laboratory automation Equipment

88 Results found
Only show results available in Virginia?
OK
  • Category: Monitoring & Testing ×

  • Subcategory: Environmental Lab Equipment ×

  • Keyword: laboratory automation ×

Model QA Series - Automated Liquid Dispensing

by Mettler - Toledo Int. Inc     based in Greifensee, SWITZERLAND

Upgrade your XP/XPE analytical balance to enable automated dispensing of liquids. Reduce Errors with Perfect Concentration. To prepare a solution the amount of active substance is measured and the exact quantity of  solvent is added to achieve the desired  concentration. Gravimetric liquid addition compensates for any under- or ...

Model QB Series - Automated Powder & Liquid Dispensing

by Mettler - Toledo Int. Inc     based in Greifensee, SWITZERLAND

Quantos Basic Model Powder Dosing (QB5). Reduce Errors with Perfect Concentration preparation. To prepare a solution, powder and liquids are dispensed automatically. Gravimetric sample preparation ensures the highest level of reproducibility; errors are reduced  by up to 60%. Achieve concentrations as low as 0.01 mg/g (according to ...

Model QX Series - Fully Automated Gravimetric Sample Preparation

by Mettler - Toledo Int. Inc     based in Greifensee, SWITZERLAND

The ultimate in high quality batch sample preparation. Reduce Errors with Perfect Concentration. To prepare a solution, powder and liquids are dispensed automatically. Gravimetric sample preparation ensures the highest level of reproducibility; errors are reduced  by up to 60 %.

Quantos - Handheld Powder Dispensing (HPD)

by Mettler - Toledo Int. Inc     based in Greifensee, SWITZERLAND

Increased User Safety: Hazardous substances are fully contained. Aerosol formation and contamination risks are therefore minimized, providing optimal protection for the user.

BÜCHI - Model F-305 / F-308 / F-314 - Recirculating Chiller

by BÜCHI Labortechnik AG     based in Postfach, SWITZERLAND

The Recirculating Chiller F-305 / F-308 / F-314 are specifically designed to work with laboratory equipment such as rotary evaporators, parallel evaporators, Kjeldahl, and extraction products. You benefit from convenient central temperature setting, energy-saving ECO-mode, and automatic start/stop when used in conjunction with the Rotavapor® ...

BÜCHI - Model V-300 - Chemically Resistant PTFE Diaphragm Vacuum Pump

by BÜCHI Labortechnik AG     based in Postfach, SWITZERLAND

The chemically resistant PTFE diaphragm vacuum pump impresses with its very silent and economical operation. With a flow rate of 1.8 m3/h and an ultimate vacuum of 5 mbar, it is optimally suited to be combined with the Rotavapor® R-300.

Robotic Mass Comparators

by Mettler - Toledo Int. Inc     based in Greifensee, SWITZERLAND

Outstanding Performance using Robotic Weight Handling. Efficiency, productivity, and accuracy are key attributes of the a_Line robotic mass comparators. Thanks to the robot and a magazine of up to 100 weights, calibrating weight sets or single weights runs automatically, without manual intervention. Productivity improves and uncertainty ...

Professional level moisture analyzer

by Mettler - Toledo Int. Inc     based in Greifensee, SWITZERLAND

Premium Moisture Analyzer Performance for Best Product Quality. When moisture matters, METTLER TOLEDO Professional Moisture Analyzers deliver outstanding results. Designed and manufactured in Switzerland. Innovative heating and predictive result technology. Best in class.

Model WMC - Ultra-Compact High Precision Weigh Module

by Mettler - Toledo Int. Inc     based in Greifensee, SWITZERLAND

Designed for Automation and Easy Integration. The ultra-compact WMC weigh modules are specifically designed for the use in automated processes under industrial environmental conditions. They are tailored to the needs of machine and equipment manufacturers for simple electrical and mechanical integration. Standardized interfaces allow easy ...

Model WM-Ex - High Precision Weigh Module

by Mettler - Toledo Int. Inc     based in Greifensee, SWITZERLAND

Designed for Automation and Easy Integration. The high speed high accuracy WM-Ex weigh modules are specifically designed for the use in automated processes in hazardous environments (ATEX Zone 1; FM Class I, Div. 1). They are tailored to the needs of machine and equipment manufacturers for simple electrical and mechanical integration. ...

