Emissions Monitoring (Emissions Monitoring) Equipment In Latin America
-
PremiumManufactured by ENVEAbased in FRANCE
The Leak Locate 660 PLUS is a dust emission monitoring system incorporating a digital network and advanced graphics capability. It is designed for use in any processes where filter type arrestment plant are used, eg bag, ceramic and cartridge filters. The system comprises up to 32 networked sensors, a central control unit, user interface with ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
Simple, lightweight dust and opacity monitor designed to measure emission levels in combustion processes where regulatory compliance is not required (for sale in Asia only). The 4200 dust and opacity monitor is AMETEK Land’s compact, cost-effective solution for the continuous monitoring of dust, smoke and particulates in a ...
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Continuous Emission Monitoring System CEMS II e offers modular and TÜV and MCERTS certified (QAL1) solution for environmental compliance in industrial processes, such as powerplants, waste incineration, cement plants and beyond. The system adjusts to changes in regulations and future advances of emissions monitoring best ...
-
PremiumManufactured by ENVEAbased in FRANCE
Beneficiary of over 20 years of experience in mercury measurement, the new SM-5 CEMS Hg analyzer is designed to provide extremely accurate and reliable continuous measurements of very low concentrations of Hg in flue gas emissions. The SM-5 features short response times, dynamic ranges and stable measurement under all ...
-
PremiumManufactured by Cerex Monitoring Solutions, LLC.based in USA
FT 5000P, FT 5000C, FT 5000C-RM. FTIR-based Continuous Emissions Monitoring. Cross stack, Probe based, and UVDOAS FTIR hybrid systems. 400 available compounds. Operational range in ppb, ppm, and higher. Extractive Process Monitoring, Ambient Point ...
-
PremiumManufactured by Cerex Monitoring Solutions, LLC.based in USA
.UV-FTIR (In-Situ): Dual Channel FTIR and UV-DOAS Continuous Emissions Monitoring. All criteria gases with one analyzer. Cross stack and parallel cell models. Insitu stack monitoring, non contact. Outdoor model ...
-
PremiumManufactured by Cooper Environmental / Sailbri Cooper Inc.based in USA
Cooper Environmental’s Xact® 640 is the first Multi-Metals Continuous Emissions Monitor to be proven successful for accurately measuring elemental concentrations in smoke stacks by capturing and measuring both particulate and vapor phase metals. The Xact® 640 system uses reel-to-reel filter tape sampling and nondestructive ...
-
PremiumManufactured by ENVEAbased in FRANCE
The QAL 181 dust analyzer is suitable for measuring particle emissions after both bagfilter and electrostatic precipitator arrestment plant. The monitor is suitable for measuring both low (0.1mg/m3) and high particulate concentration levels (300mg/m3). TÜV and MCERTS ...
-
PremiumManufactured by ENVEAbased in FRANCE
The DM 170 is designed to comply with the TÜV suitability testing scheme to EN 15267 and for measuring dust concentrations in a wide range of industrial ...
-
PremiumManufactured by ENVEAbased in FRANCE
Continuous, accurate and reliable measurement of total mercury emissions, even in very low concentrations and within complex matrices (SO2, NOx, HCl, etc.). With over 20 years experience, Mercury Instruments (part of ENVEA Group) were the first to develop mercury monitors and mercury analyzers using a dry thermocatalytic method instead of ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
Our RD100 Real Driving Emissions system is an accurate and reliable monitoring system that can measure the emissions from car exhaust in real life conditions. The RD100 system is mounted on a car and measures the real driving emissions during an ordinary ...
-
PremiumManufactured by Environics, Inc.based in USA
The Environics Continuous Emissions Monitoring Calibration Systems (CEMCS) have been used in CEM vans and laboratories for over twenty-five years. They meet or exceed the performance requirements of the United States EPA 40 CFR Part 51 Method 205 Appendix M. The accuracy and repeatability make them the unit of choice for source ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
We can provide a range of accredited, portable or continuous emissions monitoring systems which satisfy both operator and regulatory requirements including the waste incineration directive (WID), large combustion plant directive (LCPD) and the newer industrial emissions directive (IED). These systems are currently operational in a number of ...
-
PremiumManufactured by ENVEAbased in FRANCE
Continuous, accurate and reliable measurement of total mercury emissions, even in very low concentrations and within complex matrices (SO2, NOx, HCl, etc.). With over 20 years experience, Mercury Instruments (part of ENVEA Group) were the first to develop mercury monitors and mercury analyzers using a dry thermocatalytic method instead of ...
-
PremiumManufactured by Cerex Monitoring Solutions, LLC.based in USA
Aeres-XL (In-Situ): UV-DOAS based Continuous Emissions Monitoring. Application specific configurations. Operational range in ppb, ppm, and ...
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Analyzer for Oxygen Measurements: Gasmet oxygen analyzer is designed for continuous oxygen measurement of wet or dry flue gas. This extractive analyzer is suitable for various industrial applications where reliable and accurate oxygen measurement is ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
Waste incinerators, cement plants and power plants need good and reliable measurements of total gaseous mercury. The measurement of total gaseous mercury (TGM) is a challenge due to chemical reactions and contamination. The installed systems will often require a lot of maintanence still not giving reliable ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
OPSIS offers compact analyser packages for monitoring NOX, SO2, CO and O2 in many different kinds of stack gas ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
OPSIS data logger system is designed for data acquisition applications. The data logger can handle analogue and digital input and output signals as well as serial ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
Automatic gas calibration is available by using calibration gas and prefilled calibration cell. The gas cell is filled with a mixture of gases allowing all gases measured by the system to be checked. All data from gas calibration and automatic QAL 3 checks are stored in separate calibration data files, and are sent to the reporting software for ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you