laboratory analysis Equipment available in Chad

Available in Chad| Near Chad
97 Results found

We couldn't find any laboratory analysis equipment in Chad

Here is a list of results available in Chad

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Monitoring & Testing ×

  • Subcategory: Environmental Analysis ×

  • Keyword: laboratory analysis ×

  • Available in: Africa ×

  • Available in: Chad ×

ParticleTrack - Model G400 - Optimize Particle and Droplet Processes in Laboratory R&D

by Mettler - Toledo Int. Inc     based in Greifensee, SWITZERLAND

ParticleTrack G400 with FBRM Technology is designed for laboratory research and development, facilitating better understanding and faster optimization of particle and droplet processes such as: Crystallization, Wet Milling, Homogenization of Suspensions and Emulsions.

Model GM65 - Laboratory Analysis Plastic Recycling System

by Gamma Meccanica SpA     based in Bibbiano (RE), ITALY

The laboratory analysis of Gamma Meccanica SpA is a useful service to provide precise and complete answers to the customer. Thanks to the pilot line Gamma Meccanica performs tests on the products supplied by the customers and through laboratory analysis performs searches on materials to verify the quality of the process. In this way the customer ...

Ahlstrom ReliaDisc - Membrane Filters

by Ahlstrom Filtration     based in Tampere, FINLAND

Ahlstrom offers membrane filters with a wide variety of polymers, pore sizes and diameters for diverse applications including: particle retention and collection, sterile filtration of solutions, microbiological applications for cell growth and colony counting, particulate analysis, air monitoring applications, microbiological analysis of potable ...

DIRAC - Model Type 7841 - Room Acoustics Parameters

by Brüel & Kjær Sound & Vibration Measurement A/S     based in Nærum, DENMARK

PC software for measuring a wide range of room acoustical parameters in the field or laboratory according to ISO 3382 (room acoustics), ISO 18233 (analysis methods) and IEC 60268-16 (speech intelligibility).

Salts for Pharmacopoeia Analysis

by Merck Millipore     based in Darmstadt, GERMANY

Merck Millipore offers a wide assortment of inorganic salts designated “for analysis EMSURE® ACS, Reag. Ph Eur”. These premium salts are specified for pharmacopoeia analysis in accordance with ACS as well as Reag. Ph Eur standards, and they fully comply with the relevant authoritative quality guidelines worldwide. Quality control ...

EMSURE - Acids for Pharmacopoeia Analysis

by Merck Millipore     based in Darmstadt, GERMANY

Merck Millipore’s EMSURE acids for pharmacopoeia analysis comply with the relevant authoritative quality guidelines worldwide and are specified in accordance with ACS as well as Reag. Ph Eur standards. Quality control laboratories in the pharmaceutical industry thus benefit from the broad international acceptance of these reagents, the ...

Caustic Alkalis and Bases for Pharmacopoeia Analysis

by Merck Millipore     based in Darmstadt, GERMANY

Caustic alkalis and bases for analysis EMSURE are our premium grade for all regulated and highly demanding lab applications. Merck Millipore’s product range of caustic alkalis for pharmacopoeia analysis includes sodium hydroxide and potassium hydroxide pellets in various purity grades as well as ammonia solution. All these high-quality ...

Model SSM-5000A - TOC Analyzers of Solid Sample Combustion Unit

by Shimadzu Scientific Instruments Inc     based in Columbia, MARYLAND (USA)

Combining the SSM-5000A with a TOC-Vcs/cp analyzer permits analysis of many solid samples in addition to aqueous samples, including soil, sludge, and sediments. Carbon measurement in attached residues using the swab method can be conducted for cleaning validation.

Shimadzu - Model IRAffinity-1S - FTIR Spectrophotometer

by Shimadzu Scientific Instruments Inc     based in Columbia, MARYLAND (USA)

The IRAffinity-1S FTIR spectrophotometer has been designed with teaching and general research laboratories in mind. Despite its compact design, it offers full functionality for all FTIR techniques, including transmission, diffuse reflection, and attenuated total reflection (ATR). The full-sized sample compartment accommodates a wide variety of ...

