Elemental Analysis Services For Monitoring And Testing Available In Morocco
-
based in USA
Bureau Veritas provides method development and validation services for a wide variety of compounds for which sampling and analysis protocols are not available. The service is applicable for active pharmaceutical ingredients (APIs), proprietary chemicals, industrial chemicals and intermediates, nanomaterials, as well as products in the client development pipeline. Bureau Veritas offers Industrial ...
-
based in INDIA
At IDS, we lay major emphasis on Computer Aided Engineering (CAE) and offer high quality Finite Element (FE) driven design work related to thermal, static, and dynamic phenomena that meets and exceeds industry standards of excellence. Our team has years of experience in helping customers make key design decisions based on the results of precise and accurate Finite Element Analysis ...
-
Manufactured by Aetna Bearing Companybased in USA
At Aetna, our design engineers always work directly with customers to develop not just solutions, but the types of customized solutions they need to meet the unique challenges they face. They use advanced engineering tools including Solid Works, AutoCAD, Finite Element Analysis (FEA) and MESYS to design products and analyze their performance. Our engineers have access to standard bearing ...
-
Manufactured by Kenway Corporationbased in USA
Kenway specializes in the fabrication and onsite chemical storage tank installation of new and replacement tanks across the United States including chloralkali tank installation. We combine over 60 years of experience with engineering expertise in the design and fabrication of cost-effective heavy corrosion resistant tanks and vessels. We have an extensive background with a tower, tower component ...
-
Manufactured by Integrated Turbomachinery Incbased in USA
3D imaging and dimensional inspection utilizing a FaroArm portable CMM. 3D computer assisted design and drafting. 3D finite element analysis. Worldwide reverse engineering and inspection utilizing a FaroArm CMM. Equipment and parts retrofit / redesign / rerate. Metallurgical services. Failure analysis. I/E ...
-
Manufactured by Costacurta S.p.A.-VICObased in ITALY
Costacurta can prepare construction drawings (2D – 3D), develop the mechanical design, performing, when needed, also the Finite Element Analysis ...
-
Manufactured by Neuman & Esser (NEA Group)based in GERMANY
NEAC Compressor Service employs a strong global team of engineers and technicians. All the technicians are trained in accordance with high standards to meet expert and technical requirements. Moreover, they meet the high worldwide work protection standards in accordance with OHSAS 18001. NEAC’s technical service works out modular solutions for all customer needs. In addition to flexibility, ...
-
based in USA
Energy Dispersive X-ray Spectroscopy (EDS), also known as EDS Analysis, is a qualitative and semi-quantitative X-ray microanalytical technique that can provide information about the elemental composition of a sample. The information generated by Energy Dispersive X-ray Spectroscopy also can be helpful in identifying coatings, and in some cases, foreign inorganic substances present in a ...
-
Manufactured by A4Fbased in PORTUGAL
Microalgae strain isolation and characterization. Inoculum production up to 200+ litres ...
-
based in USA
Maximum Contamination Levels (MCLs) exist for all environmental lead matrices including Lead in Soil. This category is many times related to playground or building drip line investigations. Once again, strict field sampling schemes should be employed (See FAQ) to ensure meaningful analytical results. AAS is employed. Results are reported in mg/kg (ppm). Accreditation and proficiencies are through ...
-
based in USA
In few industries is reliability more emphasized. The risk associated with the failure of key components is beyond measure. Verifying raw materials, analyzing failures and thoroughly testing new products are critical to maintaining a strong safety record. As a Nadcap approved laboratory, IMR maintains a strict quality system with tight control of all aspects of testing from sample tracking and ...
-
based in UNITED KINGDOM
Tony Gee was commissioned to undertake the design of a sheet pile retaining wall for Cardiff St David’s 2, a shopping centre development with a two-storey basement. The design work for the temporary and permanent conditions included temporary tie bars, ground anchors, temporary waling beams and props. One unusual aspect was that the piles were designed to support vertical loads from the ...
-
Manufactured by Bearings Plus, Inc.based in USA
Our technical support capabilities are unmatched by other bearings, seals, and coupling manufacturers. By offering a full rotordynamic analysis as part of our analytical services, Bearings Plus surpasses the level of technical support and rotating equipment expertise of our competitors. By evaluating the bearing, seal, and coupling characteristics simultaneously, we can evaluate the effect of ...
-
based in USA
Because materials and processes can be defined and controlled using physical properties as well as their elemental or molecular composition, Galbraith provides a wide variety of physical tests. A growing number of these tests are performed each year. Tests are performed in accordance with a wide range of Compendial methods from ASTM, EPA, TAPPI, and USP. In addition, Galbraith provides custom ...
-
Manufactured by Cambrex Corporationbased in USA
Key FDA and EMA Guidelines: Recent guidance from the FDA details the requirement for analytical methods utilized to generate elemental impurity data in support of a risk assessment, or as part of routine testing; must be shown to achieve suitable validation criteria. New Product submissions should follow the recommendations of ICH Q3D and USP <232>/USP <233>, which include executing a ...
-
Manufactured by Cedic S.r.l.based in ITALY
We have spent the last 50 years developing our internal R&D and Project Management capabilities of finished products and components which now comprise: Rapid prototyping via 3D Modeling & 3D Printing. Technical feasibility & assembly technology evaluation. Finite Element Analysis. Verification and Validation (V&V) in-house testing. Moulding process definition, optimisation & ...
-
Manufactured by Morrison Pump Companybased in USA
Our professional staff of Engineers offers a wide range of Engineering Services that include Pump Station 3D Modeling, Detailed System Integration Drawings, Lateral and Torsional Dynamic Analysis of Rotating Elements, Finite Element Analysis, Mechanical Simulation, System Design, Energy Optimization, and detailed Material Analysis. Morrison Pump Company can provide the engineering resources to ...
-
based in USA
Risk Management services range from the traditional assessment of risk for industrial complexes. We also assist with operational issues with upstream, mid-stream and downstream O&G facilities. We work closely with both operators and their consultants and contractors to identify, assess and reduce risk and thereby maximize competitive ...
-
Manufactured by Schivobased in IRELAND
We offer a range of medium to high volume precision machining solutions at our manufacturing site in Waterford ...
-
Manufactured by Kawak Aviation Technologies, Inc.based in USA
Kawak’s team of engineers utilizes 80+ years of collective experience and education in the aviation industry. Kawak uses this experience and expertise to create state-of-the-art solutions for agriculture, firefighting, and defense aviation sectors. Company philosophy at Kawak ensures all aviation engineering staff are exposed to multiple aspects of the design, manufacturing, and production ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you