Only show results available in Connecticut? Ok

emissions monitoring requirement (Emissions Monitoring) equipment

  • Premium

    Cerex - Model FT5000P - Insitu Probe CEM Stack Analyzer - Multi-Gas FTIR Stack Analzyer

    The Cerex FT5000P is a fixed Continuous Emissions Monitor for applications requiring a stack or process probe. The FT5000 P analyzer provides real-time multi-gas qualification and quantification of gases commonly found in stack emissions. Multiple detector options and probe lengths are avaialble to meet the exact requirements of the installation.

    By Cerex Monitoring Solutions, LLC. based in Atlanta, GEORGIA (US) (USA). from CEMs / Stack Analyzers Product line

  • Premium

    AMETEK PI - Model 910 - Hot/Wet Multi-Gas Mass Flow CEM

    The 910 is specifically configured for monitoring the stack emissions of multiple pollutants on a mass rate basis. It measures stack effluent temperature and velocity in addition to as many as five pollutant concentrations at stack conditions, enabling each pollutant's mass emission rate to be reported. With the addition of an optional zirconium ...

    By AMETEK Process Instruments based in Pittsburgh, PENNSYLVANIA (USA). from UV Vis Product line

  • Premium

    Ion Science - Model BL Series - Disc Pump

    Our entry-level BL Series strikes a balance between performance and cost. In common with all Disc Pumps. BL Series devices combine silent operation, pulsation-freeflow, millisecond response and high precision in a compact form factor.

    By Ion Science Ltd. based in Royston, UNITED KINGDOM. from Instruments - Disc Pumps Product line

  • Premium

    AMETEK PI - Model 920 - Hot/Wet Multi-Gas CEM

    The 920 is specifically configured for monitoring the stack emissions of multiple pollutants on a concentration basis. It measures as many as five pollutants at stack conditions. With the addition of an optional zirconium oxide sensor, the 920 is capable of monitoring oxygen.

    By AMETEK Process Instruments based in Pittsburgh, PENNSYLVANIA (USA). from UV Vis Product line

  • Premium

    AMETEK PI - Model 909 - Hot/Wet Single Gas Mass Flow CEM

    Due to compliance regulations, it is not adequate to simply know the concentration of pollutants in the stack gas emissions. A facility is required to monitor and report the mass emissions (e.g. lb/hr, kgs/day, etc.) of their processes.

    By AMETEK Process Instruments based in Pittsburgh, PENNSYLVANIA (USA). from Western Research Product line

  • Premium

    Cerex - Model FT5000C - Extractive CEM and Ambient Air Analyzers

    The Cerex FT5000C and FT5000CRM are multi-gas FTIR analyzers suitable for continuous emissions monitoring, process monitoring, RATA, Quad J and Quad Z compliance monitoring, and ambient air monitoring applications.

    By Cerex Monitoring Solutions, LLC. based in Atlanta, GEORGIA (US) (USA). from Fixed Mount Point Analyzer Product line

  • Premium

    AMETEK PI - Model 919 - Hot/Wet Single Gas Analyzer

    The 919 is specifically configured for monitoring stack emissions on a concentration basis. With the addition of an optional zirconium oxide sensor, the 919 is capable of monitoring oxygen. Robust and reliable analyzer, the 919 has no-moving-parts, UV-based measurements do not suffer from H2O and CO2 interference. This greatly simplifies sample ...

    By AMETEK Process Instruments based in Pittsburgh, PENNSYLVANIA (USA). from UV Vis Product line

  • Premium

    Air Gas Ratio Control (AGRC) System

    The Dürr MEGTEC Air Gas Ratio Control (AGRC) system measures and controls gas and air flows continuously through the programmable logic controller (PLC). This system uses less energy and delivers lower emission rates than a comparable non-AGRC equipped regenerable thermal oxidizer (RTO), two important factors when operating gas-fired ...

    By Dürr Systems, Inc. based in De Pere, WISCONSIN (USA).

  • Premium

    Zetian - Model DMS-200 - Probe-in Dust Particulate Matter Monitoring

    Different from DMS-100, DMS-200 is installed on the probe, access to the flue pipe through the probe directly to realize flue dust measurement, so it is possible to achieve very low detection limits. It is widely used in dust monitor of thermal power generation and other ultra-low emissions industries.

