We couldn't find any dust sampling equipment suppliers or service providers located in Andorra

Here is a list of equipment results with suppliers serving Andorra

Dust Sampling (Environmental Sampling) equipment available in Andorra

  • Dust / Dust Sampling System

    This manual system can continuously sample dust from a gas duct under isokinetic conditions. This means that a representative sample of the flow in the chimney can be obtained at the sampling point. Particles are collected on heated filtration media.

    By CleanAir Europe based in La Penne-sur-Huveaune, FRANCE. from Isokinetic Sampling Train Product line

  • Premium

    Casella - Dust Detective

    The Dust Detective is ideal for site operators and managers who have a requirement for area monitoring. The Dust Detective can be easily deployed in a workshop or outside area to gather data over time which can be downloaded for evaluation and reporting purposes.

    By Casella based in Kempston, UNITED KINGDOM. from Air Sampling - Area and Site Monitoring Product line

  • Premium

    Casella - Model TUFF - Personal Sampling Pumps

    The TUFF range of personal sampling pumps have a model to suit your application and price.  The TUFF personal sampling pump is Intrinsically Safe which means it can be used in the harshest of environments.

    By Casella based in Kempston, UNITED KINGDOM. from Air Sampling - Personal Sampling Pumps Product line

  • Premium

    JCT - Model JHAF - Heated Filter integrated in Heated JCT-Sample Lines

    Applications: For easy extractive mobile gas analysis. For gas sampling in dusty and humid processes. For removal of dust from the sample gas. In combination with portable analysers. For protection of the analyser and to prevent measurement faults.

    By JCT Analysentechnik GmbH based in Wiener Neustadt, AUSTRIA. from Sample Gas Lines Product line

  • Premium

    JCT - Model JBF-301L - Heated Sample Gas Filter

    Applications: For extractive gas analysis. For emission and process monitoring. For hot filtration of sample gases. For removal of dust and contamination from sample gas. For protection of the analysers.

    By JCT Analysentechnik GmbH based in Wiener Neustadt, AUSTRIA. from Sample Gas Conditioning Product line

  • Premium

    JCT - Model JAF-1 - Liquid Stop

    Applications: For extractive gas analysis. For emission and process monitoring. For analyser protection. Reliable prevention of liquid breakthrough to the analyser. For installation upstream gas analysers.

    By JCT Analysentechnik GmbH based in Wiener Neustadt, AUSTRIA. from Sample Gas Conditioning Product line

  • Premium

    JCT - Model JCL-301 - Compact Gas Conditioning System

    Applications: For extractive gas analysis. For emission and process monitoring. Continuous sample gas conditioning of humid process gases. Continuous drying of sample gas to a precise low and constant outlet dew point. Minimises water vapour cross sensitivities and volumetric errors.

    By JCT Analysentechnik GmbH based in Wiener Neustadt, AUSTRIA. from Sample Gas Conditioning Product line

  • Premium

    HI-Q - Kinetic Impactor Inlets

    HI-Q Environmental Products Company's AK-Series adjustable Annular Kinetic Impactor Heads are designed for collecting alpha, beta, & gamma-emitting contaminants, plutonium fission, Radon decay products and size specific dust particles. By adjusting the stopping distance (nozzle to impactor plate distance) and varying the particle velocities an ...

    By HI-Q Environmental Products Company based in San Diego, CALIFORNIA (USA). from Size Selective Particulate Sampling Inlets Product line

  • Premium

    JCT - Model JES-301E1SVZ - Gas Sampling Probe

    Applications: Representative continuous gas sampling in processes containing dust and humidity. Installation in Ex-zone 1, 2 or 21, 22. Hazardous gases. Pressurized processes. Extractive gas analysis. Emission (CEMS) and process Monitoring. Removal of dust from the sample gas.

    By JCT Analysentechnik GmbH based in Wiener Neustadt, AUSTRIA. from Ex-approved Product line

  • Premium

    JCT - Model JPES - Portable Gas Sampling Probe with JHSo Heated Sample Line

    Applications: For mobile extractive gas analysis. For emission and process monitoring. For mobile representative gas sampling in dust and humidity containing processes. For removal of dust from the sample gas stream. For condensate free transport from the sampling point to the conditioning system or the analyser. Especially designed for:. Stack ...

    By JCT Analysentechnik GmbH based in Wiener Neustadt, AUSTRIA. from Portable Product line

  • Premium

    Gasmet - Portable Sampling Unit

    The portable sampling unit has been designed for portable emission monitoring measurements. The portable sampling unit is used for on-site measurements. It can be used for measuring trace concentrations of pollutants in wet, corrosive gas streams. The sample gas can be measured undiluted and without drying since the sample pump, heated filter and ...

