environmental sampling Equipment available in Marshall Islands

Available in Marshall Islands| Near Marshall Islands
141 Results found

We couldn't find any environmental sampling equipment in Marshall Islands

Here is a list of results available in Marshall Islands

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Monitoring & Testing ×

  • Subcategory: Environmental Sampling ×

  • Keyword: environmental sampling ×

  • Available in: Australasia ×

  • Available in: Marshall Islands ×

Environmental Soil Sampling Kits

by Art’s Manufacturing and Supply, Inc. (AMS Inc.)     based in American Falls, IDAHO (USA)

All stainless steel for environmental sampling. Used in soils with low levels of contaminants or where equipment will be cleaned using an acid bath technique. Contains the same components as the basic kit but in all stainless. Includes: Regular, sand and mud augers, cross handle, split soil core sampler, slide hammer, three 4' extensions, plastic ...

Environmental Sensors - Model Z-XP Series - Portable Electrochemical Sensor Pump

by Environmental Sensors Company     based in Boca Raton, FLORIDA (USA)

Internal Pump: This series builds on the technology of the Z instruments. These instruments use the same electrochemical sensor and design as the Z series, but Z-XP series employ an internal sampling pump instead of diffusion sampling.


HI-Q - Solar Power Air Sampling System Design

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

Since 1973 HI-Q Environmental Products Company's engineering staff has designed and developed hundreds of 'Custom, Turn-Key' Air Sampling Systems. Among these custom units are Complete Solar Powered Air Sampling Systems, which require Low Amp Draw, DC driven vacuum pumps. Let HI-Q's experience work for you.

HORIBA - Model GPS5 - Gas Sampling System

by HORIBA Europe GmbH     based in Leichlingen, GERMANY

HORIBA gas samplers are suitable for volume-correct taking of gaseous samples during emission and emission measurements. This device can be used wherever gases and gaseous components must be inspected.

Aurora VERSA - Model 110 - Environmental Sample Processing Workstation

by Aurora Biomed Inc.     based in Vancouver, BRITISH COLUMBIA (CANADA)

As the health effects of environmental contamination are better understood, regulations become more stringent for persistent environmental organic contaminants in water and processed or unprocessed foods. Environmental agencies and the food processing industry are hard-pressed to detect and measure contaminations in water, soil, and food samples; ...

Pagani - Kit DS-44 for environmental sampling with dynamic penetrometer

by Pagani Geotechnical Equipment s.r.l.     based in Calendasco, ITALY

The Pagani DS-44 is a thick-walled sampler with apiston and it is driven into the ground byhammering. The piston allows to take samples at thedepth required. The impact-hammer-driving systemminimizes adverse effects such as heating effect,which occurs in sampling with rotation drivesystems.

HI-Q - Custom Mobile Air Sampling & Equipment Carts

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

HI-Q Environmental Products Company's Custom Mobile Air Sampling & Equipment Carts have proven to be industry leaders. From the heavy-duty design of the MRV0523CV-ALPHA used primarily to support ALPHA CAM's, to the telescoping equipment platform of the MSC-PLSTC used primarily for the transport of complete battery operated air sampling ...

Hi-Q - Equipment Lab Jack

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

HI-Q Environmental Products Company's adjustable height lab jack can be used in supporting & elevating air sampling equipment and calibration devices with an extension range between 3½' to 14'. The LABJACK's sturdy frame can support equipment weighing up to 45 lbs. on its 6¼' x 7½' platform.

HI-Q - Quick Disconnect & Hose Fittings

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

The following Quick Disconnect Couplings and Hose Barbs are for 'RV' Series Holders and Sampling Systems. HI-Q stocks male & female Stainless Steel and Brass Quick Disconnect fittings for all 3/8' fitting combinations.

HI-Q - Model 12/24 VDC - Portable Power Source for Air Samplers

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

Power to run battery operated air samplers. Mobile Power Source for 12/24 VDC Accessories. Rechargeable, Cordless, and Easy to use. Side Compartments Protect Cables. 2000 Peak Amps. Heavy Duty Insulated Clamps. Sealed Battery won't leak, All Position Use. Recharges from any 110V or 12 VDC Outlet. Charge Level Indicator Lights.

