Particle Sampling (Environmental Analysis) Equipment
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
Discover Eco IC, an ion chromatography system that focuses on the essentials while not compromising on quality, robustness, and reliability. Eco IC has been developed to enable more users to benefit from this technique. Whether you need to perform routine water analysis or you’re looking for an instrument for higher education, Eco IC comes with all the components you need. In addition, you ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
Metrohm Inline Sample Preparation (MISP) puts an end to manual sample preparation for ion chromatography. MISP stands for methods developed by Metrohm that allow you to fully automate the preparation of even the most challenging samples. Not only will you increase sample throughput but also improve accuracy and reproducibility of ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
Combining IC with an electrospray ionization mass spectrometer (ESI-MS) or an inductively coupled plasma mass spectrometer (ICP-MS) solves even complex separation problems while achieving outstanding sensitivities and selectivities. These so-called hyphenated techniques provide valuable information for unambiguous peak identification and are less prone to matrix influences than IC with ...
-
Manufactured by Aerosol Devices Inc.based in USA
A PAL3-LSI Autosampler with a sample plate tray facilitates automated chemical analysis without requiring user extraction or manipulation of the particle sample. The PAL3-LSI Autosampler is configured for common wet chemistry analysis applications including ion chromatography (IC) and high-performance liquid chromatography ...
-
Manufactured by Endecotts Ltdbased in UNITED KINGDOM
Endecotts woven wire mesh sieves are the most widely used test sieves for all types of laboratory sampling and particle size analysis.They are made with only the highest quality materials and are available in diameter sizes of 38, 100, 150, 200, 250, 300, 315, 350, 400 or 450 mm as well as in 3, 8, 12 or 18 inches. Woven wire mesh sieves ...
-
Manufactured by TSI Incorporatedbased in USA
for collecting size-fractionated particle samples in the 0.056 to 10 µm aerodynamic diameter range for gravimetric and/or chemical analyses. The various MOUDI models hold various number of stages, as listed in the table below, the classic MOUDI's hold various impaction stages and cut-sizes. Particle deposits are collected on standard 47-mm ...
-
Manufactured by Focused Photonics Inc. (FPI)based in CHINA
SupNIR-2700 series is infrared analyzing equipment; it uses Holographic digital grating and high sensitivity InGaAs detector (TEC constant temperature cooling). The sample is analysis is based on the diffuse reflection model, and the wavelength range covers 1000-2500 nm. With the help of computer software called RIMP, particles, flakes, ...
-
Manufactured by YSI Incorporated - a Xylem brandbased in USA
. The 1088 supports a number of special functions to address a range of sample conditions and analysis requirements. Onboard magnetic stirring ensures samples containing insoluble components or particles are homogeneous for sampling and accurate analysis. Septum piercing provides closed vial sampling for ...
-
Manufactured by Aerosol Devices Inc.based in USA
The Series 110A Liquid Spot Sampler instrument collects a concentrated suspension of particles into a small liquid-filled vial. The vial is designed with inlet and outlet ports so the user can configure it for on-line batch sampling of the particle suspension directly into a chemical or biological analyzer. A non-ported ...
-
Manufactured by Vibrotechnik LLCbased in RUSSIA
Laboratory sieve S 20/38 consists of a frame, a sieving surface, a connecting element and a shock-absorbing sealing ring. In the place of attachment of the sieving surface and on the upper end of the frame, radial shoulders are made, and in the middle part there is an embossing, which ensures the rigidity of the sieve. Sieve S 20/38 diameter 200 mm, height 38 ...
-
Manufactured by Vibrotechnik LLCbased in RUSSIA
Laboratory sieve S 30/100 consists of a frame, a sieving surface, a connecting element and a shock-absorbing sealing ring. In the place of attachment of the sieving surface and on the upper end of the frame, radial shoulders are made, and in the middle part there is an embossing, which ensures the rigidity of the sieve. Sieve S 30/100 diameter 300 mm, height 100 ...
-
Manufactured by Kurschat GmbHbased in GERMANY
The high-capacity 2-channel-analyser QTOC 201 allows fast and reliable specifictions of soluble and insoluble carbon-impurities of water samples in laboratory as well as in quality insurence. The complete system, which has been on the market for many years, is absolutely ...
-
Manufactured by Vibrotechnik LLCbased in RUSSIA
is tightly attached to the frame. The exclusion of cavities and gaps in which particles of material can accumulate reduces the risk of cross-contamination of samples, improving the quality of the sieve analysis. Sieve S 20/100 diameter 200 mm, height 100 ...
-
Manufactured by Vibrotechnik LLCbased in RUSSIA
Laboratory sieve S 20/50 consists of a frame, a sieving surface, a connecting element and a shock-absorbing sealing ring. In the place of attachment of the sieving surface and on the upper end of the frame, radial shoulders are made, and in the middle part there is an embossing, which ensures the rigidity of the sieve. Sieve S 20/50 diameter 200 mm, height 50 ...
-
Manufactured by Vibrotechnik LLCbased in RUSSIA
Laboratory sieve S 40/70 consists of upper and lower frame, a sieving surface, screws with washers and nuts and a shock-absorbing sealing ring. In the place of attachment of the sieving surface and on the upper end of the frame, radial shoulders are made, which ensure the rigidity of the sieve. Sieve S 40/70 diameter 400 mm, height 70 ...
-
Manufactured by Vibrotechnik LLCbased in RUSSIA
Laboratory sieve S 50/70 consists of upper and lower frame, a sieving surface, screws with washers and nuts and a shock-absorbing sealing ring. In the place of attachment of the sieving surface and on the upper end of the frame, radial shoulders are made, which ensure the rigidity of the sieve. Sieve S 50/70 diameter 500 mm, height 70 ...
-
Manufactured by Vibrotechnik LLCbased in RUSSIA
Laboratory sieve S 40/140 consists of a frame, a sieving surface, a connecting element and a shock-absorbing sealing ring. In the place of attachment of the sieving surface and on the upper end of the frame, radial shoulders are made, which ensures the rigidity of the sieve. Sieve S 40/140 diameter 400 mm, height 140 ...
-
Manufactured by Vibrotechnik LLCbased in RUSSIA
Laboratory sieve S 30/50 consists of a frame, a sieving surface, a connecting element and a shock-absorbing sealing ring. In the place of attachment of the sieving surface and on the upper end of the frame, radial shoulders are made, and in the middle part there is an embossing, which ensures the rigidity of the sieve. Sieve S 30/50 diameter 300 mm, height 50 ...
-
Manufactured by Changsha Mitrcn Instrument Equipment Co.,Ltd (MITR)based in CHINA
The planetary ball mill is suitable for crushing and refining hard, medium hardness, brittleness and fiber materials by wet and dry methods. The fineness of the sample can be less than 100 nanometer. It can also be used for grinding solids in suspensions, sample mixing and homogenization, and metal alloying, etc. Can achieve the ...
-
Manufactured by Jinan Winner Particle Instrument Stock Co., Ltd.based in CHINA
Winner20000B is a Laser Diffraction Particle Size Analyzer working with principle of Mie Scattering Theory to precisely determine the particle size distribution from 0.1μmto 300 μm, with 3 gears of particle size distribution, with high sensitivity ring arrangement of photodetector greatly improve measurement accuracy and repeatability, ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you