ambient air sampling Equipment available in Grenada

Available in Grenada| Near Grenada
30 Results found

We couldn't find any ambient air sampling equipment in Grenada

Here is a list of results available in Grenada

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Monitoring & Testing ×

  • Subcategory: Environmental Sampling ×

  • Keyword: ambient air sampling ×

  • Available in: Latin America ×

  • Available in: Grenada ×

Tekran - Model 1110 - Synchronized - Two Port Sampling System

by Tekran Instruments Corporation     based in Knoxville, TENNESSEE (USA)

The Tekran Model 1110 Synchronized Two Port Sampling System gives the Model 2537 Mercury Vapor Analyzer the ability to sample two unique sources. Switching between the two sources is synchronized with the instrument sampling cycle and is fully programmable by the user. This is particularly useful for flux chamber studies to measure inlet and ...

Tekran - Model 1115 - Synchronized Multi-Port Sampling System

by Tekran Instruments Corporation     based in Knoxville, TENNESSEE (USA)

The Tekran Model 1115 Synchronized Multi-Port Sampling System works in a similar fashion to the Model 1110, but the Model 1115 allows sampling of up to eight separate input sources. Switching between the sources is synchronized with the instrument sampling cycle. The number of sampling cycles in each position is programmable by the user. The Model ...

HORIBA - Model APHA-370 - Ambient THC Monitor / Ambient Air Monitor

by HORIBA Europe GmbH     based in Leichlingen, GERMANY

The APHA-370 continuously monitors atmospheric THC, NMHC, and CH4 concentrations using a cross-flow modulated selective combustion type method combined with a hydrogen ion detection method. The APHA-370 employs an independent, internal dry-method sampling device to achieve the highest levels of sensitivity and accuracy.

HORIBA - Model APNA-370 - Ambient NOx Monitor

by HORIBA Europe GmbH     based in Leichlingen, GERMANY

The APNA-370 continuously monitors atmospheric NOX, NO2, and NO concentrations using a cross-flow modulated semi decompression chemiluminescence method. The APNA-370 employs an independent, internal dry-method sampling device to achieve the highest levels of sensitivity and accuracy. The dry method, due to its minimal maintenance requirements and ...

HI-Q - Model PM-10 Series - High Volume Air Sampling Systems

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

The EPA Clean Air Act of 1987 established a measuring standard to evaluate and monitor the health effects of thoracic inhaleable particles. The standard was set that in order for an environment to be healthy, in terms of these particles, it must have a concentration of less than 150 mg/m3 of particles with aerodynamic diameters less than 10 ...

Radiello - Model RAD196 - Outdoor Shelter

by Sigma-Aldrich Co., LLC     based in Bellefonte, PENNSYLVANIA (USA)

A polypropylene protective outdoor shelter is available for housing up to four Radiello samplers during outdoor/ambient air sampling. The shelter allows for adequate ventilation while simultaneously protecting the samplers from harsh weather conditions. The shelter can be mounted to a variety of fixtures including lamp posts, traffic lights, and ...

Gasmet - Multipoint Sampling System (MSS)

by Gasmet Technologies Oy     based in Helsinki, FINLAND

The MSS is designed for continuous monitoring of multiple measuring points. It’s designed to work as an integral part of the FCX measuring system. The MSS is used for on-line measurements. It is an ideal tool to measure components of interest in ambient conditions from several measuring points. The sample pump, valves, filter and sample ...

Sabio - Model 1002/1004 - Heated Sample Manifolds

by Sabio Instruments, a division of Sutron Corporation     based in Georgetown, TEXAS (USA)

Collecting and distributing homogenous ambient air samples for gas analysis is easy with the Sabio Model 1002 and 1004 heated Sample Manifolds. Able to work equally well in dry or humid and salty environments, the manifold is well-suited for collecting reactive air toxic data.

MCZ - Calibration System for Sampling Probes and Sampling Piping

by Umwelttechnik MCZ GmbH     based in Bad Nauheim, GERMANY

Mobile calibration system as transfer standard to determine the correction values for losses along the sampling path. A gas bag is used to add the known span gas concentration at the sampling of the measuring station. The analysis system can be calibrated to compensate for the losses due to sampling.