HI-Q - Air Sampling & Equipment Tripods

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

HI-Q's TR-1, TR-1000B, & TR-2000A are Light, Medium, & Heavy Duty Air Sampling & Equipment Tripods capable of extended sampling heights over 58 inches. For lightweight instrumentation, 12 pounds or less, HI-Q recommends the TR-1. For tripod applications which must be capable of supporting up to a 15 pound workload capacity, HI-Q offers ...

HI-Q - Stack Sampling System Design

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

HI-Q is ready to help with your stack sampling requirements: State and Federal nuclear regulatory agencies require a stack discharge sampling program as part of the licensing process. Radionuclides discharged to the air in the form of particulate and volatile compounds must be assayed. Therefore, nuclear facilities are required to follow standard ...

HI-Q - Model PM-10 - Sampling Inlet

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

HI-Q Environmental Products Company's High Volume PM-10 Size Selective Inlet samples suspended particulate in the air at a flow rate of 40 CFM through its omnidirectional head. The air is then accelerated through multiple internal nozzles toward a greased collection plate. Due to their larger momentum, particles greater than 10 microns cannot ...

HI-Q - Sample & Return Exhaust Lines

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

Many air sampling procedures call for remote site sampling where the vacuum source (air sampling pump) cannot be conveniently located in the same area where sampling is required. This may be due to a variety of reasons including explosive sampling environments, inaccessibility, and noise level restrictions. For this reason, HI-Q has developed two ...

HI-Q - Dry Gas Totaling Meters

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

HI-Q offers a wide range of dry gas totaling meters which, when incorporated in an air sampling system, are an excellent source for recording the total volume of air sampled. The gas-totaling meter may either be connected to have gas supplied through the inlet (connected to the exhaust of a positive displacement pump) or drawn through the outlet ...

HORIBA - Model APHA-370 - Ambient THC Monitor / Ambient Air Monitor

by HORIBA Europe GmbH     based in Leichlingen, GERMANY

The APHA-370 continuously monitors atmospheric THC, NMHC, and CH4 concentrations using a cross-flow modulated selective combustion type method combined with a hydrogen ion detection method. The APHA-370 employs an independent, internal dry-method sampling device to achieve the highest levels of sensitivity and accuracy.

HI-Q - Model PM-2.5 - Sampling Inlet with Filter Holder

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

HI-Q Environmental Products Company's, EPA Designed, PM-2.5 Sample inlet operates on the same principles of particulate impaction as the PM10-INLET described above. Air is drawn into the omnidirectional inlet head at a flow rate of 16.67 LPM. The air is then accelerated toward the first impaction stage where particulate with aerodynamic diameters ...

HI-Q - Model CF-1512/24-VBRL - Variable Speed, Brushless DC Air Sampler

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

Due to its low Amp draw, variable speed flow rate control, brushless maintenance free blower and portability, the CF-1512-VBRL is considered to be 'The Ideal External Battery Operated Air Sampler'. The brushless blower used in the CF-1512-VBRL draws a maximum of 3.0 Amps at 6.5 CFM, permitting longer sampling times on a single battery charge. For ...

HORIBA - Model APOA-370 - Ambient Ozone Monitor

by HORIBA Europe GmbH     based in Leichlingen, GERMANY

The APOA-370 continuously monitors atmospheric ozone concentrations using a cross flow modulated ultraviolet absorption method. The APOA-370 employs an independent, internal dry-method sampling device to achieve the highest levels of sensitivity and accuracy. The dry method, due to its minimal maintenance requirements and capability of ...

HI-Q - Kinetic Impactor Inlets

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

HI-Q Environmental Products Company's AK-Series adjustable Annular Kinetic Impactor Heads are designed for collecting alpha, beta, & gamma-emitting contaminants, plutonium fission, Radon decay products and size specific dust particles. By adjusting the stopping distance (nozzle to impactor plate distance) and varying the particle velocities an ...

Need help finding the right suppliers?

Let the XPRTs do the work for you