Air Sampling (Environmental Sampling) Equipment In Quebec
-
Manufactured by Sensidyne Industrial Health and Safetybased in USA
The Gilian® 3500 & 5000 are industry leaders in back-pressure performance, reliability and ease-of-use. These pumps offer flow rates up to 3500 & 5000 cc/min respectively. And thanks to several advanced features, these pumps overcome the main causes of sampling errors – saving you time and money. The air flow display ...
-
Manufactured by Radiation Products Design, Inc. (RPD)based in USA
Air sampling is required by OSHA safety standards. Air sampling must be conducted within an 8 hour accumulated time period. Test results will indicate the lead and cadmium levels an individual is being exposed to. If results indicate levels that exceed OSHA guidelines, action must be taken to lower the lead and/or cadmium levels ...
-
Manufactured by A. P. Buck Inc.based in USA
Range 0.8 to 4.0 LPM - The Buck Libra is a low-cost high-performance personal air sampling pump. It is a “no frills” model designed for sampling of asbestos, lead, and other airborne contaminates. The rugged, compact design features a rechargeable nickel-cadmium battery with available one-hour ...
-
Manufactured by A. P. Buck Inc.based in USA
The Buck LinEair 40 Sample Pump is a 5-35 LPM linear piston air sampling pump with long life motor providing impressive power, compact size, and ultra-quiet operation and low current drain for a wide range of sampling applications. With the LinEair 40 , you can use filters, PUF samplers, sorbent tubes, charcoal cartridges, ...
-
Manufactured by Sensidyne Industrial Health and Safetybased in USA
The Gilian BDX-II is an economical air sampling pump designed specifically for abatement and lead applications. It is a compact and rugged air sampling pump optimized for sample methods between 500 cc/min and 3000 cc/min. The BDX-II is powered by a rechargeable NiCd battery that provides up to 10 hours of ...
-
Manufactured by Sensidyne Industrial Health and Safetybased in USA
The Gilian 5000 is a high-performing personal air sampling pump leading the industry in back-pressure performance, reliability and ease-of-use. The pump offer flow rates up to 5000 cc/min, and thanks to several advanced features, the pump overcome the main causes of sampling errors, saving you time and money. The air flow display ...
-
Manufactured by Sensidyne Industrial Health and Safetybased in USA
Innovation Delivered: The ultimate personal air sampling pump delivering enhanced performance, greater versatility, and superior design and ...
-
Manufactured by A. P. Buck Inc.based in USA
The Buck Libra is a low-cost high-performance personal air sampling pump. It is a “no frills” model designed for sampling of asbestos, lead, and other airborne contaminates. The rugged, compact design features a rechargeable nickel-cadmium battery with available one-hour ...
-
Manufactured by Sensidyne Industrial Health and Safetybased in USA
The LFS-113 is a compact low flow air sampling pump. Designed for flow rates between 1 cc/min and 350 cc/min, the LFS-113 is perfect for very low flow applications sampling with sorbent tubes. Compact size and light weight of this pump allow it to easily fit inside a shirt ...
-
Manufactured by Sensidyne Industrial Health and Safetybased in USA
The Gilibrator-2 System provides users with a convenient and highly automated way to check almost any commercially available air sampling pump for proper air flow function before deployment. The system consists of an electronic Gilibrator-2 Base which is used with any of three sizes of wet bubble cells. These patented interchangeable ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
of two modes of operation, diffusion or sample-draw. In the diffusion mode, up to four RF-IR-ST-24 Refrigerant Sensor/ Transmitters can be daisy-chained to the Monitor and transmit data on an RS-485 communication ...
-
Manufactured by Cole-Parmer - Antylia Scientificbased in USA
The programmable peristaltic sipper pump can be adjusted by the operator to inject a repeatable volume of sample or standard into the chamber of a flow-through cuvette. ...
-
Manufactured by Hoskin Scientific Limitedbased in CANADA
These stainless steel gouge augers with different dimensions consist of a steel auger pipe, a collecting bucket and a stick with a steel handle. The auger pipe is filled by pressing the collecting bucket with your foot. Because of the conical shape of this pipe the sample is easily pushed toward the collecting trough when the next sample is ...
-
based in GERMANY
For a simultaneous measuring of PM , PM and Pm (or TSP) in real-time plus - optionally - rel. humidity, temperature, wind speed, wind direction, precipitation and atm. pressure All data are online to the world wide ...
-
PremiumManufactured by AMS, Inc.based in USA
AMS 6-inches (152mm) Gas Vapor Implant Installation Kit are used for permanent soil gas monitoring, UST monitoring, groundwater sampling, air sparging, vapor extraction monitoring, and as a pressure measurement point in vacuum testing. This kit allows a user to obtain or collect a soil gas sample by positioning or placing a 6” ...
-
PremiumManufactured by ENVEAbased in FRANCE
Designed to automatically sample particulates on filters using a TSP, PM10, PM2.5 or PM1 inlet. PM162M is a sequential automatic sampling device for particulate matter in the ambient air. The particles are sampled at constant flow rate (1 m3/h or 2.3 m3/h) and collected on filters for gravimetric weighing and possible ...
-
PremiumManufactured by AMS, Inc.based in USA
AMS Vapor Implants have double woven stainless steel wire screens with a .0057-in. (0.15mm ...
-
Manufactured by A. P. Buck Inc.based in USA
The Buck Libra™ is a low-cost high-performance personal air sampling pump. It is a “no frills” model designed for sampling of asbestos, lead, and other airborne contaminates. The rugged, compact design features a rechargeable nickel-cadmium battery with available one-hour ...
-
Manufactured by Wildlife Supply Company (WILDCO)based in USA
. The Wash Bucket has 504 micron mesh for sorting samples to the same standards used by the professionals. We include an armored glass thermometer of high accuracy for taking samples of air and water. Even our wide-mouth sample bottles are made of durable polypropylene and are sqaure in shape so they won't tip or ...
-
Manufactured by Lighthouse Worldwide Solutionsbased in USA
ActiveCount25H is a high performance portable active air sampler suitable for use in cleanrooms and aseptic environments. The ActiveCount25H is truly ISO 14698 compliant with a d50 collection efficiency of 1 micron and HEPA filtered exhaust port designed to avoid re-aspiration of sampled ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you