Calcimeter

by Eijkelkamp Soil & Water     based in Giesbeek, NETHERLANDS

The calcimeter by Eijkelkamp is suitable for the simultaneous determination of the carbonate content in 5 samples. Where possible the vulnerable glass was replaced by synthetic materials. Because hydrochloric acid is used a stable and ergonomic design was chosen. The calcimeter is delivered complete with reaction vessels and test tubes (without ...

Essa - Model XRF - High Pressure, Electro-Hydraulic Actuated Press

by Mineral Stats Inc     based in Lakewood, COLORADO (USA)

Essa Australia manufacture a bench mounted, two piece, high pressure, electro-hydraulic actuated press for laboratory use in the preparation of pressed powder samples for x-ray fluorescence analysis. It is made up as a press unit and a separate 240 volt, single phase, electro-hydraulic power pack. The press unit is designed for free standing on ...

Laboratory Refrigerators

by Tintometer GmbH     based in Dortmund, GERMANY

The German guidelines „Working Safely in Laboratories BG-I 850-0“ stipulates that interior spaces must be explosion-protected where hazardous, explosive atmospheres can develop (for example, due to the presence of flammable liquids).

NT Sensors - Ion Analysis & Kits

by NT Sensors S.L.     based in El Catllar, SPAIN

The incorporation of the nanotechnology in a classic laboratory technique such as the Ion selective electrodes (ISEs) has enabled a new generation of sensors for the ionic analysis. The wide variety of electrodes manufactured by NT Sensors, give the chance for any user to obtain results with the same quality as a laboratory report. Real-time and ...

DEA - Model 288 Epsilon - Dielectric Analyzer

by NETZSCH Group     based in Selb, GERMANY

The multi-functional design of the DEA 288 Epsilon (including furnace or laboratory press) allows for the application of a great variety of different test conditions such as heat, cold, humidity or UV light. This enables the user to easily and conveniently determine the best parameters for processing the material.

Model PAL - Portable Particle Analyzer

by Omnitek BV     based in NETHERLANDS

The Particle Pal is a self-contained system, complete with integral pump and controlled flow rate. Whether on-site or in the laboratory, the Particle Pal will provide cleanliness readings in real time to allow you to fully understand the condition of your oils and fuels. Powerful trending software will allow for data to be displayed in graphical ...

YSI - Model 3200 - Laboratory Conductivity Instrument

by YSI - a Xylem brand     based in Yellow Springs, OHIO (USA)

The YSI is an innovative instrument that offers unmatched accuracy for ultrapure water analysis, multipoint calibration, and a high/low alarm for process applications.

URYXXON - Model 500 - Urine Strip Reader

by Macherey-Nagel GmbH & Co. KG     based in Düren, GERMANY

The URYXXON 500 is an automatic reader for URYXXON Stick 10 urine test strips. With a capacity of 400 strips per hour, it is ideal for use in hospitals and practices. The “easy-to-use-features” allow hygienic operation with hardly any training . The URYXXON 500 provides dependable urine status results to detect early stages of many ...

Easychem - Model 200 - Fully Automated Analyzer

by Systea SpA     based in ANAGNI, ITALY

Fully  automated  analyzer  based  on Direct  Reading  Discrete  Analysis technology, sample capacity from 60 up to 75 positions dedicated  to samples.

Model B-1000POL - Laboratory Polarizing Microscopes

by Optika Srl     based in Ponteranica (BG), ITALY

Laboratory microscope for routine and research applications. Dye-cast frame, with high stability and ergonomy, for transmitted light observation.Version for transmitted polarization analysis. Illumination: X-LED8 (8W power).

SARSTEDT - Model DC 1200 - Automated Decapping

by SARSTEDT AG & Co.     based in Nümbrecht, GERMANY

Automated decapping of all tube diameters from 11–16 mm; Various tube types are opened in a mixed operation. Decapping is carried out in the analysis rack – no reloading required.. Throughput of up to 1,200 tubes per hour . Easy operation. Available for many existing linear racks. Minimises infection risk and overloading.

Need help finding the right suppliers?

Let the XPRTs do the work for you