particulate sampling Equipment available in Paraguay

Available in Paraguay| Near Paraguay
48 Results found

We couldn't find any particulate sampling equipment in Paraguay

Here is a list of results available in Paraguay

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Monitoring & Testing ×

  • Subcategory: Environmental Sampling ×

  • Keyword: particulate sampling ×

  • Available in: Latin America ×

  • Available in: Paraguay ×

Automatic Filter Changers

by Sierra Instruments, Inc.     based in Monterey, CALIFORNIA (USA)

The Sierra Automatic Filter Changer allows the engineer to complete several tests in succession. Our automatic filter changer works seamlessly with the Model BG-3 to fully automate particulate collection to greatly improve testing efficiency and more importantly, testing safety. The system can hold up to 22 (dependent on filter size, 47mm, 70mm, ...

Westech - Model M9096 - Particulate Sampling Train

by Westech Scientific Instruments (Westech)     based in Upper Stondon, UNITED KINGDOM

The M9096 In-Stack Manual Method Particulate Sampler for ISO9096, EN13284-1, US EPA Method 17

HI-Q - Model PM-10 - Sampling Inlet

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

HI-Q Environmental Products Company's High Volume PM-10 Size Selective Inlet samples suspended particulate in the air at a flow rate of 40 CFM through its omnidirectional head. The air is then accelerated through multiple internal nozzles toward a greased collection plate. Due to their larger momentum, particles greater than 10 microns cannot ...

HI-Q - Model PM-2.5 - Sampling Inlet with Filter Holder

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

HI-Q Environmental Products Company's, EPA Designed, PM-2.5 Sample inlet operates on the same principles of particulate impaction as the PM10-INLET described above. Air is drawn into the omnidirectional inlet head at a flow rate of 16.67 LPM. The air is then accelerated toward the first impaction stage where particulate with aerodynamic diameters ...

HI-Q - Kinetic Impactor Inlets

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

HI-Q Environmental Products Company's AK-Series adjustable Annular Kinetic Impactor Heads are designed for collecting alpha, beta, & gamma-emitting contaminants, plutonium fission, Radon decay products and size specific dust particles. By adjusting the stopping distance (nozzle to impactor plate distance) and varying the particle velocities an ...

Protea - Filters

by Protea Limited     based in Middlewich, UNITED KINGDOM

Filtering of gas for particulate matter is of great importance to ensure high uptime for gas analysers and sample pumps. With Protea’s experience of process and emissions monitoring of many different applications, we can recommend the best choice of filter material and porosity. With our advanced FTIR gas analysers we are able to source and ...

HI-Q - Stack Sampling System Design

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

HI-Q is ready to help with your stack sampling requirements: State and Federal nuclear regulatory agencies require a stack discharge sampling program as part of the licensing process. Radionuclides discharged to the air in the form of particulate and volatile compounds must be assayed. Therefore, nuclear facilities are required to follow standard ...

HI-Q - Dry Gas Totaling Meters

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

HI-Q offers a wide range of dry gas totaling meters which, when incorporated in an air sampling system, are an excellent source for recording the total volume of air sampled. The gas-totaling meter may either be connected to have gas supplied through the inlet (connected to the exhaust of a positive displacement pump) or drawn through the outlet ...

IC Control - Model 521 - 316 SS Industrial Process Sampler

by IC Controls Ltd.     based in Orangeville, ONTARIO (CANADA)

We understand your need for a clean, representative, trouble-free sample for your on-line process monitors. Conventional filtering techniques accumulate dirt particles on the filter media until the media clogs and is replaced. The tangential filtration technique used in the model 521, however, passes virtually all of the particulate through the ...

Sabio - Model 1002/1004 - Heated Sample Manifolds

by Sabio Instruments, a division of Sutron Corporation     based in Round Rock, TEXAS (USA)

Collecting and distributing homogenous ambient air samples for gas analysis is easy with the Sabio Model 1002 and 1004 heated Sample Manifolds. Able to work equally well in dry or humid and salty environments, the manifold is well-suited for collecting reactive air toxic data.

Gasmet - Portable Sampling Unit

by Gasmet Technologies Oy     based in Helsinki, FINLAND

The portable sampling unit has been designed for portable emission monitoring measurements. The portable sampling unit is used for on-site measurements. It can be used for measuring trace concentrations of pollutants in wet, corrosive gas streams. The sample gas can be measured undiluted and without drying since the sample pump, heated filter and ...

HI-Q - Model PM-10 Series - High Volume Air Sampling Systems

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

The EPA Clean Air Act of 1987 established a measuring standard to evaluate and monitor the health effects of thoracic inhaleable particles. The standard was set that in order for an environment to be healthy, in terms of these particles, it must have a concentration of less than 150 mg/m3 of particles with aerodynamic diameters less than 10 ...

HI-Q - Model VS23-Series - Continuous Duty, Constant Flow Air Sampling Systems

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

The VS-Series Air Sampling Systems can be either incorporated as the primary vacuum source in air monitoring instrumentation or used in conjunction with filter holders and filter media for the collection of particulate and/or gaseous constituents. The systems are furnished complete with a shock mounted base motor/pump, carrying handle, heavy duty ...

Cellulose Depth Filters

by SKC Inc.     based in Eighty Four, PENNSYLVANIA (USA)

100% pure, ashless Cellulose Depth Filters are ideal for gravimetric sampling methods and are available in Type 40 (quantitative) and Type 4 (qualitative).tion medium. Two models of the BioStage Impactor are available to accommodate two different flow rates.

Environnement S.A. - Model Quick Lock™ - Heated Sample Filter System

by Environnement S.A     based in Poissy, FRANCE

Sampling system with heated line, integrated particles filter and backflushed - all self-regulated in temperature. Innovative «Quick Lock™» heated sample filter system allows for filter changes “on the fly” with no need to cool the sample system.

EPA Method 5 System - Determination of Particulate Emissions from Stationary Sources

by Keika Ventures, LLC (KV)     based in Chapel Hill, NORTH CAROLINA (USA)

Persons using this method should have thorough knowledge of at least the following additional test methods: Method 1, Method 2, and Method 3. For those unfamiliar with these other methods, you might want to take a theoretical course offered through our training division,, on Method 1 - 5.

Phenex - Syringe Filters

by Phenomenex, Inc.     based in Torrance, CALIFORNIA (USA)

Rapidly remove particulates from sample matrices.

SKC - IOM Sampler for Inhalable Dust

by SKC Limited     based in Dorset, UNITED KINGDOM

The IOM sampler is a reusable filter cassette with a sampling head designed to better measure the worker's exposure to total airborne particulates.

Copley Scientific - Model NanoMOUDI - Micro-Orifice Uniform Deposit Impactor

by Copley Scientific     based in Colwick, UNITED KINGDOM

The unique aerodynamic design of the MOUDI (Micro-Orifice Uniform Deposit Impactor) family of impactors makes it possible to collect size-fractionated airborne particulate matter over the widest possible range of particle sizes - 10 nm to 18 microns.

BioLite Sonic - Model 30.5 L/min - Flow,Sample Pump

by SKC Inc.     based in Eighty Four, PENNSYLVANIA (USA)

The BioLite, up to 30.5 L/min or sonic flow, area sample pump provides indefinite run times using a 230-V AC adapter for sampling particulates and bioaerosols. The pump is ideal for use with the SKC BioSampler and asbestos cassettes. CE marked Not UL Listed for intrinsic safety

Need help finding the right suppliers?

Let the XPRTs do the work for you