Environmental Monitoring Equipment For Monitoring And Testing In Bosnia & Herzegovina
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
A rugged, low-cost, standalone temperature sensor range optimised for OEMs, plant designers and process operators. A non-contact infrared thermometer range designed for standalone use, Simply power it up and UNO provides a 4-20mA output linear over its temperature range. UNO delivers precise, drift-free measurements for even the smallest target ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
The GA-360E/F360E Series is a line up of units that provide ultrahigh sensitive, highly accurate, continuous monitoring of trace amounts of impurities contained in gases (N2, O2, He, Ar, H2, and Air) used in the semiconductor manufacturing process. Utilizing a cross-modulation method, GA-360E/F360 Series units have no zero drift due to the simultaneous analysis of the zero gas and ordinary time ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
This conductivity meter measures conductivity, resistivity and salt in water solutions. It is a field type, with a waterproof case, and is easy to hold and move. It enables anyone to conduct high-precision measurement, anytime and anywhere. Naturally it can be used by specialists at research institutions, but it can be also be used in wide range of other feilds relating to equipment management ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
HORIBA’s compact designed Zero Gas Generator ZNV-7 is used for mobile, stationary or laboratory scale zero point checking & diluting span gas sources for the calibration of ambient air ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
The HE-960HI is a wide-range type sanitary electric conductivity meter that can measure over a wide range from manufacturing water up to 500 mS/cm, and enables advanced concentration management through abundant outputs. Cleaning-in-Place (CIP) terminal management and a reduction in cleaning solutions is also achieved through accurate surface detection. And we have developed a lineup of electric ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
The APHA-370 continuously monitors atmospheric THC, NMHC, and CH4 concentrations using a cross-flow modulated selective combustion type method combined with a hydrogen ion detection method. The APHA-370 employs an independent, internal dry-method sampling device to achieve the highest levels of sensitivity and ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
Since this flow-through type sensor has no internal protuberances, fluid flows through the sensor with exactly the same inside diameter as the pipe, thus helping reduce fluid retention and ensuring that CIP chemical fluid is drained completely, which results in higher cleaning performance. The FES-310L Series sanitary conductivity sensors, which are used in conjunction with the HE-960HS ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
The APOA-370 continuously monitors atmospheric ozone concentrations using a cross flow modulated ultraviolet absorption method. The APOA-370 employs an independent, internal dry-method sampling device to achieve the highest levels of sensitivity and accuracy. The dry method, due to its minimal maintenance requirements and capability of continuously monitoring and instantaneously analyzing gases ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
The HE-960CW is ideal for the conductivity control of the purified water, pasteurized water, and water for injection that are used in the production of pharmaceuticals. And we have developed a lineup of electric conductivity sensors that can be used in conjunction, from the conventional insertion type to the flow-through type with improved cleaning and sanitary ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
Laboratory-precise five components gas analysis, anywhere according to DIN EN 15267 - 3, DIN EN 14181. Approved as Standard Reference Method (SRM) for: CO (DIN EN 15058). O2 (DIN EN 14789). NOx (DIN EN ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
Dilution of gases with high accuracy and precision requires high quality mfc’s, especially for high dilution ratios and ranges. Consequently HORIBA’s APMC-370 is equipped with digital mfc’s. These mfc’s are factory calibrated, optional also with a special Polynomial Calibration. HORIBA Europe‘s APMC-370 is designed to calibrate gas analyzers manually, remotely ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
The HORIBA permeation dryer PS-100E is designed as a compact and portable sample gas conditioning system in combination with the multi-component gas analyzer ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
The ESH-01-C-SN conductivity sensor, which is used in conjunction with the HE-960CW conductivity converter, is ideal for controlling conductivity in the purified water, pasteurized water, and water for injection that are used in the production of ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
HORIBA gas samplers are suitable for volume-correct taking of gaseous samples during emission and emission measurements. This device can be used wherever gases and gaseous components must be ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
The continuous online TOC-Analyzer HT-110 is suitable for the measurement ot total organic carbons in Purified Water (PW), Water For Injection (WFI) and Highly Purified Water (HPW). The unit is operating according to USP 643. It is applicable for pharmaceutical and/or semiconductor manufacturing. The measuring principle is based on UV-Oxidation and measurement of the difference in conductivity. ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
Since this flow-through type sensor has no internal protuberances, fluid flows through the sensor with exactly the same inside diameter as the pipe, thus helping reduce fluid retention and ensuring that CIP chemical fluid is drained completely, which results in higher cleaning performance. The FS Series sanitary conductivity sensor, which is used in conjunction with the HE-960CW conductivity ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
HORIBA Europe’s NOx Converter Checker CC-100E has been developed to test the e'ciency of NOx to NO converters, which are used in NOx gas analyzers for stack emission measurements or process gas ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
Every day, wherever we go, we are exposed to minute amounts of environmental radiation. This environmental radiation is emitted continuously, day and night, from various objects and substances in the natural world and our living environment. Most environmental radiation consists of three types: alpha rays (α), beta rays (β) and gamma rays (γ). HORIBA's PA-1000 'Radi' ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
From environmental monitoring to developing new energy sources and chemicals for the new era, gas analysis systems are faced with needs and challenges that have changed dramatically over time. Responding to these new needs, HORIBA has developed the VA-3000, the versatile gas analyzer that's ready for the future. A single analyzer is now capable of measuring a wider selection of gas components ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
The FES-210L Series sanitary conductivity sensors are electric sensors that target sanitation issues by employing a flat structure that keeps dirt from adhering to the tip of the sensor, and they enable continuous, high accuracy measurement in liquids of various concentrations, from purified water to cleaning solutions. The FES-210L Series, which is used in conjunction with the conductivity ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you