Combustion Emissions Monitoring (Emissions Monitoring) Equipment Available In Connecticut
-
ShowcaseManufactured by Testo, Inc.based in USA
Measurement accuracy, configurable measurement display, parallel measurement options, intuitive operation, sturdy housing, connection option to the testo Smart App: Our flue gas analyzer testo 310 II offers everything that heating fitters and technicians need for practical work on heating ...
-
PremiumManufactured by Testo, Inc.based in USA
The testo 310 II has two measurement cells for O2 and CO, and a temperature sensor integrated into the flue gas probe. The gas sensors measure the exact oxygen and carbon monoxide content as well as the flue gas and ambient temperature. From these data, all relevant measurement parameters such as CO2 value, degree of effectivity and flue gas loss are calculated. In addition, the measuring ...
-
PremiumManufactured by ENVEAbased in FRANCE
Rack 3U monitor using the TDL extractive technology to measure online the NH3 pre and/or post catalyst: SCR (Selective Catalytic Reduction) or SNCR (Selective Non-Catalytic Reduction) ENVEA is offering Laser Gas Detection (LGD) modules with exceptional advantages and value for the customer. Tunable Diode Laser Spectrometry (TDLS), ...
-
PremiumManufactured by Testo, Inc.based in USA
Hairline cracks in pipes, old and worn out gaskets. Even the tiniest of gas leaks in a natural gas pipe can cause enormous problems. The new testo 316-1 leak detector will help you pinpoint the exact position of a leak when the leak has already been detected using a leak measuring device, for ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
The ATP-300B is a compact, lightweight and integrated high performance infrared spectrometer based on Fourier transform technology. The product consists of a light source, interferometer and detector. The spectrometer adopts a double hollow corner reflector with double pendulum design,which has the advantages of permanent alignment, good anti-vibration and anti-thermal effect; The detector is an ...
-
PremiumManufactured by Testo, Inc.based in USA
The testo 316-3 is our best refrigerant leak detector yet, and delivers dependable, rugged performance at a great value. The heated diode sensor provides sensitivity down to 0.15 ounces/year including the new refrigerant blends like R-410A, R-407C, and R134-a, allowing you to quickly locate refrigerant leaks. Just turn it on and start getting readings immediately. Thanks to automatic zeroing, the ...
-
PremiumManufactured by ENVEAbased in FRANCE
Single reaction chamber version for the monitoring of NO or NOx, or dual chamber for NO, NOx and NO2 measurements. Exist in 2 different versions: TOPAZE 52M-S : NO or NOx monitoring. TOPAZE 52M-D : NO-NOx and NO2 simultaneous ...
-
PremiumManufactured by Testo, Inc.based in USA
The number of solid fuel burning systems, and the fine particles they emit, has continued to soar over the past years. This, and the amendment of 1. BlmSchV, has presented chimney sweeps, heating engineers, and service technicians with a new and formidable challenge. The testo 380 fine particle analyzer is designed to aid these professionals in performing easy and precise fine particle ...
-
PremiumManufactured by Testo, Inc.based in USA
When house owners notify the network operator or fitter that they can clearly smell gas in the house, a highly explosive gas concentration may already be present (4–17%). The fitter has to use a gas detector to check sections of gas pipes for leak tightness to locate possible ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati High Temperature ELPI+ (Electrical Low Pressure Impactor, HT-ELPI+) is a unique version of the Dekati ELPI+ that enables real-time measurement of particle size distribution from 6 nm up to 10 μm with 10 Hz sampling rate. The High Temperature ELPI+ allows direct measurement of up to 180 °C high temperature aerosol samples without the need to cool the sample, which makes the ...
-
PremiumManufactured by Testo, Inc.based in USA
With its ability to perform both basic and more complex combustion analysis, maintenance, safety checks, and boiler efficiency confirmations, the fully featured testo 310 residential combustion analyzer is ready to provide accurate analysis. The stainless steel probe and cone-stop are perfect for residential and boiler efficiency ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati PM10 Impactor is a three-stage cascade impactor for determining particle gravimetric mass size distribution. The operating principle of the Dekati PM10 impactor is based on inertial size classification and gravimetric or chemical analysis of the collected, size classified particle samples. This impactor has cutpoints of 10, 2.5 and 1 μm making it an ideal choice for PM10, PM2.5 and ...
-
Manufactured by ABB Measurement Productsbased in SWITZERLAND
The Endura AZ20 is the latest in a long line of high-quality, combustion gas analyzers from ABB. The in situ measurement provides accurate and rapid oxygen reading for combustion control optimization and emissions ...
-
Manufactured by Signal Group Ltdbased in UNITED KINGDOM
Series IV Pulsar multi-gas NDIR analyser for industrial gas applications, combustion research, emissions monitoring and gas purity measurement (with optional oxygen analyser). This design uses a single cell with a rotating gas filter wheel to provide a zero and reference value and minimise cross interference. Using a single cell prevents ...
-
Manufactured by Systronik Elektronik u. Systemtechnik GmbHbased in GERMANY
The TÜV-tested MULTILYZER® STx is a handheld measuring instrument for industrial combustion, emission and process ...
-
Manufactured by Bhoomi Process Management Pvt. Ltd.based in INDIA
The Agasthya 2013 Series Insitu Zirconia Oxygen Analyzer BI 2100-S is designed for Combustion Process & Emission Monitoring where flue gas temperature is upto 700 deg C. It provides accurate measurement of excess oxygen in flue gas of combustion processes. Optimal combustion efficiency is achieved by ...
-
Manufactured by CIC Photonicsbased in USA
Gas purity. Gas monitoring. Electronic specialty gases. Exhaust and combustion gas monitoring. Moisture analysis. Semiconductor manufacturing and cleaning gases. Toxic / Corrosive gas ...
-
Manufactured by CIC Photonicsbased in USA
Gas purity. Gas monitoring. Electronic specialty gases. Exhaust and combustion gas monitoring. Moisture analysis. Semiconductor manufacturing and cleaning gases. Toxic / Corrosive gas ...
-
Manufactured by CIC Photonicsbased in USA
CIC Photonics often designs custom solutions for our customers. Often these solutions are based on our standard product lines, including enhancements or modifications to these standard systems. Sometimes, however, our customers need something that doesn"t exist. In these cases we will design solutions from scratch and provide our warrantee and guarantee of quality and reliability for the ...
-
Manufactured by Eurotron Instruments (UK) Ltd.based in UNITED KINGDOM
The MCERTS certified EiUK Rasi 800 is a portable combustion and emissions analyser capable to monitor up to 9 gases simultaneously. The MCERTS certified Rasi 800 is a portable emission and combustion analyser designed for emissions monitoring, maintenance and tuning of ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you