gas sampling pump Equipment available in Iowa

Available in Iowa| Near Iowa
81 Results found

We couldn't find any gas sampling pump equipment in Iowa

Here is a list of results available in Iowa

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Monitoring & Testing ×

  • Subcategory: Environmental Sampling ×

  • Keyword: gas sampling pump ×

  • Available in: USA ×

  • Available in: Iowa ×

Gastec - Model 100s - Gas Sampling Pump

by A. P. Buck Inc.     based in Orlando, FLORIDA (USA)

Gastec’s standard GV-100 gas sampling pump is lightweight and rugged. It includes a Thermal Ring for measuring ambient temperature; a flow finish indicator for identifying full and partial pump strokes; the Gastec Handbook containing complete detector tube details; and protective, semi-rigid carrying case.

Protea - Pumps

by Protea Limited     based in Middlewich, UNITED KINGDOM

Protea’s gas analysers are extractive gas analysers and as such we need to ensure repeatable, consistent sample flow is provided to the equipment. The choice of pump is of great importance to ensure high uptime of analytical equipment. Protea can supply low-cost, low flow sample pumps for mobile applications. For sampling of corrosive gases, ...

F&J - Model GAS-EDL-28B - Global Air Sampling System (110V)

by F&J SPECIALTY PRODUCTS, INC.     based in Ocala, FLORIDA (USA)

The Model GAS-EDL-28B Global Air Sampling System is a microprocessor controlled low volume air sampler. The pump is mounted on a base plate within a weather resistant aluminum environmental enclosure having four rubber feet. Handles are provided on the enclosure to facilitate transportation. The enclosure rating is IPX3.

Gasmet - Portable Sampling Unit

by Gasmet Technologies Oy     based in Helsinki, FINLAND

The portable sampling unit has been designed for portable emission monitoring measurements. The portable sampling unit is used for on-site measurements. It can be used for measuring trace concentrations of pollutants in wet, corrosive gas streams. The sample gas can be measured undiluted and without drying since the sample pump, heated filter and ...

HI-Q - Dry Gas Totaling Meters

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

HI-Q offers a wide range of dry gas totaling meters which, when incorporated in an air sampling system, are an excellent source for recording the total volume of air sampled. The gas-totaling meter may either be connected to have gas supplied through the inlet (connected to the exhaust of a positive displacement pump) or drawn through the outlet ...

Protea - Filters

by Protea Limited     based in Middlewich, UNITED KINGDOM

Filtering of gas for particulate matter is of great importance to ensure high uptime for gas analysers and sample pumps. With Protea’s experience of process and emissions monitoring of many different applications, we can recommend the best choice of filter material and porosity. With our advanced FTIR gas analysers we are able to source and ...

HORIBA - Model GPS5 - Gas Sampling System

by HORIBA Europe GmbH     based in Leichlingen, GERMANY

HORIBA gas samplers are suitable for volume-correct taking of gaseous samples during emission and emission measurements. This device can be used wherever gases and gaseous components must be inspected.

Protea - Model SSCM - Self-contained Sampling System Control Module

by Protea Limited     based in Middlewich, UNITED KINGDOM

Self-contained sampling control for use with Protea core gas analysers. The control of the gas sample in any analysis system is critical. From heated sample lines and probes to pump control, the management of the system is important to stop any damage to analytical hardware. For this reason, Protea supplies the Sampling System Control Module ...

Environnement S.A. - Model MICA 2M - Sample Handling System

by Environnement S.A     based in Poissy, FRANCE

Sample Handling System: used for pumping and conditioning the exhaust gas from the engine to the testing cabinet and analysers.

Sample Pro - Low-Flow Portable Pump for Groundwater Sampling

by QED Environmental Systems     based in Dexter, MICHIGAN (USA)

The first fully take-apart sampling pump for Low-Flow Sampling and Direct-Push groundwater sampling applications. The Sample Pro Portable MicroPurge Pump is the first pump developed specifically to bring the advantages of low-flow sampling to sites where groundwater samples are collected from many monitoring wells with the same pump.

