Environmental Analysis Equipment For Monitoring And Testing In Europe
-
ShowcaseManufactured by Lumex Instrumentsbased in CANADA
The mercury analyzer RA-915M is a unique all-purpose high sensitivity analytical instrument for measuring mercury, especially for the real time detection of mercury vapor in air, mercury detection in water, natural and stack gases, oil and condensate, solid and sediments, foodstuff and so ...
-
ShowcaseManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
Parallel measuring of up to 4 particle fraction with only one instrument. With the dust analyser EasyPM dust fractions for PM10, PM2.5, PM1 and TSP can be measured parallel with only one ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The APSS-2000 Liquid Particle Counter for USP 788 sizes and counts suspended particulate matter in a wide range of liquids, including parenterals, to meet all current U.S., European and Japanese Pharmacopoeia standards. When it comes to particle monitoring quality control for liquid drug manufacturers, it’s important to meet regulations while minimizing waste. Along with USP 788 for ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
Quality is the difference: Unique application diversity (TS, TC, TX, TOC, TIC, EC, AOC). Low maintenance and low operating costs. Fully automated solids sampler with high sample ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
Sample Processor for the automated analysis of routine samples using 916 Ti-Touch or 915 KF Ti-Touch. Sample Processor with one workstation and one built-in membrane pump for the automatic processing of potentiometric as well as Karl Fischer titrations, in series with small to medium quantities. In addition to the built-in pump, an additional one (membrane or peristaltic) and up to three dosing ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
A gas analyser using flame detection with a catalytic methanator module to analyse CO and CO2 for monitoring gas purity and electronic gas measurement. A 19" inch rack mountable chassis, 4U high. It has the ability to be used as a fully integrated system for automatic sample analysis as well as it is transportable for use at various sites. Our application flexibility allows the chromaCO start up ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The 919 IC Autosampler plus fulfills the requirements of laboratories with medium sample numbers. It enables automation of the full range of Metrohm IC ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
A GC/PID for automatic monitoring of BTEX in air, water and soils. This instrument uses a port valve with a single absorbent trap, and a 30 meter metallic 0.28 mm ID column. Minimum detection level as low as 10 ppt for application Benzene or 1,3-Butadiene in ambient air. Miniaturization, sensitivity, mobility and flexibility are its main features. Everything from the sample port up to the data ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
The high sensitivity instrument for routine ultratrace element detection in clean sample matrices: Ultra sensitive and stable performance for best signal-to-noise ratio. High ion transmission with full sensitivity control on complete mass range. Market leading abundance ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
Capable of anlaysing up to 32 compounds from C6-C12 (used in airmozone) or PAMS. The airmoVOC C6-C12 uses a valve with 1 sample trap. It also features a metalic capillary column. Miniaturization, sensitivity, mobility and flexibility are its main ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
CyBio FeliX extract is the solution for automated nucleic acid extraction in the 96-well format: Pipetting platform, extraction kits, software and consumables form a unit that accelerates your extraction workflow, delivers better results and makes your work ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
Screen-printed and interdigitated electrodes for fast and easy onsite research. We offer a wide range of sensors to meet any research requirements in ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
Fully integrated solution for water content determination with volumetric Karl Fischer titration. OMNIS KF Titration is the high-end volumetric Karl Fischer titrator based on the modular OMNIS platform. With OMNIS KF Titration, determining water in samples has never been more convenient, safer, and ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
Bringing the analytical power of MALDI-TOF-MS to uHTS: MALDI spotting of 1536 samples in less than 10 minutes. Parallel transfers of 96, 384 and 1536 samples with CyBio Well vario. No interferences thanks to intelligent washing routines. Highly homogenous target spots thanks to active sample drying. Highly precise spotting for reliable, automated analysis. Software for process planning, matrix ...
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Gasmet DX4015 is a portable FTIR gas analyzer for ambient air analysis. The key features of the Gasmet DX4015 include a high sensitivity sample cell for the lowest possible detection limits and a built-in-pump, which means that there is no need to use a separate sampling system. The analyzer can be powered with 12 VDC from for example an external battery, so it can easily be used in field ...
-
PremiumManufactured by Gutermann AGbased in SWITZERLAND
A permanently installed leak monitoring system for trunk mains that is both very sensitive (using correlating hydrophone sensors) and at the same time able to work independently for at least 5 years, using solar power for its data gateways. The data is sent to the GUTERMANN CLOUD allowing utilities to pinpoint leaks and investigate them ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The NanoLIBS® LIBS analyzer is a state-of-the-art, handheld instrument for laser-induced breakdown spectroscopy used in rapid identification of solid materials based on elemental analysis. The NanoLIBS provides considerable time savings in materials identification and confirmation, improving compliance with raw material testing directives while at the same time increasing productivity. The ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
Autosampler MMS 5000 made by Analytik Jena for use with the Metrohm Combustion IC for fully automatic analysis of liquid and solid samples. To adapt the modular Multi-Matrix sampler to the correct sample type, either the liquids kit (6.7303.000) of the solids kit (6.7302.000) must be ...
-
PremiumManufactured by Lumex Instrumentsbased in CANADA
Capel-115 is a portable capillary electrophoresis?(CE) system intended for determination of a wide range of analytes in various types of samples, including water, soil, food, and fodders using main modes of separations available in capillary ...
-
PremiumManufactured by Eureka Water Probesbased in USA
Fluorescent dyes like Rhodamine are often added to water systems to provide water discharge and velocity data. Dye tracing studies can provide useful information for modeling surface and groundwater systems in addition to tracing contaminants. Fluorometers allow researchers to measure ultra-low concentrations of dye. The sensors extreme sensitivity and instrument flexibility allows researchers ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you