Copley Scientific - Model NanoMOUDI - Micro-Orifice Uniform Deposit Impactor

by Copley Scientific     based in Colwick, UNITED KINGDOM

The unique aerodynamic design of the MOUDI (Micro-Orifice Uniform Deposit Impactor) family of impactors makes it possible to collect size-fractionated airborne particulate matter over the widest possible range of particle sizes - 10 nm to 18 microns.

Gilian Challenger - Air Flow Calibrator

by Sensidyne     based in St. Petersburg, FLORIDA (USA)

Precise air flow calibration from 1-30 LPM Wide temperature range of -30° to +55° C Displays both actual and standard flow rates Simple operation with no moving parts Truly portable, battery powered calibrator.

GilAir - Model Plus - Personal Air Sampling Pump (1 - 5,000 cc/min)

by Sensidyne     based in St. Petersburg, FLORIDA (USA)

Innovation Delivered: The ultimate personal air sampling pump delivering enhanced performance, greater versatility, and superior design and comfort.

AirCon - Model 2 - Air Sampling Pump for Area Sampling Applications

by Sensidyne     based in St. Petersburg, FLORIDA (USA)

A powerful 2-30 LPM constant flow sampler offering full portability and programmability

Gilian - Model 3500 - 3.5LPM, 5000 - 5LPM - Air Sampling Pumps

by Sensidyne     based in St. Petersburg, FLORIDA (USA)

The Gilian® 3500 & 5000 are industry leaders in back-pressure performance, reliability and ease-of-use. These pumps offer flow rates up to 3500 & 5000 cc/min respectively. And thanks to several advanced features, these pumps overcome the main causes of sampling errors – saving you time and money. The air flow display holds ...

tetraCal and tetraCal - Ultra Calibrators for Air Samplers

by Keika Ventures, LLC (KV)     based in Chapel Hill, NORTH CAROLINA (USA)

Designed to go anyplace, indoors or out. From the top a 15,000 ft mountain to a 55° C desert or a -30° C snow field. Our primary element Venturi calibrators will operate for 20 continuous hours on 4 AA cells. We are pulsation free, accurate to less than 1.0% of the flow rate reading, NIST traceable and designed, built and calibrated in our ...

Scentroid - Model DR300 - SAMPLING DRONE

by Scentroid, a Division of IDES Canada.     based in Markham, ONTARIO (CANADA)

Scentroid DR300 Sampling drone adds a new dimension to air sampling. The DR300 Sampling drone can be used to sample ambient air at heights of up to 125 meters above ground level or directly sample from stack plumes. Height sampling and direct plume sampling opens a new avenue that can be used to increase accuracy of emission and impact ...

Scentroid - Model SB 10 - Vacuum Chambers

by Scentroid, a Division of IDES Canada.     based in Markham, ONTARIO (CANADA)

The Scentroid Vacuum Chambers are easy to use, portable, and cost-effective air sample collection devices. The chamber comes in multiple sizes to fit bags of up to 10L, 25L, and even 50L. A built in rechargeable vacuum pump, creates a vacuum inside the chamber. The vacuum around the air sample bag forces the air sample to enter the collection bag ...

WaterSam - Model WS 312 - Compact Stationary Water Sampler

by WaterSam GmbH & Co. KG     based in Balingen, GERMANY

The WS 312 is a stationary water sampler which puts WaterSam quality, performance and reliability into a compact and economical package. Designed for both indoor and outdoor use, the WS 312 features robust stainless steel construction throughout and a climate-control system which keeps samples at the optimal temperature, even in ambient conditions ...

WaterSam - Model WS 316 - Stationary Water Sampler

by WaterSam GmbH & Co. KG     based in Balingen, GERMANY

The WS 316 is the comprehensive stationary water sampler from WaterSam, which offers the largest sample storage capacity and the widest array of options and equipment for specialized applications. The WS 316 is also manufactured with a robust, insulated stainless steel cabinet. The controller-monitored climate control system ensures that samples ...

Dekati - Model FPS - Fine Particle Sampler

by Dekati Ltd.     based in Kangasala, FINLAND

Dekati® Fine Particle Sampler is a guaranteed solution for diluting and conditioning aerosol and gaseous samples for measurement instruments. This versatile dilution system allows dilution factor adjustment between 1:20 and 1:200 and first stage dilution temperature settings between 0 and 350 °C. Temperatures and pressures in different parts of ...

Related Terms for ambient air sampling

Need help finding the right suppliers?

Let the XPRTs do the work for you