Model WMS - High Precision Weigh Module

by Mettler - Toledo Int. Inc     based in Greifensee, SWITZERLAND

Designed for Automation and Easy Integration. The high speed high accuracy WMS weigh modules are tailored to the needs of machine and equipment manufacturers for simple electrical and mechanical integration. They are designed for the use in automated processes under industrial environmental conditions. Standardized interfaces allow easy ...

Model WXS - High Precision Weigh Modules

by Mettler - Toledo Int. Inc     based in Greifensee, SWITZERLAND

Designed for Automation and Easy Integration. The high speed high accuracy WXS weigh modules are tailored to the needs of machine and equipment manufacturers for simple electrical and mechanical integration. They are designed for the use in automated processes under industrial environmental conditions. Standardized interfaces allow easy ...

Model F-A747 - Filter Robot

by Mettler - Toledo Int. Inc     based in Greifensee, SWITZERLAND

METTLER TOLEDO F-A747 Filter Robot supports the automotive and environmental industry in complying with the increasingly strict worldwide limits for Particulate Matter (PM), especially emitted by diesel engines. F-A747 Filter Robot guarantees cutting-edge filter measurements performance for emission determination down to 0.1 µg in full ...

Model F-A770 - Filter Robot

by Mettler - Toledo Int. Inc     based in Greifensee, SWITZERLAND

METTLER TOLEDO F-A770 Filter Robot supports the automotive and environmental industry in complying with the increasingly strict worldwide limits for Particulate Matter (PM), especially emitted by diesel engines. F-A770 Filter Robot guarantees cutting-edge filter measurements performance for emission determination down to 0.1 µg in full ...

Model MCP Series - Multi-channel pipette calibration workstation

by Mettler - Toledo Int. Inc     based in Greifensee, SWITZERLAND

The MCP series, the multi-channel pipette calibration solutions from METTLER TOLEDO, are fast, flexible and precise – ideal for calibrating multi-channel but also single-channel pipettes. The dedicated calibration software ensures that pipettes are calibrated according to ISO 8655 and makes data handling for all calibrated pipettes easy ...

Mobile Fuel Laboratories

by Grabner Instruments Messtechnik GmbH     based in Wien, AUSTRIA

The MOBILE FUEL LAB is the ideal solution for fast and precise fuel quality checks in the field. Equipped with the portable, rugged and fully automated analyzers of Grabner Instruments, a detailed fuel analysis can be performed in less than 30 minutes by a single person directly on-site.

SARSTEDT - Model DC 1200 - Automated Decapping

by SARSTEDT AG & Co.     based in Nümbrecht, GERMANY

Automated decapping of all tube diameters from 11–16 mm; Various tube types are opened in a mixed operation. Decapping is carried out in the analysis rack – no reloading required.. Throughput of up to 1,200 tubes per hour . Easy operation. Available for many existing linear racks. Minimises infection risk and overloading.

MIKRO - Model 220 - Automated Centrifuges

by Hettich Instruments     based in Beverly, MASSACHUSETTS (USA)

The MIKRO 220 automated centrifuge is an air-cooled, externally controlled microliter centrifuge with PC activation. It centrifuges tubes up to 2.0 mL (e.g. microliter tubes or HPLC tubes) quickly and safely. This qualifies it for sample preparation in research laboratories of the life sciences as well as for daily routine tasks in medical ...

Automated Potentiometric Titrations

by a1-envirotech     based in Blyth, UNITED KINGDOM

The Mitsubishi GT-200 Automatic Titrator is compact and able to perform all types of measurement including pH, potentiometric, conductivity, polarisation, photometric titration. The GT-200 is a hydrocarbon resistant instrument that integrates the control unit and burette into a single unit. A maximum of 12 burettes can be used on the system for ...

Easychem - Model 200 - Fully Automated Analyzer

by Systea SpA     based in ANAGNI, ITALY

Fully  automated  analyzer  based  on Direct  Reading  Discrete  Analysis technology, sample capacity from 60 up to 75 positions dedicated  to samples.

Need help finding the right suppliers?

Let the XPRTs do the work for you