  • Premium

    Ion Science - Model XP Series - Disc Pump

    The XP Series offers our highest performance, efficiency and widest operating temperature range of -25 to 55°C to suit the most demanding applications. Our highest-performance, efficiency and widest temperature range. Tightening legislation and the growing global focus on air quality, worker safety and environmental emissions are driving the ...

    By Ion Science Ltd. based in Royston, UNITED KINGDOM. from Instruments - Disc Pumps Product line

  • RACI - Emission Automated Evaluation Systems

    With long-term experience in the field of automated evaluation systems (AES) used for emission monitoring RACI company is able to offer contemporary, proven and user friendly automated evaluation systems (AMS) according to emission monitoring reporting requirements. Our trademark guarantees competent and compliant solutions, high reliability, ...

    By RACI d.o.o. based in Ljubljana, SLOVENIA. from Continuous Emission Monitoring Systems Product line

  • FIDOR - Model GMS800 - Extractive Gas Analyzers

    A member of the GMS800 analyzer family, the GMS800 FIDOR extractive gas analyzer is ideally suited for emission monitoring according to regulatory requirements (in waste incinerators, cement and/or power plants, for example). Based on the proven flame ionization detection principle, the GMS800 FIDOR measures total hydrocarbon concentrations in ...

    By Sick Automation based in Waldkirch, GERMANY. from Gas Analyzers- Extractive Gas Analyzers Product line

  • Campbell Scientific - Model SR50A-L - Sonic Distance Sensor

    The SR50A Sonic Distance Sensor provides a non-contact method for determining snow depth. It determines depth by emitting an ultrasonic pulse and then measuring the elapsed time between the emission and return of the pulse. An air temperature measurement is required to correct for variations of the speed of sound in air. Note: Campbell Scientific ...

    By Campbell Scientific, Inc. based in Logan, UTAH (USA).

  • McPherson - Model 625 - Mercury Calibration Source

    Mercury calibration lamps are small, rugged, and easy to use. Because the lamps operate at low pressure, well spaced, intrinsically narrow and bright Mercury emission lines dominate the output spectrum. Background between the lines is very low. The output wavelengths are known exactly and are ideal for spectral calibration. Single lines ...

    By McPherson based in Chelmsford, MASSACHUSETTS (USA). from Light Sources Product line

  • Custom CEM Systems

    CEM Specialties Inc. designs and manufactures continuous emission monitoring (CEM) systems to meet application-specific requirements. Systems range from single component analyzers to multiple components for measurement with dedicated analyzers. CEM systems typically include: a sample probe, a heated sample umbilical, a gas cooler, a system ...

    By CEM Specialties Inc. based in London, ONTARIO (CANADA).

  • Continuous Emission Monitoring Systems (CEMS)

    ENCO co-operates with worldwide leading manufacturers supplying certified CEMS of exceptional quality and reliability.

    By ENCO LTD based in Athens, GREECE. from Industrial Emissions Product line

  • Emission Measurement Plant

    Industrial plants requiring approval are subject to strict requirements for compliance of emissions limit values. For monitoring it is only allowed to use measuring devices approved by the Federal Environment Agency. The approval requirements are defined in EN 15267. The number of measured components depends on the plant type, but also on the used ...

    By CEM Specialties Inc. based in London, ONTARIO (CANADA). from Gas Analytics Product line

  • CMC SmartCEMS - Model RASCAL - Remote Automated Sample and Calibration

    The SmartCEMS Remote Automated Sample and Calibration, or RASCAL, interfaces with the PEMS or DAHS and performs automatic audits and report generation for PS-16 compliant RAAs. The remote calibrator is used with a portable analyzer to provide a complete automated compliance package minimizing maintenance staff and costs for PEMS QA onsite.

    By CMC Solutions, LLC based in Farmington Hills, MICHIGAN (USA). from Hardware Components Product line

  • Protea - PC Controllers

    Protea’s range of core gas analysers use Windows-based PCs for analyser control and data storage. For use in industrial process and emissions measurement applications a rugged and robust analyser controller is required.

    By Protea Limited based in Middlewich, UNITED KINGDOM. from System Solutions Product line

  • Model DT109 - Opacity Monitor

    The Model DT109 is the perfect solution for monitoring visible emissions where a compliance system is not required. Has many applications other then stacks such as dust from conveyor systems. The Model DT109 allows for continuous monitoring of emission levels which helps you stay below EPA limits at all times. When bags become worn or ripped, ...

    By Redkoh Industries, Inc based in Hillsborough Township, NEW JERSEY (USA). from Pollution Monitoring Equipment Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you