Only show results in Virginia? Ok

Environmental Lab Equipment Applications

  • Saran Bag application

    Title : Preliminary Sampling Methodology and Analytical Procedures for Ambient Sulfur Hexafluoride, Corporate Author : ARMY MEDICAL ENVIRONMENTAL ENGINEERING RESEARCH UNIT EDGEWOOD ARSENAL MD Personal Author(s) : Luckan,Susan K. ; Cooper,William J. Report Date : JAN 1973 Pagination or Media Count : 23 Abstract : A preliminary evaluation of techniques of sampling and gas chromatographic analysis for low levels of sulfur hexafluoride was conducted to determine the most feasible method for available equipment. Using a Tracor MT-150 gas chromatograph equipped with Nickel 63 electron capture detector and polarized dc voltable, it was possible to detect sulfur hexafluoride at a concentration of 0.06 ppb with a 5A molecular sieve column and nitrogen carrier gas, without preconcentration of the sample. Also, a comparison of glass and Saran sampling materials proved that no detectable loss of the tracer gas resulted with the Saran bags (between 6 ppm and 0.06 ppb SF6

    By Analytical Specialties, Inc. based in Elburn, ILLINOIS (USA).

  • Thermal Remediation in Fractured Rock

    Thermal Conduction Heating (TCH) is applicable in fractured rock and other complex formations such as: Tight and fractured clays,
    Saprolite, Shale, Sandstone, Limestone, Dolomite, Fractured igneous and metamorphic rock, Permeable basalt, Karst limestone.

    By TerraTherm, Inc. based in Gardner, MASSACHUSETTS (USA).

  • Premium

    Analysis of Methylimidazoles in Caramel Colored Carbonated Beverages

    Caramel colorings are used as additives in a broad range of food and beverage products to impart a desired color, but have no nutritional or preservative function. Recently, the potential hazard to humans of ammonia- and ammonia-sulfite-process caramel colorings was raised, because they contain the by-product 4-methylimidazole, which is a potential carcinogen.1 The methylimidazole compounds are difficult to analyze due to their polar nature and low molecular weight. Traditional reversed phase techniques are unsuccessful in retaining these small polar compounds. Therefore, most HPLC methods utilize ion-exchange resins for analysis. Another common method involves GC analysis after the analytes first undergo a derivatization step. The purpose of the work shown in this article was to develop a simple and fast analytical method to determine the levels of 2-methylimidazole and 4-methylimidazole in caramel colored carbonated beverages.

    By Sigma-Aldrich Co., LLC based in Bellefonte, PENNSYLVANIA (USA).

  • Premium

    Measurement solution for fire testing for the railway industry

    A lot of research is carried out in laboratory and on real fires as to the gaseous substances produced in fire effluent. Measurement principles using analytical instrumentation are becoming more widely used in fire testing, due to the quick, real-time nature of the measurements. ISO 19702 is an international standard developed for the use of FTIR analysers in the analysis of gas from fire effluents. Further to this, local test standards such as DIN 5510, applicable to the railway industry, can provide further requirements for gases to be measured.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Premium

    Core Analysis for unconventional reservoirs

    Low field Nuclear Magnetic Resonance (NMR) is routinely used in core analysis laboratories to examine the T2 relaxation time distribution of fluids in core plugs. These distributions can be interpreted to give information on: pore size distributions; permeability; total and effective porosity; free fluid index and bound water volumes. The partnership between Oxford Instruments and Green Imaging Technologies allows us to integrate hardware and software to enable any core analysis laboratory to generate these petrophysical results without the need for in-depth knowledge of NMR.

    By Oxford Instruments plc based in Abingdon, UNITED KINGDOM.

  • Analytical services for site assessment and remediation

    Analytical precision is essential, whether remediation is to abide by regulatory provisions or for development projects. With specific standards in place for each region and situation, Maxxam has developed comprehensive test packages for soil, groundwater, sediments, surface water and soil vapour to meet provincial regulations and/or Canada-wide Standards as set out by the Canadian Council of Ministers of the Environment.

    By Maxxam Analytics based in Mississauga, ONTARIO (CANADA).

  • Premium

    Pure drinking water solutions for laboratories

    For 40 years our water distillers have been used in laboratories throughout the world to produce high-purity distilled water. Not only are our stainless steel systems durable and reliable, but they waste much less water and are less expensive than the other brand of popular laboratory water distillers. Whether your facility is a medical, dental or research laboratory, our water distillers can be configured to meet any grade of water that you need. Simply tell us what grade of water you need to achieve and we will configure the best system to meet your specific needs.

    By Pure & Secure, LLC. based in Lincoln, NEBRASKA (USA).

