Electrochemical Monitoring Equipment For Monitoring And Testing In Texas
-
PremiumManufactured by Eureka Water Probesbased in USA
Oxidation reduction potential, or ORP, is a measure of how chemically oxidizing or reducing a body of water is. In general, the ORP of a solution determines what chemical reactions will tend to occur, indirectly affecting the types of flora and fauna that will thrive in the water. In well-oxygenated natural waters at equilibrium, dissolved oxygen (DO) dominates the ORP of the solution, ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
The vigi e-nose is an analyzer able to track VOCs, Sulfur compounds and other molecules as ammonia for example. It allows to provide a rich global fingerprint to correlate with human sensory evaluation as dynamic olfactometry as example. It is possible to train the vigi e-nose with human sensory samples to study correlation with ASTM 679-E04 or EN ...
-
PremiumManufactured by Kurita Water Industries Ltdbased in JAPAN
SSK System - Kurita’s Aeration Technology. The existence of plenty of bacteria in the system means that oxygen is consumed, the oxidation reduction potential exhibits a negative value, and the entire system is anaerobic. Traditionally, a slime layer is generated in the stagnant part but with Kurita´s technology, the stagnation part disappears. The combination of Kurita’s ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
Digital combustible detector for oxygen, toxic gases or combustible. The OLCT 10N is a digital combustible gas detector designed for to detect combustible, toxic gases or oxygen. Intended for use in combination with the MX 16, MX 32 and MX 43 controller, the OLCT 10N provides a fast and accurate response. All transmitter information is received by the controller in less than 1 second. ...
-
PremiumManufactured by Kurita Water Industries Ltdbased in JAPAN
Kuriverter™ RC technology by Kurita – the rejuvenation concept for RO membranes. Applications using Reverse Osmosis membrane technologies are everywhere in our lives: from tiny under counter units polishing our drinking water through industrial units preparing water for processes or purifying effluents for reuse, and massive seawater desalination plants producing thousands of m³ ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
Online analysis & control of gas ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
Designed for the detection of explosive gases, toxic gases or oxygen, this gas detector comes with a Wheatstone bridge output (OLC 100) or 4-20mA output (OLCT 100). Whatever your application Teledyne Gas and Flame Detection offers a solution: catalytic, electrochemical, semiconductor, or poison control version. ATEX approved, these detectors are available in explosion safe or intrinsically safe ...
-
PremiumManufactured by Siemens Industry, Inc. - Process Analyticsbased in USA
The ULTRAMAT 23 is an innovative multi-component gas analyzer which can be equipped with the following sensors: IR detector for IR-active gases, UV photometer for UV-active gases, H2S sensor (electrochemical), O2 sensor (electrochemical or paramagnetic), and used accordingly in numerous applications and industries. The integrated automatic calibration function using ambient air provides the ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
Online analysis and monitoring of sulfur compounds in natural ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
MEDOR® easy is a very simple auto GC-ED (MEDOR® Electrochemical wet cell Detector) for the analysis and monitoring sulfides and mercaptans in natural gas and gaseous fuels. This turnkey online solution MEDOR® easy monitor accurately all type of odorants blends depending on ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen Electrical Cement No. DW-30 is an inorganic, chemically-setting, magnesium oxide base material which develops a slight expansion while hardening into a porcelain-like body. Since Sauereisen No. DW-30 is dimensionally stable from -100oF to +900oF and will not corrode resistance wires at elevated temperatures, it is recommended for embedding heating elements and potting ...
-
Manufactured by Pem-Tech, Inc.based in USA
The PT205 Hydrogen Sulfide Sensor is designed to detect Hydrogen Sulfide in air and provides an analog output signal. The PT205 uses electrochemical cell technology to detect H2S in parts per million ...
-
Manufactured by Compur Monitors GmbH & Co. KGbased in GERMANY
The Tracer has its strength where other methods of leak detection would fail, because they have cross sensitivities to other gases. Such selectivity is requested in plants using or producing extremely toxic substances. These plants always have a „Zero Emission Policy“ in force. Here high sensitivity in combination with good selectivity is ...
-
Manufactured by ION Science Ltd.based in UNITED KINGDOM
The Carbon Monoxide (CO) single gas detector is a cost effective personal detector with 24 months of continuous operation. This wearable & personal CO gas detector has only one button to make use simple and alerts workers when Carbon Monoxide exceeds set safety ...
-
Manufactured by Design Controls LLCbased in USA
Our inline corrosion rate monitoring utilized the linear polarization resistance (LPR) method to produce a raw signal that is conditioned, amplified and digitized directly in the sensor itself. It is a valuable tool that can be easily and affordably deployed to provide both general and localized corrosion measurements quickly. Using an inline LPR corrosion sensor differs from using corrosion ...
-
Manufactured by AlpHa Measurement Solutionsbased in USA
This sensor is designed for the measurement of Free Chlorine, Chlorine dioxide and Dissolved Ozone in water. The potentiostatic method is an 'amperometric' measurement with constant potential, made through 2 metal electrodes and a reference electrode dipped in a cell. The current running through the cell consumes Chlorine or Ozone contents, thus requiring constant renewal through a constant ...
-
Distributed by Compass Remediation Chemicalsbased in USA
Compass offers delivery of both standardly packaged and custom blended solutions of potassium permanganate directly to your site, eliminating the need for on-site mixing and the health and safety concerns that go along with it. As mixing potassium permanganate on-site can be challenging, many choose to mix this chemical off-site. Our permanganates are also routinely tested for trace metals to ...
-
Manufactured by AlpHa Measurement Solutionsbased in USA
This sensor is designed for the measurement of Free Chlorine, Chlorine dioxide and Dissolved Ozone in water. The potentiostatic method is an "amperometric" measurement with constant potential, made through 2 metal electrodes and a reference electrode dipped in a cell. ...
-
Manufactured by ION Science Ltd.based in UNITED KINGDOM
Keeping Workers Safe and you Compliant! Industrial sites in the Oil & Gas, Petrochemical and Offshore sectors can be volatile places if the right safety measures are not in place. You need reliable and ATEX certified gas detectors to keep the workforce safe. Hydrogen Sulfide (H2S) may desensitise and render the body unconscious in no time at high concentrations, therefore, reliable personal ...
-
Manufactured by Alpha Omega Instrument, a brand of COSA Xentaur Corp.based in USA
The Series 3500 and 3510 Trace Oxygen Transmitters are blind transmitters designed to provide exceptional performance, accuracy, and stability. Shown here with optional explosion-proof ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you