gas sampling Equipment in Finland

27 Results found

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Monitoring & Testing ×

  • Subcategory: Environmental Sampling ×

  • Keyword: gas sampling ×

  • In: Europe ×

  • In: Finland ×

HORIBA - Model GPS5 - Gas Sampling System

by HORIBA Europe GmbH     Office in FINLAND

HORIBA gas samplers are suitable for volume-correct taking of gaseous samples during emission and emission measurements. This device can be used wherever gases and gaseous components must be inspected.

Gasmet - Portable Sampling Unit

by Gasmet Technologies Oy     based in Helsinki, FINLAND

The portable sampling unit has been designed for portable emission monitoring measurements. The portable sampling unit is used for on-site measurements. It can be used for measuring trace concentrations of pollutants in wet, corrosive gas streams. The sample gas can be measured undiluted and without drying since the sample pump, heated filter and ...

Gasmet - Multipoint Sampling System (MSS)

by Gasmet Technologies Oy     based in Helsinki, FINLAND

The MSS is designed for continuous monitoring of multiple measuring points. It’s designed to work as an integral part of the FCX measuring system. The MSS is used for on-line measurements. It is an ideal tool to measure components of interest in ambient conditions from several measuring points. The sample pump, valves, filter and sample ...

Gasmet Technologies - Multipoint Sampling System – Heated (MSSH)

by Gasmet Technologies Oy     based in Helsinki, FINLAND

The MSSH is designed for continuous monitoring of multiple measuring points. It is designed to work as an integral part of the CEMS or FCX measuring systems. MSSH unit can be used as sampling system with pump for FCX system or as sample point switching box without pump with CEMS. The MSSH is used for on-line measurements. It is an ideal tool to ...

Model SP2000 - Regulated Heated / Non-Heated Gas Sample Probes

by M&C TechGroup Germany GmbH     Distributor in FINLAND

Gas sample probe type SP2000, with external ceramic filter type S-2K150, filter porosity: 2µm, filter element seal and lid seal out of Viton. mounting flange: DN65PN6B with thread G3/4'i.ion material: SS316, Viton, ceramic.  Regulated Heated / Non-Heated Gas Sample Probes  with ceramic filter element outside, optional: other filter ...

Dekati - Model FPS - Fine Particle Sampler

by Dekati Ltd.     based in Kangasala, FINLAND

Dekati® Fine Particle Sampler is a guaranteed solution for diluting and conditioning aerosol and gaseous samples for measurement instruments. This versatile dilution system allows dilution factor adjustment between 1:20 and 1:200 and first stage dilution temperature settings between 0 and 350 °C. Temperatures and pressures in different parts of ...

Dekati - Model Diluter - Dekati® Diluter

by Dekati Ltd.     based in Kangasala, FINLAND

Dekati® Diluter DI-1000 is a low-cost, simple and easy-to-operate device for diluting aerosol and gaseous samples from any source. The simplicity, ability to withstand high temperatures and the robustness of the all stainless-steel design have made it a widely renowned choice for dilution of combustion aerosols.The nominal dilution factor for a ...

Model GA-40Tplus - Gas Analyzer With Built-in Sample Conditioner

by madur Polska Sp. z o.o.     Distributor in FINLAND

Professional flue gas analyser that combines high quality of sample conditioning with great measurement accuracy contained in a compact soft casing. Analyser is equipped with heated hose with heated filter, built-in high efficient condensation dryer. It can be fitted with up to 9 sensors (electrochemical cells and NDIR sensors). Has built-in ...

NISKIN-X - Model 1010X - External Spring Water Sampler

by General Oceanics Inc.     Distributor in Helsinki, FINLAND

1010X External Spring Water Sampling Bottles Now you can have the simplicity and reliability of a Niskin water sampler and have a completely unobstructed sample chamber. The new Niskin X utilizes stainless steel external spring closures. The Niskin X Water Sampler can be activated by the GO Devil Messenger (1000-MG) when individually or serially ...

J.U.M. - Model VE 112WP - Panel Mount Heated Sample Filter and Interface

by J.U.M. Engineering GmbH     Distributor in FINLAND

Gas emissions analyzers in CEM’s or as stand alone are often exposed to heavy soot and dust contamination. Therefore it is necessary to filter the sample gas stream.

