Emissions Analyzers Downloads

  • Premium

    T Series Brochure

    Monitoring at a touch: The ultra-easy user solution. Criteria pollutant gas analyzers. Trace gas analyzers. Specialty gas analyzers. Mass flow calibrators. Continuous emissions monitors. Process, safety, and cleanroom ...


    By Teledyne API

  • Premium

    CaseStudy-airmoVOC BTEX - Brochure

    Urban pollution is a problem that concerns more and more people in charge of public health. In large cities, car emissions are an important source of atmospheric pollution. This problem is growing as the traffic keeps on increasing. BTEX compounds are present in car emissions. It is therefore important to be able to analyze them with short analysis cycle duration and on a continuous and automatic ...


    By Chromatotec Group

  • Premium

    Engine emissions measurements - application note

    GasmetTM FTIR application note Engine emissions measurements KEY WORDS • Engine exhaust gases • Fourier Transform Infrared (FTIR) OVERVIEW A combustion engine exhaust gas is a complex mixture of gases and particulate matter that changes in composition very rapidly. Multicomponent analysis of exhaust gases can be performed with a GasmetTM FTIR analyzer with a response time (T90) of one second. ...


    By Gasmet Technologies Oy

  • Premium

    Determination of TOC in stack

    Determination of TOC in stack through the innovative FID analyser easy to carry PROBLEM: The industrial chimney's emissions of Volatile Organic Compounds (VOCs) are becoming issues of global importance and to have an accurate knowledge about how to test VOC turns into a strategic issue. VOC emissions are quantified and monitored according to standard EN 12619, using FID analyzer which uses ...


    By Pollution Srl

  • Premium

    Determination of TOC in stack through the innovative FID analyser easy to carry

    The industrial chimney's emissions of Volatile Organic Compounds (VOCs) are becoming issues of global importance and to have an accurate knowledge about how to test VOC turns into a strategic issue. VOC emissions are quantified and monitored according to standard EN 12619, using FIDanalyzer which uses hydrogen and other reference gases in pressurized cylinder. Operators must then approach the ...


    By Pollution Srl

  • Premium

    TAPI - Model T703 - Photometric Ozone Calibrator

    USER MANUAL MODELS T703 and T703U PHOTOMETRIC O3 CALIBRATOR © TELEDYNE ADVANCED POLLUTION INSTRUMENTATION (TAPI) 9480 CARROLL PARK DRIVE SAN DIEGO, CALIFORNIA 92121-5201 USA Toll-free Phone: 800-324-5190 Phone: 858-657-9800 Fax: 858-657-9816 Email: api-sales@teledyne.com Website: http://www.teledyne-api.com/ Copyright 2010-2012 07223C DCN 6572 Teledyne Advanced Pollution ...


    By Teledyne API

  • Premium

    TAPI - Model T100 - UV Fluorescence SO2 Analyzer - Manual

    Operation Manual Model T100 UV Fluorescence SO2 Analyzer Also supports operation of: when used in conjunction with: Model T100U Analyzer T100U addendum, PN 06840 Model T100H Analyzer T100H addendum, PN 07265 Model T108 Analyzer T108 addendum, PN 07268 Model T108U Analyzer T100U addendum, PN 06840, and T108 addendum, PN 07268 © TELEDYNE ADVANCED POLLUTION INSTRUMENTATION (TAPI) 9480 ...


    By Teledyne API

  • Premium

    TAPI - Model T100H - High Range UV Fluorescence SO2 Analyzer - Manual

    MODEL T100H UV FLUORESCENCE SO2 ANALYZER Addendum to T100 Operation Manual, PN 06807 © TELEDYNE ADVANCED POLLUTION INSTRUMENTATION 9480 CARROLL PARK DRIVE SAN DIEGO, CA 92121-5201 USA Toll-free Phone: 800-324-5190 Phone: 858-657-9800 Fax: 858-657-9816 Email: api-sales@teledyne.com Website: http://www.teledyne-api.com/ Copyright 2011 PN 07265A DCN6038 Teledyne Advanced Pollution ...


    By Teledyne API

  • Premium

    TAPI - Model T700 - Dynamic Dilution Calibrator - Manual

    Operation Manual Model T700 Dynamic Dilution Calibrator Also supports operation of Model T700U (when used in conjunction with T700U addendum, PN 06876) © TELEDYNE ADVANCED POLLUTION INSTRUMENTATION (TAPI) 9480 CARROLL PARK DRIVE SAN DIEGO, CA 92121-5201 USA Toll-free Phone: 800-324-5190 Phone: 858-657-9800 Fax: 858-657-9816 Email: api-sales@teledyne.com Website: ...


