EN Standards Equipment For Monitoring And Testing Near Nunavut
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
Laboratory-precise five components gas analysis, anywhere according to DIN EN 15267 - 3, DIN EN 14181. Approved as Standard Reference Method (SRM) for: CO (DIN EN 15058). O2 (DIN EN 14789). NOx (DIN EN ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
Mercury determination in the trace and ultratrace range. Efficient - automated and time-controlled flow injection technology. Safe - bubble sensor, optimized drying membrane and cascade enrichment. Effective - low reagent consumption, short measurement ...
-
Manufactured by Servomex - a Spectris Companybased in USA
High performance carbon dioxide and oxygen monitoring in the only fully portable format currently available for CEM testing and verification. The MiniMP is a high performance CO2 and O2 gas analyzer you can really depend on. With easy and intuitive operation and single or dual CO2 and O2 measurement functions, MiniMP is ideal for a wide range of measurement ...
-
Manufactured by Palas GmbHbased in GERMANY
PMFT 1000 F as an all-rounder in the testing of almost all mask and filter types. Test of total penetration better than the standard, exact analysis of filter mask efficiency from 145 nm to 5 ...
-
Manufactured by Palas GmbHbased in GERMANY
PMFT 1000 for development and production monitoring of half masks. Test of total penetration better than the standard, exact analysis of filter mask efficiency from 100 nm to 3 ...
-
Manufactured by Hughes Safety Showers - A Justrite Group Companybased in UNITED KINGDOM
Suitable for laboratories and general light duty indoor use, this over door mounted indoor emergency safety shower meets the requirements of the European Standard EN 15154 for laboratories. Powder coated 316L stainless steel pipework ensures resistance to corrosive and flammable liquids whilst also being easy to clean. Ideal for use where space is at a premium. Shower rose designed specifically ...
-
Manufactured by Hughes Safety Showers - A Justrite Group Companybased in UNITED KINGDOM
Maintain tepid water during high ambient temperatures in non-hazardous environments. This non-flameproof chiller unit is designed to maintain a tepid water supply inside Hughes emergency tank showers during hot ambient temperatures where there is a chance of the water overheating from solar radiation and scalding the casualty. It is set at 25º C and designed to maintain the tank water ...
-
Manufactured by Hughes Safety Showers - A Justrite Group Companybased in UNITED KINGDOM
Maintain tepid water during high ambient temperatures in hazardous environments. A flameproof chiller unit to temper water stored inside emergency tank showers in hot ambient climates, as stipulated by ANSI Z 358.1-2014 and EN 15154 standards. The chiller prevents water in tank showers from becoming dangerously hot and subsequently scalding the casualty using the shower. It is set at 25°C and ...
-
Manufactured by Hughes Safety Showers - A Justrite Group Companybased in UNITED KINGDOM
Floor mounted laboratory shower with eye/face wash; Suitable for laboratories and general light duty indoor use, this floor mounted indoor emergency safety shower with eye/face wash meets the requirements of the European Standard EN 15154 Parts 1 & 2. Powder coated 316L stainless steel pipework ensures resistance to corrosive and flammable liquids whilst also being easy to clean. Ideal for ...
-
Manufactured by Hughes Safety Showers - A Justrite Group Companybased in UNITED KINGDOM
Suitable for laboratories and general light duty indoor use, this ring main mounted indoor emergency safety shower meets the requirements of the European Standard EN 15154 for plumbed in laboratory showers. Powder coated 316L stainless steel pipework ensures resistance to corrosive and flammable liquids whilst also being easy to clean. Ideal for use where space is at a premium. Shower rose ...
-
Manufactured by Hughes Safety Showers - A Justrite Group Companybased in UNITED KINGDOM
Suitable for laboratories and general light duty indoor use, this ceiling mounted indoor emergency safety shower meets the requirements of the European Standard EN 15154 for plumbed in laboratory showers. Powder coated 316L stainless steel pipework ensures resistance to corrosive and flammable liquids whilst also being easy to clean. Ideal for use where space is at a premium. Shower rose designed ...
-
Manufactured by Hughes Safety Showers - A Justrite Group Companybased in UNITED KINGDOM
Pedestal mounted eye/face wash with powder coated stainless steel bowl. Designed to meet the requirements of the European Standard EN 15154 for Laboratories, this pedestal mounted eye/face wash is ideal for laboratories, schools and general light duty indoor use. Stainless steel bowl with an easy clean green powder polyester finish. Dust covers protect twin spray nozzles from contaminants and are ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Advanced Energy’s Andros 6552 gas analyzer is available with two gas channels and can be applied to any type or combination of refrigeration systems that employ FreonsTM and carbon dioxide. Ability to measure up to five gases. Rapid warm-up. Highly accurate calibration. Simple and fast system integration. RS232 or USB ...
-
Manufactured by Hughes Safety Showers - A Justrite Group Companybased in UNITED KINGDOM
Suitable for laboratories and general light duty indoor use, this wall mounted indoor emergency safety shower with eye/face wash meets the requirements of the European Standard EN 15154 Parts 1 & 2. Powder coated 316L stainless steel pipework ensures resistance to corrosive and flammable liquids whilst also being easy to clean. Ideal for use where space is at a premium. Fast, easy grip ...
-
Manufactured by Hughes Safety Showers - A Justrite Group Companybased in UNITED KINGDOM
Suitable for laboratories and general light duty indoor use, this wall mounted indoor emergency safety shower meets the requirements of the European Standard EN 15154 for plumbed in laboratory showers. Powder coated 316L stainless steel pipework ensures resistance to corrosive and flammable liquids whilst also being easy to clean. Ideal for use where space is at a premium. Shower rose designed ...
-
Manufactured by Thermo Fisher Scientificbased in USA
Protect samples with the Thermo Scientific™ Heraguard™ ECO Clean Bench, which features optimal efficiency, safety and functionality. Available with dual DC motors for low energy ...
-
Manufactured by Hughes Safety Showers - A Justrite Group Companybased in UNITED KINGDOM
Wall mounted eye/face wash with powder coated stainless steel bowl. Designed to meet the requirements of the European Standard EN 15154 for Laboratories, this wall mounted eye/face wash is ideal for laboratories, schools and general light duty indoor use. Stainless steel bowl with an easy clean green powder polyester finish. Dust covers protect twin spray nozzles from contaminants and are lifted ...
-
Manufactured by Hughes Safety Showers - A Justrite Group Companybased in UNITED KINGDOM
Table mounted eye/face wash with powder coated stainless steel bowl. Designed to meet the requirements of the European Standard EN 15154 for Laboratories, this table mounted eye/face wash is ideal for laboratories, schools and general light duty indoor use. Stainless steel bowl with an easy clean green powder polyester finish. Dust covers protect twin spray nozzles from contaminants and are ...
-
Manufactured by ProMinent GmbHbased in GERMANY
Measuring range 0 – 1,000 NTU. Turbidity measurements with DULCOTEST DULCO turb C: Compact measuring instrument that uses light scatter to measure turbidity, with a large measuring range and different designs to comply with ISO and EPA standards. Available with or without automatic ...
-
Manufactured by Sigrist-Photometer AGbased in SWITZERLAND
The StackGuard continuously monitors the scatted light intensity of an extracted, withdrawn sample of gas. The laser light source minimized stray light and improves sensitivity to the µg/m³ level, the filtered purge air prevents from window soiling. A calibration check is performed by means of a checking rod. The sample air is led out of the stack, heated up above the dew point and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you