air analysis Equipment available in Mauritania

Available in Mauritania| Near Mauritania
33 Results found

We couldn't find any air analysis equipment in Mauritania

Here is a list of results available in Mauritania

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Monitoring & Testing ×

  • Subcategory: Environmental Analysis ×

  • Keyword: air analysis ×

  • Available in: Africa ×

  • Available in: Mauritania ×

Gasmet - Model DX4015 - Portable FTIR Gas Analyzer for Ambient Air Analysis

by Gasmet Technologies Oy     based in Helsinki, FINLAND

DX4015 is a portable FTIR gas analyzer for ambient air analysis. The key features of the DX4015 include a high sensitivity sample cell for lowest possible detection limits and a built-in-pump, which means that there is no need to use a separate sampling system.

ParticleTrack - Model G400 - Optimize Particle and Droplet Processes in Laboratory R&D

by Mettler - Toledo Int. Inc     based in Greifensee, SWITZERLAND

ParticleTrack G400 with FBRM Technology is designed for laboratory research and development, facilitating better understanding and faster optimization of particle and droplet processes such as: Crystallization, Wet Milling, Homogenization of Suspensions and Emulsions.

Zefon - Model Air-O-Cell CSI - Universal Optical and SEM Particle Analysis

by Zefon International, Inc.     based in Ocala, FLORIDA (USA)

Air-O-Cell CSI Provides Universal Optical and SEM particle analysis. Bringing the advantages and precision of SEM particle analysis to indoor air quality investigations.

contec - Adsorption Filter Housings for Air and Gas Re-Conditioning

by contec GmbH Industrieausrüstungen     based in Bad Honnef, GERMANY

Application: Requirements appropriate conditioning of analysis and reference gases.

contec - Adsorption Sorbents and Catalysts for Air and Gas Filtration

by contec GmbH Industrieausrüstungen     based in Bad Honnef, GERMANY

Application: Requirements appropriate conditioning of analysis and reference gases and removal of interfering fractions.

Copley Scientific - Model 100-S4 - 3-Stage Impactor

by Copley Scientific     based in Colwick, UNITED KINGDOM

Airborne particles entrained in the air are a complex mix of varying sizes and chemical composition, some of which can be hazardous to health. Some examples are more common than others ie asbestosis, silicosis, etc.

Copley Scientific - Model 140 - 8-Stage Andersen Impactors

by Copley Scientific     based in Colwick, UNITED KINGDOM

The potential health hazards associated with exposure to fine particles have long been recognised and led to the development of the Andersen Cascade Impactor, which has evolved over a number of years.

Thermo Scientific - Model ChemComb™ 3500 - Speciation Collection Cartridge

by Thermo Scientific - LC/MS GC GC/MS     based in MASSACHUSETTS (USA)

Collect gases and particulate matter for laboratory analysis with the Thermo Scientific™ ChemComb 3500 Speciation Collection Cartridge. This flexible sampling device is made up of a single cartridge, which contains a well-characterized inlet with a PM-2.5 or PM-10 impactor; up to two honeycomb denuders for the removal or collection of ...

Copley Scientific - Model 150/160 - 5-Stage Marple-Miller Impactor

by Copley Scientific     based in Colwick, UNITED KINGDOM

Originally designed for the size distribution analysis of pharmaceutical inhalers, the Marple-Miller Impactor Model 160 is a 5-stage cascade impactor, which has subsequently been used in a wide range of applications (eg the aerodynamic sizing of oil mist and soot particles from crankcase blowby of diesel engines).

Thermo Scientific - Model Partisol™ 2300 - Speciation Sampler

by Thermo Scientific - LC/MS GC GC/MS     based in MASSACHUSETTS (USA)

Characterize particles and gases contained in ambient air with Thermo Scientific™ Partisol™ 2300 Speciation Sampler. This flexible sampling platform contains the same user interface and is built upon the same hardware platform as the popular Partisol Model 2025 Sequential Air Sampler and allows two size fractions to be sampled ...