Model MP47 115V - Analytical Diaphragm Pump

by M&C TechGroup Germany GmbH     Distributor in FINLAND

Analytical diaphragm pump type MP47. Material: PTFE. Capacity: 6l/min. at atm. pressure. Connections: G1/4'i. Power: 115V/60Hz, IP20. Capacity: 6 Nl/min without pressure, also available with double diaphragm system, power 115V/60Hz or 230V/50Hz

Model MP47 230V - Analytical Diaphragm Pump

by M&C TechGroup Germany GmbH     Distributor in FINLAND

Analytical diaphragm pump type MP47. Material: PTFE. Capacity: 6l/min. at atm. pressure. Connections: G1/4'i, Power: 230V/50Hz, IP20. Capacity: 6 Nl/min without pressure, also available with double diaphragm system, power 115V/60Hz or 230V/50Hz

Crowcon - Single Point Sample System

by Crowcon Detection Instruments Ltd - a Halma company     Distributor in FINLAND

The single point system is designed to monitor gas samples from pipelines or processes. A powerful high-flow pump extracts and transports gas samples to the system where they are conditioned to remove dust and moisture. The conditioned sample gas is then passed across one and four gas sensors before being either exhausted to atmosphere or returned ...

Crowcon - Air Aspirator Sampling Systems

by Crowcon Detection Instruments Ltd - a Halma company     Distributor in FINLAND

Designed for use in Zone 1 or Zone 2 hazardous areas, the air aspirated system uses a compressed air driven vacuum generator to draw a gas sample from a single point. Explosion- proof gas detectors are fitted to monitor for flammable gases, toxic gases or oxygen. Each detector provides a 4-20mA output. An intrinsically safe flow-fail device warns ...

Crowcon - Mill-Gard CO Detection System

by Crowcon Detection Instruments Ltd - a Halma company     Distributor in FINLAND

The Mill-Gard CO detection system provides early warning of a fire within coal pulversizers and silo’s. Designed specifically for use in coal-fired power stations, the system uses powerful pumps to extract air samples from the coal mill via hardened sample probes. The air samples are conditioned and passed over industrial grade C.O. (carbon ...

Crowcon - Multi Point Continuous Sample System

by Crowcon Detection Instruments Ltd - a Halma company     Distributor in FINLAND

The multi-point system uses the same sampling arrangement as the single point system, but can monitor up to 16 separate sample lines on a sequential basis. The multi-point system provides a cost effective and low maintenance solution for monitoring gas hazards in buildings, pumping stations, storage areas etc. Each sample line is monitored for one ...

Model SP2000-H/DIL 230V - Dilution Probe

by M&C TechGroup Germany GmbH     Distributor in FINLAND

Gas sample dilution probe type SP2000-H/DIL. With external ceramic filter type S-2K150, filter porosity: 2µm, with electrically heated external filter 0-180°C adjustable by an incorporated thermostat, over temperature limiter with reset key at +30°C Tsetting and low temp. alarm with potential free status-alarm contact at -30°C ...

Crowcon - Model PGSi - Programmable Sampling System

by Crowcon Detection Instruments Ltd - a Halma company     Distributor in FINLAND

The PGSi is a highly versatile system that can monitor up to 32 separate sample lines on a sequential basis. Operating from Windows XP based software, the PGSi system is the ideal solution for monitoring landfill gas in boreholes, or for protecting buildings such as retail parks, hospitals and schools built on landfill sites. The system can be ...

HORIBA - Model APMA-370 - Ambient Carbon Monoxide Monitor

by HORIBA Europe GmbH     Office in FINLAND

The APMA-370 is a device for continuously monitoring CO concentrations using a Non-dispersion cross modulation infrared analysis method. The APMA-370 employs an independent, internal dry-method sampling device to achieve the highest levels of sensitivity and accuracy. The dry method, due to its capability for continuously monitoring and ...

HORIBA - Model APHA-370 - Ambient THC Monitor / Ambient Air Monitor

by HORIBA Europe GmbH     Office in FINLAND

The APHA-370 continuously monitors atmospheric THC, NMHC, and CH4 concentrations using a cross-flow modulated selective combustion type method combined with a hydrogen ion detection method. The APHA-370 employs an independent, internal dry-method sampling device to achieve the highest levels of sensitivity and accuracy.

Need help finding the right suppliers?

Let the XPRTs do the work for you