Dust Monitoring Equipment For Monitoring And Testing In Kazakhstan
-
PremiumManufactured by ERGAbased in TURKEY
Air separators (pneumatic separators) are used for dedusting and dry separation of materials into light and heavy fractions by size, density and ...
-
Manufactured by Sintrol Oybased in FINLAND
The S305QAL stack emissions dust monitor meets the highest European standards as defined in EN14181. The S305QAL is approved for and is suitable for use on waste incineration and all combustion plant applications. The S305QAL1 comes with many key features making it a very reliable, low maintenance, sensitive and robust solution for stack measurements. Certified measuring ranges: 0…7.5 ...
-
Manufactured by Sintrol Oybased in FINLAND
TÜV certified to meet the EN 14181 (2004) standard, the S305 dust monitor is used for official emissions applications. The state of the art dust monitor has been used in stack emissions for a number of state owned and private industrial applications around the ...
-
Manufactured by Sintrol Oybased in FINLAND
The S101 is a basic cost-effective dust monitor to give indication of changes in dust levels from gas flow. This robust and sensitive monitor can be used in duct sizes with a diameter of less than 1 meter. The S101 is a real-time continuous dust monitor and will monitor for leaking or broken filters. The key features of the S101 are onboard red/yellow/green light to indicate dust levels, 2 solid ...
-
Manufactured by Sintrol Oybased in FINLAND
The Wireless Router is a microprocessor-based unit, equipped with USB, RS485 and Sintrol’s local RF-link connections. The device is designed to manage all Sintrol products connected to Sintrol Network. The Wireless Router has been specifically designed for easy installation and reliable ...
-
Manufactured by Sintrol Oybased in FINLAND
Trend monitor with 4-20 mA output for continuous dust measurement. Continuous trend monitor that gives plant operators to see the performance of the filtration systems and ducts over a period of time. Perfect for installation after any filtration system or in common line channels leading into the emissions points of a ...
-
Manufactured by Sintrol Oybased in FINLAND
As the only probe based dust monitor proven to be a reliable trend monitor after electrostatic precipitators (ESP), the Sintrol ESPY is one of its kind. With the ability to neutralize the electrostatic field in the outlet duct of an ESP, the ESPY is able to give a trend of relative dust concentrations to help plant operators optimize the use of the ...
-
Manufactured by Sintrol Oybased in FINLAND
Continuous dust monitor for trend monitoring in ambient air environments. With increasing demands for workplace health the ability to measure changes in ambient air dust concentration becomes more important by the day. All areas where dust might cause harm to employees or sensitive devices can now be monitored and dust extraction systems operated ...
-
Manufactured by Sintrol Oybased in FINLAND
Snifter A1+ is a low-cost easy to use filter leak detector. This filter leak detector is a direct replacement for the Snifter A1 device. Snifter A1+ can be used for monitoring outlets in a baghouse enabling fast identification of leaking compartments. Commissioning of the device is easy with the convenient auto setup function which identifies normal dust concentration within ten minutes of ...
-
Manufactured by Krohne Messtechnik GmbHbased in GERMANY
The OPTIBAR PT 2000 is an averaging pitot tube for applications with clean liquids, gases and steam. It is ideally suited for DP flow measurements requiring low pressure drop or cost-effective flow metering in extremely large pipes (up to DN20000 / 800"). Unlike conventional single-point pitot tubes that have the limitation of being a point-velocity device, the OPTIBAR PT 2000 averaging pitot ...
-
Manufactured by Sintrol Oybased in FINLAND
New and Improved continuous ambient air dust monitor for industrial ...
-
Manufactured by Dr. Födisch Umweltmesstechnik AGbased in GERMANY
Filter monitor for in-situ dust measurement. with separate operating unit. display showing the measured value in mg/m³ or line ...
-
Manufactured by Dr. Födisch Umweltmesstechnik AGbased in GERMANY
The fine dust sensor FDS 15 is an optical sensor for continuous measurement and control of fine dust contents. An integrated dust precipitator can be used optionally for the analysis of respirable particle fractions (PM2,5). The determination of the dust content in the FDS 15 is based on the method of scattered light measurement. The sucked air is pre-heated to 50 °C. Thereby flow ...
-
Manufactured by Dr. Födisch Umweltmesstechnik AGbased in GERMANY
The filter controller consists of an isolated probe which is installed in the clean gas channel. The complete electronic is integrated in the probe head. No additional control unit is required. The charge transferred by contact and triboelectric processes is derived as current, converted in the evaluation unit, amplified and provided as norm signal 4 ... 20 mA. Via a limit value detector the ...
-
Manufactured by Dr. Födisch Umweltmesstechnik AGbased in GERMANY
Filter monitor for in-situ dust measurement. compact device with display. suitable for the construction of filter monitoring systems. The PFM 13 is a highly sensitive system for continuous, tribo-electric in-situ filter monitoring. Thereby a qualitative monitoring of the exhaust gas is done. Depending on the configuration of the device it can be used as a filter monitoring device as well as a ...
-
Manufactured by Dr. Födisch Umweltmesstechnik AGbased in GERMANY
Filter monitor for in-situ dust measurement compact device display showing the measured value in mg/m³ or in line diagram. The PFM 13 is a highly sensitive system for continuous, tribo-electric in-situ filter monitoring. Thereby a qualitative monitoring of the exhaust gas is done. Depending on the configuration of the device it can be used as a filter monitoring device as well as a dust ...
-
Manufactured by Dr. Födisch Umweltmesstechnik AGbased in GERMANY
For monitoring dust emissions and detecting effectively damages at filtering precipitators . The device is simple in construction and very user-friendly. The integrated micro-controller allows numerous possibilities to use the PFM 02 Ex as well as a timely monitoring of the dust emissions. Target value calibration: Enter a known, averaged dust content in operation state - The PFM 02 Ex ...
-
Manufactured by Dr. Födisch Umweltmesstechnik AGbased in GERMANY
The dust concentration measuring device PFM 02 V is used for the continuous measurement of dust contents, especially for the emission measurement according to TI air, 13th, 17th and 27th BImSchV as well as for the dust concentration measurement in process monitorings. Parallel to the dust measurement flow and temperature of the smoke gas are registered (in combination e.g. with FMD 02). Target ...
-
Manufactured by Dr. Födisch Umweltmesstechnik AGbased in GERMANY
Filter monitor for in-situ dust measurement. compact device. suitable for the construction of filter monitoring systems. The PFM 13 C is a highly sensitive system for continuous, tribo-electric in-situ filter monitoring. Thereby a qualitative monitoring of the exhaust gas is done. Depending on the configuration of the device it can be used as a filter monitoring device as well as a dust measuring ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you