Aquakem - Model 200 Series - Photometric Analyzer

by Thermo Fisher Scientific     based in Waltham, MASSACHUSETTS (USA)

Ease-of-use combined with minimal operating condition requirements makes the Thermo Scientific™ Aquakem™ 200 Photometric Analyzer the right choice for every cost-efficient lab. This compact, discrete photometric analyzer for water and environmental samples is a fast, fully automated analyzer capable of self optimization of the ...

MKS MultiGas - Model 2030 CEM - Gas Analyzer for Continuous Emissions Monitoring

by Apex Instruments, Inc.     based in Fuquay-Varina, NORTH CAROLINA (USA)

MultiGas 2030 CEM is an FTIR-based gas analyzer designed for continuous monitoring of emissions in effluent streams containing up to 40% of water. Permanently stored calibration spectra reduces the need for costly reference gas mixtures.

Model D8 Quest - The Standard for Quality in Single Crystal X-ray Diffraction

by Bruker Corporation     based in Billerica, MASSACHUSETTS (USA)

The D8 QUEST is a compact solution designed for single wavelength experiments that feature the revolutionary PHOTON 100 CMOS detector. The systems offer high experimental flexibility, with good accessibility and sample visibility in a small-foot-print enclosure. Based on the principles of DAVINCI.DESIGN it is engineered with high modularity from ...

ADC BioScientific - Model EGA41 - Bench Top CO2, H2O & O2 Analyser

by ADC BioScientific Ltd     based in Hoddesdon, UNITED KINGDOM

ADC is pleased to launch the EGA41. The affordable, bench-top, triple gas analyser with integral data logging to SD memory card.This flexible unit provides accurate CO2 analysis using infra red gas analyser, O2 analysis by electro-galvanic fuel cell and H2O by precision laser trimmed sensor.

Zefon International - Air-O-Cell CSI

by Zefon International, Inc.     based in Ocala, FLORIDA (USA)

The Air-O-Cell Collector for SEM Identification (CSI) lets you perform optical, scanning electron microscopy (SEM) and elemental x-ray analysis on the exact same air sample. With the Air-O-Cell CSI a sample can be examined and re-examined by optical and SEM in any order without significant particle loss or complex preparation. Like never before, ...

Hosokawa - Micron Air Jet Sieve

by Hosokawa Micron Powder Systems     based in Summit, NEW JERSEY (USA)

The Hosokawa Micron Air Jet Sieve utilizes the pneumatic sieving principle that enhances the accuracy and reproducibility of particle size analysis. Use of this device has become a preferred method for such tasks as quality assurance of incoming raw materials and the confirmation of final product specifications. While negative pressure draws all ...

Kelvion - Evaporative Air Coolers

by Kelvion Holding GmbH     based in Bochum, GERMANY

Evaporative air coolers combine the advantages of pure air coolers (dry coolers) with the benefits of conventional wet cooling systems. Heat is dissipated by a finned tube system by convection and by evaporation.

Metrohm, Rancimat - Model 743 - Oxidative Stability Analysis of Natural Fats and Oils

by Metrohm USA Inc.     based in Riverview, FLORIDA (USA)

Bringing flexibility to the oxidative stability analysis of natural fats and oils: The 743 Rancimat is a modern, easy-to-use, computer-controlled instrument for oxidative stability analysis of fats, oils and other rendered products, including biodiesel. With 8 sample positions, 2 separate heating blocks and a software solution for controlling ...

MIDAC - Model Titan-OL - Turnkey, Process-Ready Gas Analysis System

by MIDAC Corporation     based in Westfield, MASSACHUSETTS (USA)

The Titan-OL is a turnkey, process-ready gas analysis system. The analyzer and sample handling hardware can be wall or frame mounted in a NEMA enclosure suitable for use in production environments, including Class I, Div. 1. The integrated sampling system is fully purgeable and can handle multiple sample and reference lines. The Titan-OL is ...

Ahlstrom ReliaDisc - Membrane Filters

by Ahlstrom Filtration     based in Tampere, FINLAND

Ahlstrom offers membrane filters with a wide variety of polymers, pore sizes and diameters for diverse applications including: particle retention and collection, sterile filtration of solutions, microbiological applications for cell growth and colony counting, particulate analysis, air monitoring applications, microbiological analysis of potable ...

Need help finding the right suppliers?

Let the XPRTs do the work for you