    By Gasmet Technologies Oy based in Helsinki, FINLAND. from Portable Gas Analyzers Product line

  • Model TD1200 - Dust Collector

    Specification – TD1200. Model: TD1200..Capacity: 1200cfm. Total Emission to Atmosphere: <10mg/mâ³>. Filters: Pleated Spun Bonded Polyester Needlefelt. Expected Filter Life: In excess of 4 Years (under normal operating conditions).Filter Cleaning: Reverse Jet Pulse (Venturi Assisted). Control System: Differential Pressure ...

    By Mineral Stats Inc based in Lakewood, COLORADO (USA). from Sample Preparation Product line

  • Premium

    Eijkelkamp - Model 12.25 - Peristaltic Pump

    This peristaltic pump, specially designed for use in the field, is battery powered and microprocessor controlled. The microprocessor enables an adjustable constant number of revolutions (which can be stored in memory), protection against overload and various modes of external control. Controlling the peristaltic pump can be executed via the ...

    By Eijkelkamp Soil & Water based in Giesbeek, NETHERLANDS. from Water(-Bottom) Sampling Equipment Product line

  • Model PNS 16T-3.1 and PNS 16T-6.1 - Sampling Systems

    Automatic sequential sampling systems for sampling PM10 (acc. to CEN12341), PM2.5 (acc. to CEN14907) and PM1 particulates: Sampler and filter changer in one compact housing. Magazine with 16 filter cassettes. Replacement magazine with 15 filter cassettes. Continuous monitoring without the manual exchange of filters. Vented housing. For 47 mm ...

    By Comde-Derenda GmbH based in Stahnsdorf, GERMANY. from Dust Sampling Devices Product line

  • Model PNS 16T-30.2 - Sampling Systems

    Automatic sequential samling system for sampling PM10 (acc. to CEN12341) and PM2.5 (acc. to CEN14907) on 150 mm filters: Sampler and filter changer in one compact housing. Magazine with 16 filter cassettes. Replacement magazine with 15 filter cassettes. Continuous monitoring without the manual exchange of filters. Vented housing. For 150 mm ...

    By Comde-Derenda GmbH based in Stahnsdorf, GERMANY. from Dust Sampling Devices Product line

  • Medium Volume Sampler

    Medium volume sampler for sampling PM10, PM2.5 and PM1 particulates: Reference device for collect particulates from outdoor air in compliance with the CEN 12341 (PM10) and CEN 14907 (PM2.5) standards. Simple operation; menu-based control using a jog dial. Large, illuminated graphic display. Operating modes TIME, PERIOD and QUANTITY. Displays for ...

    By Comde-Derenda GmbH based in Stahnsdorf, GERMANY. from Dust Sampling Devices Product line

  • Model PNS 16-PUC - Sampling System

    Automatic sampling system for sampling PM10; PM2.5 and PM1 particles as well as aerosols and volatile particles: Sampler and filter changer in one compact housing. Filter changer with a downstream stainless steel cartridges for additional filter material (e.g. PU foam). Allows sampling of numerous gas-phase organic toxics. Magazine with 16 filter ...

    By Comde-Derenda GmbH based in Stahnsdorf, GERMANY. from Dust Sampling Devices Product line

  • Model PNS 16-3.1 and PNS 16-6.1 - Sampling Systems

    Automatic sequential sampling systems for sampling PM10 (acc. to CEN12341), PM2.5 (acc. to CEN14907) and PM1 particulates. The dust collection system comprises a low-volume sampler unit (LVS) and a filter changer with an intake tube and sampling head (inlet) to collect particulate matter from outdoor air. It functions as per CEN 12341 (PM10) and ...

    By Comde-Derenda GmbH based in Stahnsdorf, GERMANY. from Dust Sampling Devices Product line

  • Low Volume Sampler

    Low volume sampler for sampling PM10, PM2.5 and PM1 particulates: Reference device for collect particulates from outdoor air in compliance with the CEN 12341 (PM10) and CEN 14907 (PM2.5) standards. Simple operation; menu-based control using a jog dial. Large, illuminated graphic display. Operating modes TIME, PERIOD and QUANTITY. Displays for ...

    By Comde-Derenda GmbH based in Stahnsdorf, GERMANY. from Dust Sampling Devices Product line

  • SKC - IOM Sampler for Inhalable Dust

    The IOM sampler is a reusable filter cassette with a sampling head designed to better measure the worker's exposure to total airborne particulates.

    By SKC Limited based in Dorset, UNITED KINGDOM. from Sampling Heads Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you