Gasmet - Multipoint Sampling System (MSS)

by Gasmet Technologies Oy     based in Helsinki, FINLAND

The MSS is designed for continuous monitoring of multiple measuring points. It’s designed to work as an integral part of the FCX measuring system. The MSS is used for on-line measurements. It is an ideal tool to measure components of interest in ambient conditions from several measuring points. The sample pump, valves, filter and sample ...

Environmental Sensors - Model Z-XP Series - Portable Electrochemical Sensor Pump

by Environmental Sensors Company     based in Boca Raton, FLORIDA (USA)

Internal Pump: This series builds on the technology of the Z instruments. These instruments use the same electrochemical sensor and design as the Z series, but Z-XP series employ an internal sampling pump instead of diffusion sampling.

Gasmet Technologies - Multipoint Sampling System – Heated (MSSH)

by Gasmet Technologies Oy     based in Helsinki, FINLAND

The MSSH is designed for continuous monitoring of multiple measuring points. It is designed to work as an integral part of the CEMS or FCX measuring systems. MSSH unit can be used as sampling system with pump for FCX system or as sample point switching box without pump with CEMS. The MSSH is used for on-line measurements. It is an ideal tool to ...

Texas Sampling - Detector Tube Sample System

by Texas Sampling, Inc.     based in Spartanburg, SOUTH CAROLINA (USA)

Texas Sampling, Inc. Detector Tube sample system is used to take a relative emission free sample safely. To do this, our system drops the pressure to 5 PSIG or less. The large cylinder (top right) is used as a low pressure accumulation chamber that the gas flows through. The Drager tube is inserted in the top fitting to the right of the cylinder ...

Model GA-40Tplus - Gas Analyzer With Built-in Sample Conditioner

by madur Polska Sp. z o.o.     based in Zgierz, POLAND

Professional flue gas analyser that combines high quality of sample conditioning with great measurement accuracy contained in a compact soft casing. Analyser is equipped with heated hose with heated filter, built-in high efficient condensation dryer. It can be fitted with up to 9 sensors (electrochemical cells and NDIR sensors). Has built-in ...

Model MP47 115V - Analytical Diaphragm Pump

by M&C TechGroup Germany GmbH     based in Ratingen, GERMANY

Analytical diaphragm pump type MP47. Material: PTFE. Capacity: 6l/min. at atm. pressure. Connections: G1/4'i. Power: 115V/60Hz, IP20. Capacity: 6 Nl/min without pressure, also available with double diaphragm system, power 115V/60Hz or 230V/50Hz

Model MP47 230V - Analytical Diaphragm Pump

by M&C TechGroup Germany GmbH     based in Ratingen, GERMANY

Analytical diaphragm pump type MP47. Material: PTFE. Capacity: 6l/min. at atm. pressure. Connections: G1/4'i, Power: 230V/50Hz, IP20. Capacity: 6 Nl/min without pressure, also available with double diaphragm system, power 115V/60Hz or 230V/50Hz

Sample Pump

by Clean Air Engineering, Inc.     based in Palatine, ILLINOIS (USA)

The Sample Pump assembly has a single head, Teflon lined sample pump mounted in a rugged metal enclosure.The Sample Pump Includes 0.5-10.0 LPM flow meter with stainless steel valve, replaceable inline filter, front panel mounted on/off switch and circuit breaker. The inlet and outlet of the Sample Pump have 1/4' SS compression fittings.

AGT - Model MAK 10-2 - Sample Gas Conditioning Systems

by AGT Thermotechnik GmbH & Co.KG     based in Erkelenz, GERMANY

MAKs are compressor coolers for highest demands of sample gas quality.  With optional components (pre-separator, filter, flowmeter, acid dosage, humidity sensor, sample gas pump) you can upgrade MAK sample gas coolers to complete integrated sample gas conditioning systems. The flexible, modular design ensures optimal compatibility to all ...

J.U.M. - Model VE 112WP - Panel Mount Heated Sample Filter and Interface

by J.U.M. Engineering GmbH     based in Karlsfeld, GERMANY

Gas emissions analyzers in CEM’s or as stand alone are often exposed to heavy soot and dust contamination. Therefore it is necessary to filter the sample gas stream.

Need help finding the right suppliers?

Let the XPRTs do the work for you