Only show results available in Massachusetts? Ok

emissions monitoring calibration (Emissions Monitoring) equipment

  • Environics - Model 4040 - Continuous Emissions Monitoring (CEM) Calibration Systems

    The Environics Series Continuous Emissions Monitoring Calibration Systems (CEMCS) have been used in CEM vans and laboratories for over twenty years. They meet or exceed the performance requirements of the United States EPA 40 CFR Part 51 Method 205 Appendix M.Our systems are custom built, computerized, mass flow controller based gas calibration ...

    By Environics, Inc. based in Tolland, CONNECTICUT (USA). from Gas Dilution System and Gas Divider Product line

  • Premium

    OPSIS - Calibration Equipment

    OPSIS offers a range of calibration equipment for use with its CEM and process control systems. The system is based on the CB100 calibration bench. This is used with an external CA150 light source, and with an RE060 receiver at each end of the bench itself. Calibration is carried out by inserting cells with transparent windows into the short light ...

    By Opsis AB based in Furulund, SWEDEN. from Continuous Emissions Monitoring - Accessories Product line

  • Premium

    Sensor Calibration Using the Dosed-Reference-Method

    The measurement result of the sensor is only as good as the reference to which it has been calibrated. For this reason we have developed the dosed-reference-method as an alternative to isokinetic dust sampling. The main basic idea of this is that a mass flow is dosed into the system which corresponds to a required concentration at a specific flow ...

    By ENVEA based in Poissy, FRANCE. from Process - Dust Measurement Product line

  • Premium

    ENVEA - Model ProSens - Dust Measurement After Filters

    Provides continuous measurement values for dust concentration as a trend signal or absolute values. The ProSens has been specially developed to carry out reliable dust measurement on clean sides after filters. The measuring device provides measurement values for dust concentration, either as a trend signal or as absolute values (after calibration) ...

    By ENVEA based in Poissy, FRANCE. from Process - Dust Monitors Product line

  • Premium

    OPSIS - Automatic QAL 3 Calibration System

    Automatic gas calibration is available by using calibration gas and prefilled calibration cell. The gas cell is filled with a mixture of gases allowing all gases measured by the system to be checked. All data from gas calibration and automatic QAL 3 checks are stored in separate calibration data files, and are sent to the reporting software for ...

    By Opsis AB based in Furulund, SWEDEN. from Continuous Emissions Monitoring - Accessories Product line

  • Premium

    ENVEA - Model ProSens - Dust Detection

    The ProSens was specially developed to carry out reliable dust measurement on clean sides after filters.

    By ENVEA based in Poissy, FRANCE. from Process - Dust Monitors Product line

  • Sintrol - Model S304 - Dust Monitor

    Emissions monitor that can be calibrated to give mg/m3 output. For applications requiring absolute value measurements of dust concentrations, the S304 can be calibrated to give the user a mg/m3 output.  Once calibrated, this dust monitor helps plant operators know exactly how much dust is passing through the stack or outlet duct of their ...

    By Sintrol Oy based in Helsinki, FINLAND. from Process Monitoring Product line

  • Model PFM 02 Ex - Filter Controller

    For monitoring dust emissions and detecting effectively damages at filtering precipitators . The device is simple in construction and very user-friendly. The integrated micro-controller allows numerous possibilities to use the PFM 02 Ex as well as a timely monitoring of the dust emissions.  Target value calibration: Enter a known, averaged ...

    By Dr. Födisch Umweltmesstechnik AG based in Markranstädt, GERMANY. from Filter Monitoring Product line

  • D&P - Model Micro FT - High Throughput FT-IR Interferometer

    The Micro FT is a patented reciprocating refractive scan interferometer. It can be used for a very compact, high throughput spectrometer. The current design is optimized for maximum throughput for commercially available high sensitivity Thermal IR detectors. It is also the heart of our Model 102 portable spectrometer, and was used previously in ...

    By D&P Instruments, Inc based in Simsbury, CONNECTICUT (USA). from Technology Product line

  • Matheson - Model 3530A Series - Single-Stage High-Purity Brass Regulator

    High-purity regulators designed for analytical applications. Use with non-corrosive gases.

    By Matheson Tri-Gas, Inc. based in Montgomeryville, PENNSYLVANIA (USA). from Regulators Product line

  • CMC SmartCEMS - Model RASCAL - Remote Automated Sample and Calibration

    The SmartCEMS Remote Automated Sample and Calibration, or RASCAL, interfaces with the PEMS or DAHS and performs automatic audits and report generation for PS-16 compliant RAAs. The remote calibrator is used with a portable analyzer to provide a complete automated compliance package minimizing maintenance staff and costs for PEMS QA onsite.

