Ion-Selective (Environmental Analysis) Equipment
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The 2035 Process Analyzer for Potentiometric Titration and Ion-Selective Measurements performs analyses with dedicated electrodes and titrants. Additionally, this version of the 2035 Process Analyzer is also suitable for Ion-Selective Analysis using Metrohm high performance electrodes. This accurate standard addition technique is ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The 2035 Process Analyzer for Potentiometric Titration and Ion-Selective Measurements performs analyses with dedicated electrodes and titrants. Additionally, this version of the 2035 Process Analyzer is also suitable for Ion-Selective Analysis using Metrohm high performance electrodes. This accurate standard addition technique is ...
-
Manufactured by EDT directIONbased in UNITED KINGDOM
EDT directION produce a wide range of stock standards to ensure that ISE calibration is both simple, accurate saving valuable time in a busy laboratory. All of our stock standards are 1000ppm and are supplied in 500ml leak proof bottles. It is anticipated that the end user will prepare standard sets by serial dilution of this stock standard as required. Please ensure that lower concentration ...
-
Manufactured by Pronova Analysentechnik GmbH & Co. KGbased in GERMANY
The bromide selective electrode is a solid state membrane electrode. The membrane consists of a robust highly compressed AgBr/Ag2S sensor element embedded in a plastic shaft by means of a special resin. A silver contact layer is used for potential ...
-
Manufactured by Pronova Analysentechnik GmbH & Co. KGbased in GERMANY
The ammonium selective electrode is a matrix membrane electrode with a fluid contact. The flexible ammonium selective membrane is made from a special ion exchanger who is dissolved in an organic solvent and embedded into a PVC ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The 2035 Process Analyzer for Potentiometric Titration and Ion-Selective Measurements performs analyses with dedicated electrodes and titrants. Additionally, this version of the 2035 Process Analyzer is also suitable for Ion-Selective Analysis using Metrohm high performance electrodes. This accurate standard addition technique is ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Plug and Analyze series of online analyzers come complete, preconfigured, and programmed for their specific applications. Simply connect the power, sample, and reagent lines and the units are up and running producing reliable results. The analyzers can be used for monitoring a variety of components in water, such as silica, phosphate, ammonia, nitrate, zinc, and copper, to name but a ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
Interfacing Metrohm ion chromatographs with sophisticated sampling systems on the one hand (PILS, MARGA, and CIC) and/or universal, highly sensitive detection systems (IC-MS, IC-ICP/MS) on the other greatly extends the scope of ion ...
-
Manufactured by Sea-Bird Scientific - Veraltobased in USA
The SeaFET Ocean pH sensor is an ion selective field effect transistor (ISFET) type sensor for accurate long-term pH measurements in salt ...
-
based in USA
Identify, quantify and confirm more compounds rapidly and with confidence using the Thermo Scientific Q Exactive Hybrid Quadrupole-Orbitrap Mass Spectrometer. This benchtop LC-MS/MS system combines quadruple precursor ion selection with high-resolution, accurate-mass (HRAM) Orbitrap detection to deliver exceptional performance and ...
-
Manufactured by Advanced Sensor Technologies, Inc. (ASTI)based in USA
Measurement modules are available for pH, ORP, mV, temperature, ion selective (ISE), dissolved oxygen and conductivity. Scalable 4-20mA analog output is standard for all measurement modules, with optional MODbus digital output available at a nominal surcharge. Precise factory-calibrated linear analog output allows excellent use in ...
-
Manufactured by Syft Technologies Ltdbased in NEW ZEALAND
Selected ion flow tube mass spectrometry (SIFT-MS) is a form of direct mass spectrometry that analyses volatile organic compounds (VOCs) in air with typical detection limits at parts-per-trillion level (by volume: pptv). Real-time, quantitative analysis is achieved by applying precisely controlled soft chemical ionization and eliminating ...
-
based in UNITED KINGDOM
Time-of-flight mass spectrometry (TOF MS) uses the principle that when different ions are imparted with a given energy, the heavier ions will take longer to travel the fixed distance from the ion source to the detector. TOF instruments simultaneously analyse all ions, making them far less wasteful and so more sensitive than ...
-
Manufactured by AB Sciex Pte. Ltdbased in USA
High Throughput Screening for Unknowns Just Got Simple. Screening for unknown compounds in complex samples is difficult, but not finding them can have massive consequences on your results and your lab's reputation. High resolution LC-MS/MS can do the job, but is traditionally hard to implement for daily routine ...
-
Manufactured by Bruker Corporationbased in USA
MALDI-TOF/TOF adds unique capabilities to protein characterization. With speed in mind, we designed the heart of the rapifleX® MALDI Imaging solution to work up to 20 times faster than traditional MALDI-TOF systems, to meet the increasing requirements of tissue imaging or high-throughput primary ...
-
Manufactured by Prodose Ltdbased in UNITED KINGDOM
Instrumentation and controllers are fundamental to our ability to control water treatment processes. It is through the use of reliable and accurate instrumentation that monitors key parameters within the water that we are able to provide information back to the controllers that in turn govern the ...
-
Manufactured by Pollution & Process Monitoring Ltdbased in UNITED KINGDOM
The ProAm Ammonia Monitor is a simple, compact on-line analyser designed currently to accurately determine ammoniacal-nitrogen in real-time. Other parameters which include Nitrate, Chloride and Fluoride may also be configured. The instrument comprises a wall-mount analyser section with an integral sample pump; a controlling processor interfaced by a membrane keyboard and back lit LCD. Electrical ...
-
Manufactured by Physical Electronics, Inc. (PHI)based in USA
PHI’s patented TRIFT mass spectrometer with Parallel Imaging MS/MS provides superior sensitivity, low spectral background, unique ability to image highly topographic surfaces, high mass accuracy and mass resolution, and unambiguous high mass peaks identification with parallel tandem MS imaging capability. The nanoTOF II can be configured with a wide variety of options to optimize ...
-
Distributed by a1-envirosciences GmbHbased in GERMANY
With over 35 years experience in the field of laboratory automation, a1-envirosciences has developed the Ultimate System in Potentiometic Ion Analysis and Through-put for laboratory automation. KAPSAP (Known Addition Potentiometry, Sample Addition Potentiometry) is a fully automated workstation, which offers a unique extension of ...
-
Manufactured by Jensprima Instruments Limitedbased in UNITED KINGDOM
PACON 5000 is a compact, easy-to-operate and high accuracy water qualityanalyzer provided by JENSPRIMA for automatic on-line inspection of water quality residual hardness and quality control of water softening processes. This system controls the selectable limits based on the titration colorimetric principle, providing accurate ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you