Dust Monitoring Equipment For Monitoring And Testing Near Vanuatu
-
Manufactured by Acoem Australasiabased in AUSTRALIA
The Sintrol S200 series, including the S201 & S203 dust monitors, include a comprehensive range of different process connections and probes. The past 20 years’ experience has been reflected in these new mechanical solutions. Instruments have been engineered and tailored to fit demands and processes based on individual customer ...
-
Manufactured by Acoem Australasiabased in AUSTRALIA
The Sintrol S300 series has a detection limit of 0.01 mg/m3 based on Sintrol’s proven Inductive Electrification Technology, all this while maintaining its recognised robust exterior and reliability. Applications such as filter house monitoring and stack-process are enabled thanks to the extensive features the S300 series provides. Monitoring particulate emissions and filtering performance ...
-
Manufactured by Acoem Australasiabased in AUSTRALIA
The Protinus 1000 provides a particulate monitor ideally suited for continuous monitoring around mines, quarries, construction and other dust generating activities. The Protinus 1000 utilises size specific inlets to ensure accurate real-time dust measurements at suspended solids, PM10 or PM2.5 size fractions. The Protinus 1000 can be combined with weather sensors to provide wind speed and ...
-
Manufactured by Acoem Australasiabased in AUSTRALIA
Sintrol DUMO monitors Total Suspended Particles (TSP) in ambient air based on the signal generated from moving particles. Test measurements in the laboratory and in the field proved that Sintrol DUMO is capable of monitoring low dust concentrations and particle sizes as small as 0.3 micrometers and a monitoring range of 0.1 mg/m3 to over 100mg/m3. Sintrol DUMO is easy to install and commission ...
-
Manufactured by Texcel Pty Ltdbased in AUSTRALIA
The popular EAGLE 2 portable gas detector is a powerful instrument that does more than just offer the standard confined space protection for LEL, O2, H2S and CO. The EAGLE 2 portable gas detector is equipped with features that are not available on competitive ...
-
Manufactured by Baltec Australiabased in AUSTRALIA
The EM919 Emission Monitor provides accurate emission levels monitoring and forms the basis for troubleshooting and fine-tuning of pollution control equipment. Combining bag leak detection and rapper performance monitoring, the EM919 helps reduce average Electrostatic Precipitators (ESP) ...
-
Manufactured by Scarlet Tech Ltd.based in TAIWAN
Scarlet TWL-1S is designed to measure WBGT and thermal work limit (TWL) heat index. The TWL measures air temperature, humidity, radiant heat and wind speed to come up with instructions for work, rest and hydration plan. We integrate the algorithm of TWL and work-rest schedule based on the latest guideline. The user-friendly interface even showed different colors to ensure users in line with TWL ...
-
PremiumManufactured by ENVEAbased in FRANCE
The AirSafe PM provides continuous and precise monitoring of dust exposures in indoor ambient air. The AirSafe PM can be used for indoor workplace exposure monitoring, utilizing the high range and low range sensors to detect and track particulate exposure limits and limit violations. Health and safety personnel can use the measurement data to provide a safe working environment and report site ...
-
PremiumManufactured by ENVEAbased in FRANCE
Radar sensor for measuring the level in silos and containers. Available for silos up to 120 m height. Can be used for a wide variety of materials, regardless of the size or composition of the ...
-
PremiumManufactured by ENVEAbased in FRANCE
Microwave sensor for continuous moisture measurement in dry bulk solids. Sensors for continuous moisture measurement and installation on conveyor belts, screw feeder or hoppers. Two types of sensor-technology to cover a wide range of applications. Both sensors penetrate the product for most reliable measurements. ...
-
PremiumManufactured by ENVEAbased in FRANCE
Stand alone filter dust leak monitor (0-100%) for filter emissions monitoring after baghouses, cartridge filters, cyclones etc. where performance approvals are not ...
-
PremiumManufactured by ENVEAbased in FRANCE
Material flow monitoring with Flow/No Flow information plus additional “Detection of blockage” or “Material flow interruption” function ...
-
PremiumManufactured by ENVEAbased in FRANCE
Controller based filter dust leak monitor (0-100%) for filter emissions monitoring after bag houses, cartridge filters, cyclones ...
-
PremiumManufactured by ENVEAbased in FRANCE
QAL1 approved ProScatterTM particulate CEM for the extractive sampling and measurement of particulate in saturated wet gas streams. Continuous Particulate Monitoring for saturated wet stack applications typically found after wet scrubbers, wet electrostatic precipitators and wet flue gas desulphurisation ...
-
PremiumManufactured by ENVEAbased in FRANCE
QAL1 TÜV approved particulate monitor providing high quality emission measurement for low dust concentrations from dry industrial processes including Baghouses and Cartridge ...
-
PremiumManufactured by ENVEAbased in FRANCE
Continuously monitors particulate flow for signs of filter damage or broken filter bags. Compact and cost effective. The Dusty C has been specially developed to monitor clean sides after filters with high reliability and without time delay for filter breaks. It can be used in metallic ducts in which dust particles will be detected in the gas flow. Its area of application begins at dust levels ...
-
PremiumManufactured by ENVEAbased in FRANCE
LEAK ALERT 73 is a compact sensor for electrodynamic filter damage and leakage monitoring in industrial filter ...
-
PremiumManufactured by ENVEAbased in FRANCE
The PCME DM 210 comprises a single compact sensor design with integrated user interface for reliable and robust particulate monitoring for all types of industrial processes. Additional functionality allows the instrument to measure defined units (mg/m³) with QA checks if required by the Process Operator or ...
-
PremiumManufactured by ENVEAbased in FRANCE
PM10, PM2.5 and PM1 fine dust concentration measurement in the range 0-10,000 μg/m3 using the Standard Reference Method. The MP101M particulate analyzer uses the standard ISO 10473 beta gauge measurement method for the continuous measurement of the concentration of fine dust in ambient air. The instrument is certified equivalent to the reference method in accordance with the EN12341 European ...
-
PremiumManufactured by ENVEAbased in FRANCE
Multi-sensor dust monitor for indicative emissions trending in industrial stacks after bag filters, cartridge filters, cyclones and process driers, where regulatory approvals are not necessary. Advanced Probe Electrification featuring long term data logging for process trend analysis and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you