gas sampling Equipment available in Macedonia

Available in Macedonia| Near Macedonia
248 Results found

We couldn't find any gas sampling equipment in Macedonia

Here is a list of results available in Macedonia

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Monitoring & Testing ×

  • Subcategory: Environmental Sampling ×

  • Keyword: gas sampling ×

  • Available in: Europe ×

  • Available in: Macedonia ×

Model 22148-U - Gas Sampling Bulb

by Sigma-Aldrich Co., LLC     based in Bellefonte, PENNSYLVANIA (USA)

Gas Sampling Bulb size 500 mL, glass stopcock.

Model 22147-U - Gas Sampling Bulb

by Sigma-Aldrich Co., LLC     based in Bellefonte, PENNSYLVANIA (USA)

Gas Sampling Bulb size 250 mL, glass stopcock

Tedlar - Model 24655 - Gas Sampling Bag

by Sigma-Aldrich Co., LLC     based in Bellefonte, PENNSYLVANIA (USA)

General description Tedlar is recommended in several US EPA methods for sampling VOCs and sulfur compounds. Our Tedlar is made from a high-quality 2 mil Tedlar film for superior inertness, impermeability, sample integrity and good recovery data. Our Push Lock Valve (PLV) and seam-sealing process ensure that these bags are sturdy and virtually ...

Tedlar - Model 24634 - Gas Sampling Bag

by Sigma-Aldrich Co., LLC     based in Bellefonte, PENNSYLVANIA (USA)

Tedlar is recommended in several US EPA methods for sampling VOCs and sulfur compounds. Our Tedlar is made from a high-quality 2 mil Tedlar film for superior inertness, impermeability, sample integrity and good recovery data. Our valve and seam-sealing process ensure that these bags are sturdy and virtually leak-proof, even under the most ...

Model 22144-U - Gas Sampling Bulb

by Sigma-Aldrich Co., LLC     based in Bellefonte, PENNSYLVANIA (USA)

Gas Sampling Bulb size 1000 mL, glass stopcock.

Model 22162-U - Gas Sampling Bulb

by Sigma-Aldrich Co., LLC     based in Bellefonte, PENNSYLVANIA (USA)

Gas Sampling Bulb size 250 mL, PTFE stopcock.

Model 22146-U - Gas Sampling Bulb

by Sigma-Aldrich Co., LLC     based in Bellefonte, PENNSYLVANIA (USA)

Gas Sampling Bulb size 125 mL, glass stopcock.

Model 22161 - Gas Sampling Bulb

by Sigma-Aldrich Co., LLC     based in Bellefonte, PENNSYLVANIA (USA)

Gas Sampling Bulb size 125 mL, PTFE stopcock.

Model 22163-U - Gas Sampling Bulb

by Sigma-Aldrich Co., LLC     based in Bellefonte, PENNSYLVANIA (USA)

Gas Sampling Bulb size 500 mL, PTFE stopcock.

Model 22145-U - Gas Sampling Bulb

by Sigma-Aldrich Co., LLC     based in Bellefonte, PENNSYLVANIA (USA)

Gas Sampling Bulb size 1000 mL, PTFE stopcock.

Tedlar - Model 24654 - Gas Sampling Bag

by Sigma-Aldrich Co., LLC     based in Bellefonte, PENNSYLVANIA (USA)

Tedlar is recommended in several US EPA methods for sampling VOCs and sulfur compounds. Our Tedlar is made from a high-quality 2 mil Tedlar film for superior inertness, impermeability, sample integrity and good recovery data. Our Push Lock Valve (PLV) and seam-sealing process ensure that these bags are sturdy and virtually leak-proof, even under ...

Tedlar - Model 24633 - Gas Sampling Bag

by Sigma-Aldrich Co., LLC     based in Bellefonte, PENNSYLVANIA (USA)

Tedlar is recommended in several US EPA methods for sampling VOCs and sulfur compounds. Our Tedlar is made from a high-quality 2 mil Tedlar film for superior inertness, impermeability, sample integrity and good recovery data. Our valve and seam-sealing process ensure that these bags are sturdy and virtually leak-proof, even under the most ...

HORIBA - Model GPS5 - Gas Sampling System

by HORIBA Europe GmbH     based in Leichlingen, GERMANY

HORIBA gas samplers are suitable for volume-correct taking of gaseous samples during emission and emission measurements. This device can be used wherever gases and gaseous components must be inspected.

Model 20668 - LB-1 Septa, Cylindrical

by Sigma-Aldrich Co., LLC     based in Bellefonte, PENNSYLVANIA (USA)

Thermogreen LB-1 Cylindrical Septa for Shimadzu septum type, cylindrical with half-hole.

Gas Sampling Bags

by Tisch Environmental Inc. - Tisch International     based in Cleves, OHIO (USA)

The most significant improvement in bag valves yet conceived, is the patented BGI 'SWIVEL LOCK'. Its unique stainless steel construction, absolutely prevents leakage to the ambient environment. Other valves have the potential of leaking in the filling or emptying position. Any standard 1/4 inch I.D. Tubing is compatible with the barbed fitting on ...

Gas Sampling Probes

by B B Thermo-Technik GmbH     based in Donaueschingen, GERMANY

Whether with sampling tubes with diameter 10 mm, 8 mm or 6 mm, the B+B Thermo-Technik Gas Sampling Probes gives very fast results. The BlmSchG requested requirement T98 < 50 Sec are  always undercut. Combined with the fast analyse cells standardly used in the Smoke analysing devices, the B+B sampling probes enable a nearly synchronous ...

Ankersmid - Model ASP 611/613/622 ATEX - Gas Sample Probe

by Ankersmid Sampling / M&C Products B.V.B.A     based in Wilrijk, BELGIUM

Due to its modular design and various options, the Ankersmid heated sample probe filters cover the widest range of applications. In the heated filter body a filter element of 150mm length, suitable for most applications up to 1g dust/m3, is integrated. A 180mm long filter with an outer diameter of 40mm and made of stainless steel can be optionally ...

Perma Pure - Model MD Series - Gas Sample Dryers

by Perma Pure LLC     based in Lakewood, NEW JERSEY (USA)

Perma Pure MD-Series gas sample dryers use exclusive Nafion selectively permeable membrane tubing to continuously dry gas streams removing only water vapor. These dryers operate over a wide range of temperatures, pressures and flow rates, and dry to dew points as low as -60°C.

Gas Sampling Unit GSU

by Comde-Derenda GmbH     based in Stahnsdorf, GERMANY

Gas sampling unit for exposing gas absorption tubes. Battery or 12/24 V mains operation. Regulated constant throughput 10...30 nml/min or customer-specific. Modular construction, up to two separate regulated channels. Temperature-regulated collection chamber for absorption tubes (max. 20 °C).

Ankersmid - Model ASP 100 - Gas Sample Probe

by Ankersmid Sampling / M&C Products B.V.B.A     based in Wilrijk, BELGIUM

Due to various acid dew points at various applications the probe is heated up to 180°C. A filter element of 150mm is integrated, suitable for most applications up to 1g dust/m3. A significant advantage is that this filter is replaceable without dismounting the probe and without using any tools. Due to its modular design and various options, ...

Need help finding the right suppliers?

Let the XPRTs do the work for you