Only show results in Virginia? Ok

Environmental Monitoring Applications

  • Premium

    Monitoring solutions for the marine industry

    While land-based industry has been subject to strenuous emissions regulations over the past decades, air emissions from sea-going ships’ machinery has so far been largely unregulated. As a result, according to EU statistics, ships have become the single biggest source of sulphur dioxide (SO2) within the EU. The US EPA (US Environmental Protection Agency) reports similar findings, i.e., that the proportion of air pollutants released which can be attributed to the shipping industry is increasing. MARPOL Annex VI aims to reduce emissions from ships through international regulations, which hopefully will discourage states from enacting unilateral regulations problematic to the shipping industry.

    By Codel International Ltd based in Bakewell, UNITED KINGDOM.

  • Premium

    Parallel evaporation in environmental consultancy

    For a fast and effcient sample concentration in order to monitor de pollution of the environment

    By B√úCHI Labortechnik AG based in Postfach, SWITZERLAND.

  • Premium

    Weather monitoring for environmental compliance

    By Delta-T Devices Ltd. based in Cambridge, UNITED KINGDOM.

  • Premium

    Measuring aromatic hydrocarbons (BTEX) for pollution control and environmental monitoring

    The Series 8900 BTEX Analyzer provides direct measurement of Benzene, Toluene, Ethylbenzene, and Xylenes in ambient air. This instrument is utilized in ambient air networks around metropolitan areas and fence-line monitoring at industrial sites. The Series 8900 BTEX Analyzer employs a photoionization detector (PID) as the sensing element. This detector is specific to volatile organic compounds. The Benzene, Toluene, Ethylbenzene, and Xylene`s in the gas sample are physically separated using proprietary GC columns.

    By AMETEK MOCON - Baseline based in Lyons, COLORADO (USA).

  • Premium

    Measurement of methane and non-methane hydrocarbons for environmental air quality.

    The Model 8900 Methane/Non-Methane Analyzer provides direct measurement of Methane and Non-Methane Hydrocarbons. This instrument is utilized in ambient air monitoring networks around metropolitan areas, fence-line monitoring at industrial plants and hazardous waste sites, and in the production of high purity industrial gases. Methane is a naturally occurring gas generated from the decomposition of biological materials and industrial activity. Since Methane is not considered a pollutant it is the Non-Methane hydrocarbons that are of primary concern.

    By AMETEK MOCON - Baseline based in Lyons, COLORADO (USA).

  • Premium

    Environmental Water Analysis

    Now for the first time you can measure ion levels in drinking / tap water, rivers and lakes using one probe and one set of calibration solutions. We have probes specially tailored for environmental testing. Our Environmental probes measure Chloride, Ammonium and Nitrogen or we have a total nitrogen probe measuring Ammonium and Nitrogen. Each probe can be calibrated in our unique calibration solutions allowing you to calibrate all sensors simultaneously and take measurements in drinking or river water. Probes are also available in our standard four or six ion combinations and can be custom packaged upon request.

    By CleanGrow based in Vacaville, CALIFORNIA (USA).

  • Premium

    Ambient air quality monitoring solutions for tunnel monitoring

    Car tunnels need ventilation in order to keep air pollution below the limits. When the pollution levels reaches a setpoint, the fans must be started and kept running until the pollution levels decreases.

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    Machine condition monitoring for trucking fleet

    Overview

    Over-the-road trucking fleets depend on their vehicles for their business and revenue. Vehicle availability is critical and unexpected breakdowns can be costly – not only due to the cost of the repair but towing charges of a large truck and the lost revenue can add up to an expensive event.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Thin-film Measurement Technology for Appliance Industry

    Measurement and control is an essential element in the success of products in the consumer appliance industry. Precise temperature measurement in cooking equipment along with flow control in cleaning equipment are crucial to the proper functioning of different appliances. IST’s thin film platinum temperature sensors are ideal for the long term precise measurements required by many of these devices. They are also capable of measuring extremely high temperatures at which some appliances operate. IST’s flow sensors, with the ability to measure pressure differential and flow direction, are more than capable of meeting the needs of products in the appliance industry.

    By Innovative Sensor Technology (IST) based in Las Vegas, NEVADA (USA).

  • Premium

    Environmental Monitoring for the Energy Industry

    By Optical Scientific Inc. (OSi) based in Gaithersburg, MARYLAND (USA).

  • Premium

    Meteorological sensors for meteorology

    Sustainability is a often-used word. But building environmental monitoring networks is complicated and expensive. When planning, therefore, it is important to consider the sustainability - means service life of the entire system. And since this typically should be more than 10 years, the system must allow permanent modernization and improvements.

    By G. Lufft Mess- und Regeltechnik GmbH based in Fellbach, GERMANY.

  • Premium

    Machine condition monitoring for municipalities

    Overview

    Cities and towns are often responsible for maintaining critical assets such as water and wastewater treatment facilities and power generation plants. Oil analysis on this critical equipment as part of a robust maintenance program is a very cost effective way of failure avoidance. Additionally, greater emphasis on environmental conservation and a focus on delivering critical services while operating under reduced budgets leads municipalities to activate these programs. Spectro oil analysis solutions are used by many municipalities to monitor treatment plant gearboxes and backup diesel generators, and avoid costly lubrication mixups.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Process instrumentation and analytics solutions for environmental monitoring industry

    From monitoring impurities in vents, stacks, air or water to point source or area monitoring, automatic and on-line measurement is an important tool. This type of measurement will detect, quantify and assist in reducing emissions. Siemens analytical products are utilized for many of these measurements.

    By Siemens Industry, Inc. - Process Analytics based in Houston, TEXAS (USA).

  • Premium

    EDXRF spectrometers for environmental applications

    Air pollution, soils, grounds and wastewater

    Xenemetrix Energy Dispersive X-ray Fluorescence (ED-XRF) spectrometers bring expanded capabilities to environmental monitoring through the combination of proven detection methods with innovative technologies, including regulatory monitoring for compliance and research.

    By Xenemetrix Ltd. based in Migdal Haemek, ISRAEL.

  • Premium

    EDXRF spectrometers for educational industry

    Analytical Chemistry study with Xenemetrix ED-XRF

    Modern research deals with the development of new forms of diagnostic technologies for different purposes, such as solutions for laboratory needs, devices and methods that deliver accurate and reliable results at a very high level of productivity.

    By Xenemetrix Ltd. based in Migdal Haemek, ISRAEL.

  • Premium

    Hydrological monitoring

    By Stevens Water Monitoring Systems, Inc. based in Portland, OREGON (USA).

  • Premium

    Product stewardship

    The WERCS software suite provides more than just SDS authoring software. We provide tools, technology and services to improve your business processes and advance product stewardship. Through our regulatory compliance software, organizations gain efficiencies at multiple levels. Our SARA and VOC/HAPs reporting modules help to streamline environmental monitoring requirements. Raw material and new product introductions are streamlined through our chemical approval process module. We execute all facets of SDS management and distribution, including SDS services for suppliers. Our relationship with regulatory content providers ensures you are compliant to global regulations.

    By UL - The WERCS based in Latham, NEW YORK (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you