sampling chamber Equipment available in Kentucky

Available in Kentucky| Near Kentucky
85 Results found

We couldn't find any sampling chamber equipment in Kentucky

Here is a list of results available in Kentucky

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Monitoring & Testing ×

  • Subcategory: Environmental Sampling ×

  • Keyword: sampling chamber ×

  • Available in: USA ×

  • Available in: Kentucky ×

Flow-Through Sample Chamber

by Teledyne Isco     based in Lincoln, NEBRASKA (USA)

The Isco flow-through chamber makes 'dipper' type samplers obsolete, and is ideal for large treatment plants with multiple sampling points spread over a large area. This patented device (Patent # 5,341,690) allows you to eliminate time-consuming trips to retrieve samples from remote monitoring points. By installing flow-through chambers on ...

Flow Through Sample Chamber

by BioTector Analytical Systems Ltd     based in County Cork, IRELAND

The Flow Through Sample Chamber with Sand Trap is a self-cleaning, simple device which does not require filters or screens and is designed to operate in conjunction with the BioTector sample pump. The BioTector internal sample pump is connected to the Flow Through Chamber's sample head. When this pump runs in the forward direction (i.e. BioTector ...

OdoFlux - Sampling Chamber For Odours & Volatile Chemicals

by Odotech Inc.     based in Montreal, QUEBEC (CANADA)

Sampling chamber for odors & volatile chemicals from surface sources.

HI-Q - Model MK-30 - Sample Anaysis Monitoring Chamber

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

The MK-30 Sample Analysis Monitoring Chamber is used with a PC computer to provide measurements of swipe (smear) samples, evaporation samples, and air filters. The MK-30 has a shielded chamber to reduce background and increase measurement sensitivity. Various detectors can be used, for specific applications such as beta,gamma, and alpha/beta ...

ChemScan - Sample Circulation Chamber (SCC)

by Applied Spectrometry Associates (ASA Analytics)     based in Waukesha, WISCONSIN (USA)

For coarse screening. Algae screening protects analyzer inlet screens and reduces maintenance. Typical applications include post secondary clarifier. TSS is less than 150 mg/L, NTU is less than 60. Run is greater than 20 ft. Lift is greater than 5 ft. Maximum of Eight Sample Lines. External Pump(s) Required - Provided by ASA or Others 3-10 GPM

Texas Sampling - Fixed Volume Sample System

by Texas Sampling, Inc.     based in Spartanburg, SOUTH CAROLINA (USA)

When process sample pressure is too high, or the application calls for a fixed amount of sample, Texas Sampling's fixed volume sampler is a perfect selection. By turning one valve, you can isolate sample pressure, purge sample bottle before dispensing, and verify purge flow. Internally, our valve combines four different functions. A specific ...

Pollution - Model Polaris Probe - Heated Sampling Probe for TOC

by Pollution Srl     based in Budrio, ITALY

This probe represents the best accessory that matches Polaris FID portability. Built in with high quality materials, Polaris Probe is lightweight, compact and robust.

Texas Sampling - Detector Tube Sample System

by Texas Sampling, Inc.     based in Spartanburg, SOUTH CAROLINA (USA)

Texas Sampling, Inc. Detector Tube sample system is used to take a relative emission free sample safely. To do this, our system drops the pressure to 5 PSIG or less. The large cylinder (top right) is used as a low pressure accumulation chamber that the gas flows through. The Drager tube is inserted in the top fitting to the right of the cylinder ...

NISKIN-X - Model 1010X - External Spring Water Sampler

by General Oceanics Inc.     based in Miami, FLORIDA (USA)

1010X External Spring Water Sampling Bottles Now you can have the simplicity and reliability of a Niskin water sampler and have a completely unobstructed sample chamber. The new Niskin X utilizes stainless steel external spring closures. The Niskin X Water Sampler can be activated by the GO Devil Messenger (1000-MG) when individually or serially ...

Scentroid - Model SF450 - Flux Chamber

by Scentroid, a Division of IDES Canada.     based in Markham, ONTARIO (CANADA)

The Scentroid Flux chamber (AKA Emission Isolation Flux Hood) is used to determine levels of emissions from solid or liquid surfaces. The SF450 has a 100% solid stainless steel construction to ensure zero cross contamination. Flotation is achieved using 4 stainless steel floats eliminating the need for rubber tubes or foam making the unit easy to ...

