air sampling system Equipment available in Azerbaijan

Available in Azerbaijan| Near Azerbaijan
81 Results found

We couldn't find any air sampling system equipment in Azerbaijan

Here is a list of results available in Azerbaijan

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Monitoring & Testing ×

  • Subcategory: Environmental Sampling ×

  • Keyword: air sampling system ×

  • Available in: Asia & Middle East ×

  • Available in: Azerbaijan ×

HI-Q - Model PM-10 Series - High Volume Air Sampling Systems

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

The EPA Clean Air Act of 1987 established a measuring standard to evaluate and monitor the health effects of thoracic inhaleable particles. The standard was set that in order for an environment to be healthy, in terms of these particles, it must have a concentration of less than 150 mg/m3 of particles with aerodynamic diameters less than 10 ...

HI-Q - Solar Power Air Sampling System Design

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

Since 1973 HI-Q Environmental Products Company's engineering staff has designed and developed hundreds of 'Custom, Turn-Key' Air Sampling Systems. Among these custom units are Complete Solar Powered Air Sampling Systems, which require Low Amp Draw, DC driven vacuum pumps. Let HI-Q's experience work for you.

HI-Q - Model VS23-Series - Continuous Duty, Constant Flow Air Sampling Systems

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

The VS-Series Air Sampling Systems can be either incorporated as the primary vacuum source in air monitoring instrumentation or used in conjunction with filter holders and filter media for the collection of particulate and/or gaseous constituents. The systems are furnished complete with a shock mounted base motor/pump, carrying handle, heavy duty ...

HI-Q - Model LFRR-25 - Low Flow Oilless Rocking Piston Air Sampling System

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

This Low Flow Air Sampling System has a flow range of 2-25 LPM. It consists of a 13 pound, 1/8 hp, Oilless Rocking Piston Pump, TMV needle control valve (for flow rate adjustment/measurement), brass interconnect piping, and 1/4' hose barb (Quick Disconnect Optional).

HI-Q - 7-Day Electronic Timer - High Volume Air Sampling System Options

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

7-Day Electronic Timer; 24 hours x 7 days programming. 16 program steps and cycle operation. Two independent 15 A control circuits. Manual override switch for each output. Easy-to-read, large, 0.5 inch high LCD display. Wide operating voltage range. 10-year battery backup for memory protection. Panel and Surface mountable. Protective cover and ...

Crowcon - Air Aspirator Sampling Systems

by Crowcon Detection Instruments Ltd - a Halma company     based in Milton Park, UNITED KINGDOM

Designed for use in Zone 1 or Zone 2 hazardous areas, the air aspirated system uses a compressed air driven vacuum generator to draw a gas sample from a single point. Explosion- proof gas detectors are fitted to monitor for flammable gases, toxic gases or oxygen. Each detector provides a 4-20mA output. An intrinsically safe flow-fail device warns ...

HI-Q - Dry Gas Totaling Meters

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

HI-Q offers a wide range of dry gas totaling meters which, when incorporated in an air sampling system, are an excellent source for recording the total volume of air sampled. The gas-totaling meter may either be connected to have gas supplied through the inlet (connected to the exhaust of a positive displacement pump) or drawn through the outlet ...

HI-Q - Quick Disconnect & Hose Fittings

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

The following Quick Disconnect Couplings and Hose Barbs are for 'RV' Series Holders and Sampling Systems. HI-Q stocks male & female Stainless Steel and Brass Quick Disconnect fittings for all 3/8' fitting combinations.

HI-Q - Custom Mobile Air Sampling & Equipment Carts

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

HI-Q Environmental Products Company's Custom Mobile Air Sampling & Equipment Carts have proven to be industry leaders. From the heavy-duty design of the MRV0523CV-ALPHA used primarily to support ALPHA CAM's, to the telescoping equipment platform of the MSC-PLSTC used primarily for the transport of complete battery operated air sampling ...

IONICON - Nosespace Air Sampling Extension (N.A.S.E.)

by Ionicon Analytik Ges.m.b.H.     based in Innsbruck, AUSTRIA

A heated device for efficient real-time collection of nosespace air samples and introduction into a PTR-MS inlet system. In food, flavor and fragrance science, panelists smell or taste products and a scientist would like to directly measure what the panelist tastes with an quantitative, real-time method such as PTR-MS. For the direct introduction ...

