Earthquake Monitoring Equipment For Monitoring And Testing Available In Northwest Territories
-
Manufactured by Advanced Geophysical Operations and Services Inc. (AGCOS)based in CANADA
SMMT receivers are designed for carrying out shallow marine EM surveys in transition zones at depths of up to 50m. They are based on high-precision and highly-sensitive land geophysical equipment for electroprospecting surveys and are built in such a way, that equipment can easily be used for land surveys or for simultaneous marine and land EM data acquisition as ...
-
Manufactured by Tokyo Gas Engineering Solutions Corporationbased in JAPAN
Using the SES70 Intelligent Earthquake Sensor, the amount of damage caused by earthquake motion can be estimated. Additionally, this unit makes a judgment regarding ground liquefaction based on the acceleration waveform characteristics, and outputs the ...
-
by OpenEEWbased in USA
Our dashboard reflects detected earthquakes and allows sensor owners to manage their devices. ...
-
Manufactured by Earthquake Safety Systems, Inc.based in USA
Suitable for: Control Rooms, Industrial Processes, Systems, Motors, Electronic Doors, Personnel Safety Alarms – via existing P.A. systems, Elevators, Solenoids and O.E.M. applications. Compliance with ASCE 25-97, ASME A17.1 and CA3137 is achieved with this highly flexible, stateof-the-art ...
-
Manufactured by GeoSIG Ltdbased in SWITZERLAND
The AC-73 sensor package is a true electro-mechanical triaxial downhole accelerometer designed for broadband earthquake monitoring and applications requiring highly sensitive and rugged sensors with minimum maintenance and a simple method for periodic testing. The rugged mass suspension moving coil system improves the signal to noise ratio. The magnetic system and capacitive position sensors ...
-
Manufactured by Self Closing Flood Barrier (SCFB) - Van den Noort Innovations BVbased in NETHERLANDS
HYFLO was established in January 2014 to set up the production for the Self Closing Flood Barriers (SCFB™) to meet the growing requirement for global solutions to extreme flooding events and to establish the highest possible quality for all the components. Therefor all the components were redesigned by Hyflo civil engineering specialists and there are subjected to strength calculations and ...
-
Manufactured by Advanced Geophysical Operations and Services Inc. (AGCOS)based in CANADA
All-in-One multifunction geophysical EM receiver GEPARD-4 is intended for sensitive and accurate registration of electrical and magnetic fields in wide frequency range, both in natural source and control source modes and wide exploration depth intervals. System works with variety of sensors, including grounded and non-grounded electric lines, high frequency and long period induction coil magnetic ...
-
Manufactured by Advanced Geophysical Operations and Services Inc. (AGCOS)based in CANADA
5AUSS-07A systems are manufactured by Advanced Geophysical Operations and Services Inc. and are designed for carrying out marine EM surveys at the depths of up to 100 meters. These systems are based on the use of high-precision and high-sensitivity geophysical equipment for EM surveys manufactured by Phoenix Geophysics Ltd. The systems are built in such a way that the equipment can easily be used ...
-
Manufactured by Sunstone Water Group Europe ApSbased in DENMARK
Sunstone’s self-contained mobile unit for water purification, high processing volumes and easy-to-use operation ...
-
Distributed by ITT Engineered Valvesbased in USA
Our Enidine brand viscous dampers are hydraulic devices that help protect customers’ structure and systems from unwanted shock and vibration due to earthquakes or other seismic events. These versatile devices are used on bridges, high-rise buildings, stadiums and city centers. Custom solutions have also been developed for power and utility sub-stations, power plants, oil and gas offshore ...
-
Manufactured by Güralp Systems Ltd.based in UNITED KINGDOM
The 3T borehole system designed for borehole diameters of 99 to 203 mm. The 3T analogue sensors can be combined with a DM24 borehole digitiser and EAM data acquisition module to build a fully networked authenticating digital instrument inside a single borehole. The instrument is supplied with surge protection and a strain relief mechanism to isolate the sensors in the instrument from motions in ...
-
Manufactured by ASIR Seismicbased in USA
The AF15 is ASIR’s readily deployed deep borehole 3-component omni-directional 15-Hz seismometer for use in microearthquake detection and monitoring. It is designed for up to 3000 m depths and each component consists of three single sensors in series. Features the highest current performance level in sensitivity, reliability, and ...
-
Manufactured by DAS Environmental Expert GmbHbased in GERMANY
SALIX is a gas scrubber system for process waste gases from wet benches that makes part of DAS´ Point-of-Use Waste Gas Treatment Portfolio. In the two-stage scrubber process pollutants are removed from the gas stream by chemical and physical absorption. In the scrubbing process the waste gases are passed through a two stage scrubber with different washing liquids. Access for operating and ...
-
Manufactured by GeoSIG Ltdbased in SWITZERLAND
The AC-73-DH sensor package is a true electro-mechanical triaxial downhole accelerometer designed for broadband earthquake monitoring and applications requiring highly sensitive and rugged sensors with minimum maintenance and a simple method for periodic testing. The rugged mass suspension moving coil system improves the signal to noise ratio. The magnetic system and capacitive position sensors ...
-
Manufactured by Williams Form Engineering Corporationbased in USA
Williams Pre-Stressing / Post Tensioning Systems consist of high tensile steel bars available in seven diameters from 1" (26 mm) to 3" (75 mm) with guaranteed tensile strengths to 1027 kips (4568 kN). They are provided with cold rolled threads over all or a portion of the bar's length. All tension components for the systems are designed to develop 100% of the bar strength. All components of ...
-
Manufactured by Reftek Systems Inc.based in CANADA
24-bit Strong Motion Accelerograph. 130-SMHR Strong Motion High Resolution Recorder provides accurate data and related information about seismic events, especially as they relate to buildings and structures. The 130-SMHR meets the USGS Advanced National Seismic System (ANSS) specifications for strong motion reference stations for deployment in urban areas. It is also certified under the ...
-
based in USA
Have you ever wondered how we collect data on real-world phenomena like earthquakes? Data acquisition tools sample signals from these events and convert them to digital form for input into a computer system. We buy a wide range of test equipment, including these brands and ...
-
Manufactured by Crystal Instrumentsbased in USA
Unlike traditional vibration test controllers that rely heavily on an external computer for real-time operation, the Spider-81 is the first vibration controller that directly integrates time-synchronized Ethernet connectivity with embedded DSP technology. This strategy greatly increases the control performance, system reliability and failure protection of the vibration test controller. It also ...
-
Manufactured by Reftek Systems Inc.based in CANADA
The SMHR2 combines Reftek's latest generation of universal broadband seismic recorder, with the advanced high resolution, force-balance accelerometer, model 147. Designed to facilitate installation, security and maintenance in a single, secure enclosure optimized for early warning system ...
-
Manufactured by Hefei Brans Measuring & Controlling Technology Co., Ltdbased in CHINA
Six-axis Force/Torque Sensor - A device that measures the outputting forces and torques from all three Cartesian coordinates (x, y and z). A six-axis force/torque transducer is also known as a multi-axis force/torque transducer, multi-axis load cell, F/T sensor, or six-axis load ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you