Scentroid - Model SB 10 - Vacuum Chambers

by Scentroid, a Division of IDES Canada.     based in Markham, ONTARIO (CANADA)

The Scentroid Vacuum Chambers are easy to use, portable, and cost-effective air sample collection devices. The chamber comes in multiple sizes to fit bags of up to 10L, 25L, and even 50L. A built in rechargeable vacuum pump, creates a vacuum inside the chamber. The vacuum around the air sample bag forces the air sample to enter the collection bag ...

VACSCENT - Vacuum Chamber

by St. Croix Sensory, Inc.     based in Stillwater, MINNESOTA (USA)

VAC'SCENT Vacuum Chamber is a portable easy to use air sampler with integral pump that creates a negative pressure inside the chamber. Place your air sample bag(s) inside the chamber and fill without the need for a separate pump. You will want this convenient case in the field for easy sample collection. Carry your sample tubing and other tools in ...

Model CEE - Truck Samplers

by Pfeuffer GmbH     based in Kitzingen, GERMANY

The Rakoraf CEE Core Sampler is the fastest and easiest method to take an accurate sample from an open trailer. The sample is taken while the trailer is still on the weighbridge. The telescopic arm with the core tube can be extended or retracted, be turned horizontally 0 to 350 degrees, and can also be raised or lowered vertically.When the core ...

Specac - Environmental Chamber for Selector Diffuse Reflectance Accessory

by Specac Limited     based in Orpington, UNITED KINGDOM

Specac offers an Environmental Chamber designed for use with the Selector™ Diffuse Reflectance Accessory. This Environmental Chamber extends the sampling capabilities of the Selector™ by allowing the study of a diffusely reflecting sample at temperatures up to 800°C and pressures from vacuum (0.001 Torr) to 500 psi. Solid or powder ...

Digital Cavitation Chamber Instrument

by PMS Instrument Company     based in Albany, OREGON (USA)

This instrument is used to simulate cavitation of xylem vessels in plants under stress. A plant stem, limb or root is introduced into the Cavitation Chamber and a head of water is connected to the sample to measure water conductivity. The chamber is then pressurized to “seed” air into the xylem. It can be used to establish ...

Tekran - Model 1110 - Synchronized - Two Port Sampling System

by Tekran Instruments Corporation     based in Knoxville, TENNESSEE (USA)

The Tekran Model 1110 Synchronized Two Port Sampling System gives the Model 2537 Mercury Vapor Analyzer the ability to sample two unique sources. Switching between the two sources is synchronized with the instrument sampling cycle and is fully programmable by the user. This is particularly useful for flux chamber studies to measure inlet and ...

Model TC500 - Tucker Cell

by Strathkelvin Instruments Ltd.     based in Motherwell, UNITED KINGDOM

The oxygen content of blood can be measured accurately and quickly by the method of Tucker (1967). A small sample of blood is introduced into the chamber containing a solution of ferricyanide. The resulting release of bound oxygen produces an increase in PO2 which is detected by the oxygen electrode. The oxygen content can be calculated from the ...

Model MC100 - Microcell

by Strathkelvin Instruments Ltd.     based in Motherwell, UNITED KINGDOM

For PO2 measurement of blood or other fluids, or for microflowcell use. The all-glass sample chamber has a capacity of approximately 70µl. Samples are injected into the chamber via a 1 mm stainless steel tube fitted with a fine p.v.c needle-locating collar.

Model LZC-4V - Lamp photoreactor

by Luzchem Research Inc.     based in Ottawa, ONTARIO (CANADA)

Versatile and cost effective. Six top and 8 side lamps, provided with 2 complete sets of lamps. 14 UVA (350 nm) and 14 UVC (254 nm) lamps, (28 lamps total) safe exhaust system, safety goggles, installed drive motor, carousel for liquid samples (“merry-go-round”), turntable for solid samples, recessed magnetic stirrer and UVA/VIS power ...

Nordic - Cooling Chamber System

by Nordic Scientific & Natural Solutions AB     based in Lund, SWEDEN

Construction: This unit has double walled chamber, with PUF insulation. Interior is made of stainless steel & Exterior is either made of powder coated steel or stainless steel. The unit is provided with perforated stainless steel trays for sample mounting. This unit has full-length inner glass door and outside metal door with magnetic gasket and ...

Need help finding the right suppliers?

Let the XPRTs do the work for you