Radiello Environmental Sampling Equipment For Monitoring And Testing Available In Kosovo
-
Manufactured by Sigma-Aldrichbased in USA
A polypropylene protective outdoor shelter is available for housing up to four Radiello samplers during outdoor/ambient air sampling. The shelter allows for adequate ventilation while simultaneously protecting the samplers from harsh weather conditions. The shelter can be mounted to a variety of fixtures including lamp posts, traffic lights, and telephone poles of various diameters. The shelter ...
-
Manufactured by Sigma-Aldrichbased in USA
Includes one standard Radiello vertical adapter (RAD122) for each thermometer, configured for standard use, pk of 3. Uptake rates are dependent on temperature; therefore, concentration values obrtained during samplng will be more accurate if precise temperatures are recorded during sampling. Note that temperature variations of up to 4-5 °C can be observed from one area of an urban population ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
Radiello Cartridge Adsorbents for sampling aldehydes, matrix SS net with 2,4-DNPH coated Florisil, pk of ...
-
Manufactured by Sigma-Aldrichbased in USA
The Radiello ready-to-use (rtu) Diffusive Samplers come pre-assembled with the cartridge adsorbent pre-sealed within the diffusive body using a polycarbonate screw-thread cap. To avoid premature sampling, the entire unit (diffusive body plus pre-sealed cartridge adsorbent) is enclosed within an airtight polypropylene (PP) container. Just before use, the unit is removed from the PP container, and ...
-
Manufactured by Sigma-Aldrichbased in USA
Uptake rates are dependent on temperature; therefore, concentration values obrtained during samplng will be more accurate if precise temperatures are recorded during sampling. Note that temperature variations of up to 4-5 °C can be observed from one area of an urban population to ...
-
Manufactured by Sigma-Aldrichbased in USA
The Radiello ready-to-use (rtu) Diffusive Samplers come pre-assembled with the cartridge adsorbent pre-sealed within the diffusive body using a polycarbonate screw-thread cap. To avoid premature sampling, the entire unit (diffusive body plus pre-sealed cartridge adsorbent) is enclosed within an airtight polypropylene (PP) container. Just before use, the unit is removed from the PP container, and ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
Radiello Replacement Mounting Strips for use with Radiello Outdoor Shelter, pk of 100. Legal Information: Radiello is a registered trademark of Fondazione Salvatore Maugeri ...
-
Manufactured by Sigma-Aldrichbased in USA
Radiello Filtration Kit pk of 20. The filtration kit consists of graduated polyproylene syringe barrels and 13 mm diamater syringe filters with 0.45 μ,m porosity. The filtration kit is ideal for filtering aqueous samples prior to reversed-phase HPLC and ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
Radiello Filtration Kit pk of 20. The filtration kit consists of graduated polyproylene syringe barrels and 13 mm diamater syringe filters with 0.45 μ,m porosity. The filtration kit is ideal for filtering aqueous samples prior to reversed-phase HPLC and ...
-
Manufactured by Sigma-Aldrichbased in USA
The diffusive bodies are designed to house Radiello cartridge adsorbents during sampling. The diffusive bodies are threaded at one end for easy attachment to the Radiello triangular support plate. Unlike most of the cartridge adsorbents, the diffusive bodies are reusable and can be cleaned with a mild detergent between use. The diffusive bodies will collect dust (especially during outdoor ...
-
Manufactured by Sigma-Aldrichbased in USA
Radiello Diffusive Bodies white, configured for general use, pk of 20. ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
Radiello Diffusive Bodies blue, configured for sampling light sensitive compounds, pk of ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
The Radiello ready-to-use (rtu) Diffusive Samplers come pre-assembled with the cartridge adsorbent pre-sealed within the diffusive body using a polycarbonate screw-thread cap. To avoid premature sampling, the entire unit (diffusive body plus pre-sealed cartridge adsorbent) is enclosed within an airtight polypropylene (PP) container. Just before use, the unit is removed from the PP container, and ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
Radiello Empty Storage Tubes polypropylene (with stopper), volume 12 mL, pk of 100. Used for storing Radiello Cartridge Adsorbents before and after diffusive ...
-
Manufactured by Sigma-Aldrichbased in USA
The Radiello ready-to-use (rtu) Diffusive Samplers come pre-assembled with the cartridge adsorbent pre-sealed within the diffusive body using a polycarbonate screw-thread cap. To avoid premature sampling, the entire unit (diffusive body plus pre-sealed cartridge adsorbent) is enclosed within an airtight polypropylene (PP) container. Just before use, the unit is removed from the PP container, and ...
-
Manufactured by Sigma-Aldrichbased in USA
Radiello ready-to-use Diffusive Sampler for sampling BTEX and VOCs (Thermal Desorption), pk of ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
A polypropylene protective outdoor shelter is available for housing up to four Radiello samplers during outdoor/ambient air sampling. The shelter allows for adequate ventilation while simultaneously protecting the samplers from harsh weather conditions. The shelter can be mounted to a variety of fixtures including lamp posts, traffic lights, and telephone poles of various diameters. The shelter ...
-
Manufactured by Sigma-Aldrichbased in USA
Radiello Vertical Adapter non-threaded for ready-to-use samplers, pk of 20. For personal sampling (breathing zone assessment) a vertical adapter is available to position the Radiello diffusive body vertically on the Radiello triangular support ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
Radiello Triangular Support Plate pk of 20. The triangular support plate acts as both a closure and means of suspension for the Radiello diffusive body and cartridge adsorbent during passive air sampling. Each support plate is threaded for easy diffusive body attachment. Each plate includes a clip and transparent adhesive pocket to hold the Radiello barcode ...
-
Manufactured by Merck KGaA, Darmstadt, Germanybased in GERMANY
The Radiello ready-to-use (rtu) Diffusive Samplers come pre-assembled with the cartridge adsorbent pre-sealed within the diffusive body using a polycarbonate screw-thread cap. To avoid premature sampling, the entire unit (diffusive body plus pre-sealed cartridge adsorbent) is enclosed within an airtight polypropylene (PP) container. Just before use, the unit is removed from the PP container, and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you