EN Standards Services For Monitoring And Testing Available In South Dakota
-
Manufactured by Atlas Corporation LLCbased in UKRAINE
With our service and products, we satisfy the demands of different industrial segments such as: metallurgy, cement, glass production and chemical industry, etc. We boast vast experience in the production of bridge structures, lifting equipment and related structures, furnaces, industrial air treatment systems including dedusting systems, pressure vessels and boilers, chimneys and ducts. The ...
-
Manufactured by Ultraspin Technology Pty Ltdbased in AUSTRALIA
We test all equipment in our factory prior to delivery. It is a wet facility that can generate oil water mixtures of known oil droplet size in real time. This wet area is used for formal Factory Acceptance Testing (FAT’s) of our equipment. It can also be used for performance testing according to the comprehensive ANSI oily water test protocol standards, and we can test to the free oil ...
-
based in ITALY
In-house facilities allow the Aeronautical Division (in close collaboration with the Measurement Laboratory) to offer electromagnetic measurement services in several application fields (i.e. Antennas, Radomes, ...
-
Manufactured by Sjolund A/Sbased in DENMARK
We weld steel, stainless steel, and aluminum. Welding can be done either manually or automatically and cost efficient on our newest ABB robots - and utilizing the most advanced Fronius welding equipment. If a welding procedure specifications (WPS) is required, we provide such according to the requirements and regulations concerning the job in ...
-
based in IRELAND
Our air emissions monitoring services are accredited to the MCERTs standard and UKAS under scope 2801. We have an extensive range of air emissions monitoring methods, the majority of which are BS EN methods. These are in accordance with the requirements of the Environment Agency, SEPA, Northern Ireland Environment Agency and the Irish EPA. Our personnel are qualified to the MCERTs standard with ...
-
Manufactured by Chesterfield Special Cylinders (CSC) Ltd.based in UNITED KINGDOM
Chesterfield Special Cylinders’ Integrity Management team operates globally to deliver faster, safer and more economic inspection and testing of high-pressure cylinders. It delivers specialist acoustic emission testing services and operates to the BS 8562 and EN 16753 ...
-
Manufactured by Permanent Steel Manufacturing Co.,Ltdbased in CHINA
Permanent Steel Manufacturing Co.,Ltd on a 250,000 m2 area and has three production units: Foundry, Rolling and Extrusion mills. Permanent Steel Manufacturing Co.,Ltd operates under strict quality, environmental, as well as health and safety management systems, in compliance with ISO 9001, ISO 14001 and OHSAS 18001 standards. The wide product range of Permanent Steel Manufacturing Co.,Ltd meets ...
-
by Normec OWSbased in BELGIUM
Biobased carbon testing is a specific method used to determine the amount of carbon in a product that is derived from biomass, as opposed to non-circular and/or fossil origin. While this can be used to gain insight into the natural, renewable resources used in a product, it is no indicator of biodegradability. Biobased carbon is not necessarily biodegradable, just as biodegradable carbon is not ...
-
Manufactured by AtmosAir Solutionsbased in USA
AtmosAir is the recognized leader in solutions for healthier indoor air, helping the world to see what’s possible with better air. We’ve spent nearly two decades turning the invisible into something incredible. AtmosAir's technology is backed by industry peer-reviewed studies, laboratory studies and field testing. Customers, environmental firms, universities and others have tested ...
-
by BOMcheckbased in UNITED KINGDOM
RoHS2 requires Manufacturers to produce technical documentation which demonstrates that their products are RoHS compliant, in line with Module A of Decision 768/2008/EC. This is a significant difference compared to the RoHS1 Directive which does not prescribe any requirements for Manufacturers to maintain compliance documentation. RoHS2 also includes obligations for all EU Member States to ...
-
Manufactured by Industrial Textiles & Plastics Ltd.based in UNITED KINGDOM
Puraflex has been tested to the following EN Chemical Resistance Standards. Note that ASTM D5322 is a widely recognised test method for chemical resistance and it is incorporated within the EPA Method 9090 and ASTM D5747. Both EN 14414 and EN 14415 incorporate the ASTM D5322 test ...
-
Manufactured by Leobersdorfer Maschinenfabrik GmbHbased in AUSTRIA
Sophisticated Engineering: At LMF the most up-to-date engineering aids are used to ensure complete customer satisfaction with regard to optimized selection of mate-rials, calculation, design, engineering and manufacturing. These aids comprise a modern data bank based CAE system as well as recognized quality assurance program workflow. Specific consideration is given to the technical documentation ...
-
based in HUNGARY
Odour management, prevention and reduction is important for all waste treatment plants. It is often a big problem for the operators of these plants, because: odour often cause problems with neighbours in plant management; odour is difficult to characterize, it is a mixture of many compounds; odour treshold concentration is often very low; no single chemical has been identified as a good ...
-
Manufactured by Viscotherm AGbased in SWITZERLAND
Potentially Explosive Atmospheres exist where there is a risk of explosion due to mixtures of gas/air, vapour/air, dust/air or other flammable combinations. In such areas there is a necessity to eliminate sources of ignition such as sparks, hot surfaces or static electricity which may ignite these mixtures. Where electrical equipment has to be used in these areas it must be so designed and ...
-
based in SPAIN
This certifies that the Quality Management System of a company complies with the UNE-EN ISO 9000 standards. Any organisation can obtain an AENOR certification for its quality management system, regardless of its size or business ...
-
based in SLOVAKIA
Environmental audit provides client with information how the environmental matters are managed and addressed throughout an audited organisation. ENVIGEO has experienced stuff in many areas of work. This provides our clients with a wide range of experience and depth of knowledge, enabling risks to be systematically identified, qualified and ...
-
Manufactured by Metlab Miljö ABbased in SWEDEN
Calibration measurements according to EN 14181 for gas analysis systems and EN 13284-2 are carried out as parallel measurement during three days each third (waste incineration plants) or each fifth year (Large combustion plants). Simplified calibration measurements can for other applications often be carried out during one ...
-
by Adiquimicabased in SPAIN
We carry out analyses and customized actions to verify and validate indoor air quality of buildings to comply with the current regulations. ...
-
based in GERMANY
With over 50 years experience in plastics as part of the Feddersen Group, we offer customer-focused service, consultation services and a professional sales and distribution network. We are specialists in biodegradable and biobased plastics and offer a broad portfolio of biodegradable and biobased compounds. We can access the entire bioplastics market with our global purchasing ...
-
by Normec OWSbased in BELGIUM
Different kinds of man-made material can end up in soil either through unintended or intended use. Mulch film, plant pots, fertilizer coating, and body bags, for example, are purposeful products for which biodegradability offers big benefits. Normec OWS offers different types of soil degradation testing to determine the (bio)degradation, chemical characteristics, and ecotoxicity of materials in ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you