  • Premium

    Specialty Cleaners and Lubricants for Food & Beverage Industry

    Our precision cleaners provide consistent results with every use and leave surfaces completely clean. They have been proven in cleaning applications ranging from mixing tanks, processing equipment and fluid lines to labware, general maintenance, and filter membrane cleaning. Our products remove protein, starch, fat, gum, oil, grease, and baked on soils. All of our cleaners are NSF registered, USDA-A1 cleaners and can be validated in FDA cleaning processes. Validation methods and health and safety data are available upon request. Our lab will work with you to determine the best cleaner for your application.

    By International Products Corporation based in Burlington, NEW JERSEY (USA).

  • Premium

    Laboratory evaporation for pharmaceutical laboratories

    BUCHI offers a variety of reliable solutions for regulated pharmaceutical laboratories

    By BÜCHI Labortechnik AG based in Postfach, SWITZERLAND.

  • Premium

    International testing for biofuels

    Sustainable use of biofuels requires reliable and precise analytical methods throughout – from the choice of raw materials through to process optimization and on to the compliant final product. As a leading manufacturer of instruments for chemical analysis, we are quite aware of these challenges.

    By Metrohm AG based in Herisau, SWITZERLAND.

  • Premium

    Infrared Sources for Capnography

    Capnography is the monitoring of the concentration or partial pressure of carbon dioxide (CO2) in the respiratory gases. The CO2 concentration during a single breath is measured in a high temporal resolution to monitor the condition of the lungs.

    By Axetris Ag based in Kaegiswil, SWITZERLAND.

  • Premium

    Mass flow devices for analytical instrumentation

    Axetris mass flow devices are used in a variety of analytical applications: Gas Chromatography, Mass Spectrometry, Atomic Spectroscopy, Elemental Analysis, Thermal Analysis, Bioreactor and Fermentor.

    By Axetris Ag based in Kaegiswil, SWITZERLAND.

  • Premium

    Application package raw materials

    Fusion technology is ideal for analysing oxidic materials like minerals or raw materials. It performs with the highest precision possible in xrf sample preparation. However, many laboratories cannot specify exactly what material they have to analyse. Therefore FLUXANA has created a wide range oxidic application program to allow complete analysis of the unknown material. The concentration ranges and elements of interest can be adapted to customer needs. It contains all parts to perform a complete raw material (oxidic materials) calibration with 14 elements for cement, glass, ceramic and raw materials industry. FLUXANA application packages include always the sample preparation method. All packages are running in our application laboratory. You are always free to send your samples for testing free of charge. If you combine our application packages with our sample preparation machines FLUXANA garanties the analytical performance of the package like a contract.

    By Fluxana GmbH Co. KG based in Bedburg-Hau, GERMANY.

  • Premium

    Laboratory Weighing - Interval Weighing

    Simply connect one or multiple balances to the LabX balance PC software, define duration and frequency of your measurements and LabX takes care of automatic data collection. All weighings can be activated from the balance touch screen, executed according to your SOP and recorded automatically. LabX captures all data and stores it in a central SQL-database. From you office, you gain access to all data immediately and enjoy powerful data management functionalities. Data can also be exported manually or automatically to any destination, e.g. to a validated MS Excel spreadsheet or an application software.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Premium

    AutoChem - Process Analytical Technology (PAT)/Quality by Design (QbD)

    Process Analytical Technology (PAT) has been implemented for years, particularly by the chemical industry for the control of chemical processes. More recently, PAT has become a cornerstone of the US Food and Drug Administration’s (US FDA) Quality by Design (QbD) initiative for both the design and control of quality processes. For this reason, the pharmaceutical industry is also active in utilizing PAT tools. PAT tools can be implemented in both the lab and the plant, with laboratory PAT focused more on the design of a quality process and with plant PAT focused on the monitoring and control of the process.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Nitrogen production

    It is used pure or in mixture for various industrial and hospital analyses and quality control

    By ESCO International based in Glan Conwy, UNITED KINGDOM.

  • Filtration systems & solutions for nuclear industry

    Within the nuclear industry there are ongoing operational challenges and potential hazards associated with environmental emissions and the protection of the workforce, such as high temperatures, high radioactivity, high solids loads and chemically aggressive environments. Therefore the industry demands exceptional levels of technical expertise and quality, in conjunction with specific skills to solve many of its most intractable problems.

    By Porvair Filtration Group based in Fareham, UNITED KINGDOM.

  • Premium

    AutoChem - Crystallization

    Understand, Optimize and Control Crystallization From Laboratory to Manufacturing Plant. It is challenging to design a crystallization process that will scale-up to reliably manufacture a consistent product meeting yield, purity and crystal size distribution specifications, and at the same time ensure efficient downstream processing in filtration, drying and product formulation processes.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Premium

    Laboratory Weighing - Dynamic Weighing

    The Dynamic Weighing application allows weighing results to be determined even under adverse conditions. For instance, when determining the weights of animals, weighing on board ship, or on an unstable surface.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you