor

by Sefram     based in Templemars, FRANCE

The SPX 50 is a sensor, which is based on the tribo-electricity principle. It can be used for dust rejection detection and monitoring.

Need help finding the right suppliers?

Let the XPRTs do the work for you