    By CMC Solutions, LLC based in Farmington Hills, MICHIGAN (USA). from Hardware Components Product line

  • Dekati - Model DEED - Engine Exhaust Aerosol Diluter

    The Dekati Engine Exhaust Diluter DEED is an engine exhaust conditioning system that fulfills all requirements and recommendations set forth by EURO 6 legislation for a VPR (Volatile Particle Remover). The DEED unit can be used together with any particle concentration or size distribution measurement device since the sample at the outlet of the ...

    By Dekati Ltd. based in Kangasala, FINLAND. from Aerosol Dilution & Sample Conditioning Product line

  • Ankersmid - Model ASP 300, ASP 400, ASP 500 - Gas Sample Probe

    Due to its modular design and various options, the Ankersmid heated sample probe filters cover the widest range of applications. With a choice of different lengths of heated filter body, a filter element of 150mm length, suitable for most applications up to 1g dust/m3 can be integrated. 180mm filters with a larger filter surface are used for ...

    By Ankersmid Sampling - Ankersmid Group based in Wilrijk, BELGIUM. from Ankersmid Sampling Product line

  • LASAR - Laser Absorption Spectrometer

    The SEMTECH LASAR is a multi-gas analyzer that accurately measures gas concentrations from trace levels to full concentrations. SEMTECH LASAR is an optical feedback, cavity enhanced, laser absorption spectrometer, capable of measuring both trace levels and high concentrations of a wide range of gases. This high precision, multi-gas analyzer has ...

    By Sensors, Inc. based in Saline, MICHIGAN (USA). from Test Cell Emissions Analyzers Product line

  • Opus AccuScan - Remote Sensing Devices (RSD)

    Opus AccuScan™ Remote Sensing Devices (RSD) remotely measure exhaust emissions from motor vehicles as they are driven past the remote sensing device on streets and highways. The emissions are measured spectroscopically by casting a narrow infrared (IR) and ultraviolet (UV) beam of light across the road and through the trailing exhaust ...

    By Opus RSE based in Madrid, SPAIN.

  • Ankersmid - Model APP 100 - Portable Gas Sample Probe

    Due to various acid dew points at various applications the probe is heated up to 180°C. A filter element of 150mm is integrated, suitable for most applications up to 1g dust/m3. A significant advantage is that this filter is replaceable without dismounting the probe. with the filter element of 150mm length this probe is suitable for most ...

    By Ankersmid Sampling - Ankersmid Group based in Wilrijk, BELGIUM. from Ankersmid Sampling Product line

  • Ankersmid - Model ASP 100 - Gas Sample Probe

    Due to various acid dew points at various applications the probe is heated up to 180°C. A filter element of 150mm is integrated, suitable for most applications up to 1g dust/m3. A significant advantage is that this filter is replaceable without dismounting the probe and without using any tools. Due to its modular design and various options, ...

    By Ankersmid Sampling - Ankersmid Group based in Wilrijk, BELGIUM. from Ankersmid Sampling Product line

  • Ιsokinetic Stack Sampling

    ENCO offers a complete range of off-line sampling equipment for dust and gaseous emissions. They are all instruments operating with standard reference methods (EN, ISO and US EPA methods) and are used for periodic measurements according to the environmental legislation, spot measurements or for calibration of continuous emission analysers  ...

    By ENCO LTD based in Athens, GREECE. from Industrial Emissions Product line

  • Model Hovacal - Calibration Gas Generator

    HOVACAL is a calibration gas generator especially designed for calibration of continuous emission monitoring systems. HOVACAL generates a defined mixture of air and water vapor and is also able to generate different other gas vapor mixtures like mercury chloride, hydrogen chloride, ammonia, hydrogen fluoride and others with defined concentration. ...

    By EcoChem Analytics based in League City, TEXAS (USA).

  • Ankersmid - Model ASP 611/613/622 ATEX - Gas Sample Probe

    Due to its modular design and various options, the Ankersmid heated sample probe filters cover the widest range of applications. In the heated filter body a filter element of 150mm length, suitable for most applications up to 1g dust/m3, is integrated. A 180mm long filter with an outer diameter of 40mm and made of stainless steel can be optionally ...

    By Ankersmid Sampling - Ankersmid Group based in Wilrijk, BELGIUM. from Ankersmid Sampling Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you