HI-Q - Model CF-1512/24-VBRL - Variable Speed, Brushless DC Air Sampler

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

Due to its low Amp draw, variable speed flow rate control, brushless maintenance free blower and portability, the CF-1512-VBRL is considered to be 'The Ideal External Battery Operated Air Sampler'. The brushless blower used in the CF-1512-VBRL draws a maximum of 3.0 Amps at 6.5 CFM, permitting longer sampling times on a single battery charge. For ...

MCZ - Calibration System for Sampling Probes and Sampling Piping

by Umwelttechnik MCZ GmbH     based in Bad Nauheim, GERMANY

Mobile calibration system as transfer standard to determine the correction values for losses along the sampling path. A gas bag is used to add the known span gas concentration at the sampling of the measuring station. The analysis system can be calibrated to compensate for the losses due to sampling.

Gasmet - Multipoint Sampling System (MSS)

by Gasmet Technologies Oy     based in Helsinki, FINLAND

The MSS is designed for continuous monitoring of multiple measuring points. It’s designed to work as an integral part of the FCX measuring system. The MSS is used for on-line measurements. It is an ideal tool to measure components of interest in ambient conditions from several measuring points. The sample pump, valves, filter and sample ...

HI-Q - Stack Sampling System Design

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

HI-Q is ready to help with your stack sampling requirements: State and Federal nuclear regulatory agencies require a stack discharge sampling program as part of the licensing process. Radionuclides discharged to the air in the form of particulate and volatile compounds must be assayed. Therefore, nuclear facilities are required to follow standard ...

Gasmet Technologies - Multipoint Sampling System – Heated (MSSH)

by Gasmet Technologies Oy     based in Helsinki, FINLAND

The MSSH is designed for continuous monitoring of multiple measuring points. It is designed to work as an integral part of the CEMS or FCX measuring systems. MSSH unit can be used as sampling system with pump for FCX system or as sample point switching box without pump with CEMS. The MSSH is used for on-line measurements. It is an ideal tool to ...

Sample Conditioning System To Remove Haze in Fuel

by Guided Wave Inc,     based in Rancho Cordova, CALIFORNIA (USA)

Guided Wave has been installing SpectrOn® systems in refineries for measurement of octane and other fuel chemistry measurement for well over a decade. Similarly, our ClearView db® photometers have been installed worldwide to measure fuel color, such as ASTM color in diesel and gas oil.

Remote Optical Sensing Assembly (ROSA)

by Guided Wave Inc,     based in Rancho Cordova, CALIFORNIA (USA)

Capture modeling or validation samples on demand with Guided Wave’s Remote Optical Sensing Assembly -- This compact, closed loop, sample collection system is integrated with a Multipurpose Flow Cell.

Tekran - Model 1110 - Synchronized - Two Port Sampling System

by Tekran Instruments Corporation     based in Knoxville, TENNESSEE (USA)

The Tekran Model 1110 Synchronized Two Port Sampling System gives the Model 2537 Mercury Vapor Analyzer the ability to sample two unique sources. Switching between the two sources is synchronized with the instrument sampling cycle and is fully programmable by the user. This is particularly useful for flux chamber studies to measure inlet and ...

Tekran - Model 1115 - Synchronized Multi-Port Sampling System

by Tekran Instruments Corporation     based in Knoxville, TENNESSEE (USA)

The Tekran Model 1115 Synchronized Multi-Port Sampling System works in a similar fashion to the Model 1110, but the Model 1115 allows sampling of up to eight separate input sources. Switching between the sources is synchronized with the instrument sampling cycle. The number of sampling cycles in each position is programmable by the user. The Model ...

Environnement S.A. - Model Quick Lock™ - Heated Sample Filter System

by Environnement S.A     based in Poissy, FRANCE

Sampling system with heated line, integrated particles filter and backflushed - all self-regulated in temperature. Innovative «Quick Lock ™» heated sample filter system allows for filter changes “on the fly” with no need to cool the sample system.

Related Terms for air sampling system

Need help finding the right suppliers?

Let the XPRTs do the work for you