    By Teledyne API

  • Premium

    Model T700H - Source Monitoring Dilution Calibrator - Specification

    The Model T700H is a microprocessor controlled dilution system for calibration of continuous emissions monitoring gas analyzers. It enables significantly reduced cylinder use and cost while improving on-site flexibility for gas concentrations and converter efficiency checks. The instrument is designed to meet or exceed the performance requirements of the U.S. EPA 40CFR Part 51 Method 205 Appendix ...


    By Teledyne API

  • Premium

    T Series – Brochure

    Criteria pollutant gas analyzers Trace gas analyzers Specialty gas analyzers Mass flow calibrators Continuous emissions monitors Process, safety, and cleanroom monitors ...


    By Teledyne API

  • Premium

    HORIBA - CC-100E - Converter Checker Brochure

    HORIBA Europe’s NOx Converter Checker CC-100E has been developed to test the e"ciency of NOx to NO converters, which are used in NOx gas analyzers for stack emission measurements or process gas ...


    By HORIBA Europe GmbH

  • Premium

    Model GCEM4000 - Multi-Channel In-Situ Flue Gas Analyser - Datasheet

    In-situ, low maintenance devices for continuous process and emissions monitoring. Multi-species infrared absorption analyser - Accurate, reliable and low maintenance technology In-situ stainless steel probe measurement - No sample lines required Gas temperature and pressure sensors - On-board normalisation to standard reference conditions Auto routine calibration - Zero calibration by air, span ...


    By Codel International Ltd

  • Premium

    Model GCEM40 - Single or Multi-Channel In-situ Flue Gas Analyser - Brochure

    The GCEM40 series is the latest generation of CODEL’s world renowned in-situ monitors. Our development, knowledge and practical experience have been utilised to produce this advanced technology gas analyser which gives complete flexibility of use on process or emissions applications whilst delivering superb accuracy and repeatability at a very competitive ...


    By Codel International Ltd

  • Premium

    Model GCEM4100 - Multi Channel Extractive Flue Gas Analyser Datasheet

    The GCEM4100 hot extractive multi-channel gas analyser is CODEL's industry-proven continuous emissions monitor for difficult applications. Designed exclusively for use on gas turbines or applications where the flue gas concentration is very low and the temperature is abnormally ...


    By Codel International Ltd

  • Premium

    Emissions DeNox

    GasmetTM in emissions monitoring – applications: Ammonia (NH3) based DeNOx - systems DeNOx scrubbers Process: NO and NO2 can be effectively reduced from stack gases by reacting them with ammonia: 4 NO + 4 NH3 + O2 ? 4 N2 + 6 H2O 6 NO2 + 8 NH3 ? 7 N2 + 12 H2O Measurement need Emissions: Ammonia is a criteria pollutant Process control: Ammonia is expensive Process control: Excessive ...


    By Gasmet Technologies Oy

  • Premium

    Emissions Cement

    GasmetTM in emissions monitoring – applications: Continuous Emissions monitoring in Cement Kilns Emissions from Cement Kilns Various pollutants are generated in cement manufacturing process. Due to very high process temperatures more oxides of nitrogen are generated than in normal waste incineration. FTIR – analyzer such as GasmetTM can easily cope with higher NOx ranges as well. High dust ...


    By Gasmet Technologies Oy

  • Premium

    Engine Emissions

    GasmetTM in research – applications: Engine Emissions Measurements Combustion Engine development A combustion engine exhaust gas is a complex mixture of gases and particulate matter that changes in composition very rapidly. Multicomponent analysis of exhaust gases can be performed with a GasmetTM FTIR analyser with a response time (T90) of one second. This is achieved with the ...


    By Gasmet Technologies Oy

  • Premium

    InfraCal 2 Soot Meter Portable, Rugged Infrared Analyzer - Datasheet

    The InfraCal 2 Soot Meter complies with ASTM D7686 method for measuring soot in in-service lubricants. Soot is an important oil and engine condition indicator. More stringent emission requirements as well as saving costs with extended drain times make it more important than ever to routinely check soot levels. Infrared spectroscopy is a well-established laboratory method for testing used ...


    By Spectro Scientific

  • Premium

    Flexibility & Versatility of a Portable Emissions Analyzer - Application Note

    CEMS are fixed units that typically only measure from one sample location which is usually on a main centralized stack. This main stack is often fed by several separate emissions sources throughout the plant such as boilers, heaters, engines, ovens, and furnaces. If the CEM is measuring emissions that are higher than the regulated or permitted limits, it can be difficult to determine the source ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you