sampling system Equipment available in St. Helena

Available in St. Helena | Near St. Helena
410 Results found

We couldn't find any sampling system equipment in St. Helena

Here is a list of results available in St. Helena

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Monitoring & Testing ×

  • Subcategory: Environmental Sampling ×

  • Keyword: sampling system ×

  • Available in: Africa ×

  • Available in: St. Helena ×

Protea - Model SSCM - Self-contained Sampling System Control Module

by Protea Limited     based in Middlewich, UNITED KINGDOM

Self-contained sampling control for use with Protea core gas analysers. The control of the gas sample in any analysis system is critical. From heated sample lines and probes to pump control, the management of the system is important to stop any damage to analytical hardware. For this reason, Protea supplies the Sampling System Control Module ...

Gasmet - Multipoint Sampling System (MSS)

by Gasmet Technologies Oy     based in Helsinki, FINLAND

The MSS is designed for continuous monitoring of multiple measuring points. It’s designed to work as an integral part of the FCX measuring system. The MSS is used for on-line measurements. It is an ideal tool to measure components of interest in ambient conditions from several measuring points. The sample pump, valves, filter and sample ...

HI-Q - Stack Sampling System Design

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

HI-Q is ready to help with your stack sampling requirements: State and Federal nuclear regulatory agencies require a stack discharge sampling program as part of the licensing process. Radionuclides discharged to the air in the form of particulate and volatile compounds must be assayed. Therefore, nuclear facilities are required to follow standard ...

HORIBA - Model GPS5 - Gas Sampling System

by HORIBA Europe GmbH     based in Leichlingen, GERMANY

HORIBA gas samplers are suitable for volume-correct taking of gaseous samples during emission and emission measurements. This device can be used wherever gases and gaseous components must be inspected.

Erdwich - Substitute Fuel Sampling System

by Erdwich Zerkleinerungssysteme GmbH     based in Kaufering, GERMANY

System solutions for the pollutant and calorific value analysis of substitute fuels. Analytical shredding systems for QA work are a fundamental preliminary component in the production of substitute fuels. Businesses that buy in their substitute fuel from external suppliers are faced with two key analytical requirements before putting it to use: ...

Gasmet Technologies - Multipoint Sampling System – Heated (MSSH)

by Gasmet Technologies Oy     based in Helsinki, FINLAND

The MSSH is designed for continuous monitoring of multiple measuring points. It is designed to work as an integral part of the CEMS or FCX measuring systems. MSSH unit can be used as sampling system with pump for FCX system or as sample point switching box without pump with CEMS. The MSSH is used for on-line measurements. It is an ideal tool to ...

HI-Q - Model PM-10 Series - High Volume Air Sampling Systems

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

The EPA Clean Air Act of 1987 established a measuring standard to evaluate and monitor the health effects of thoracic inhaleable particles. The standard was set that in order for an environment to be healthy, in terms of these particles, it must have a concentration of less than 150 mg/m3 of particles with aerodynamic diameters less than 10 ...

Analytik Jena - Model TOPwave - Sample Preparation System

by Analytik Jena AG     based in Jena, GERMANY

TOPwave – Sample preparation at the highest level. TOPwave is a versatile system offering a variety of digestion vessels, fulfilling all requirements of modern applications. Its innovative design combines highest operating comfort with maximum safety and performance. The different vessel types are made of a high performance fluoropolymer, ...

PurCon - Sample Preparation System

by WTW - a xylem brand     based in Weilheim, GERMANY

The perfect online sample preparation - continuous, safe, low-maintenance. Yields samples free of suspended solids and bacteria.

HI-Q - Solar Power Air Sampling System Design

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

Since 1973 HI-Q Environmental Products Company's engineering staff has designed and developed hundreds of 'Custom, Turn-Key' Air Sampling Systems. Among these custom units are Complete Solar Powered Air Sampling Systems, which require Low Amp Draw, DC driven vacuum pumps. Let HI-Q's experience work for you.

REDWAVE - Model SAS - Sample Analysing System

by REDWAVE a division of BT-Wolfgang Binder     based in Gleisdorf, AUSTRIA

Sample Analysing System for Glass / Plastics / Paper / Wood / Metal / E-Scrap / Minerals. Input sample analysing (REDWAVE SAS) For analysis of the infeed material. Samples are taken from the input material received from different suppliers for being analysed before processing. For analysing the samples run through a REDWAVE SAS (Sample Analysing ...

HI-Q - Model VS23-Series - Continuous Duty, Constant Flow Air Sampling Systems

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

The VS-Series Air Sampling Systems can be either incorporated as the primary vacuum source in air monitoring instrumentation or used in conjunction with filter holders and filter media for the collection of particulate and/or gaseous constituents. The systems are furnished complete with a shock mounted base motor/pump, carrying handle, heavy duty ...

Mini Rosette - Model M1018 Series - Water Sampling Systems

by General Oceanics Inc.     based in Miami, FLORIDA (USA)

This small light weight, compact Rosette Water Sampling System, which is shown with Idronaut Ocean Seven Probe, can be used on a conducting cable, or can be pre programmed to trip based on time, temperature, pressure or other sensor, without the need for conducting cable. Its small compact size allows operation from a small boat without special ...

Rosina - Model 6 Pos. for 1.7 Liter - Rosette Water Sampling System

by General Oceanics Inc.     based in Miami, FLORIDA (USA)

Rosina Rosette Water Sampling System For 6 Position, 1.7l Sampler Size Rosette Includes: Submersible Array, Hanger,, Mount Stand, 2 Adaptor Plates, Interconnecting Cable, And An Instruction Manual 25'dia 29' H, Weight 39 lbs (18kg) Bottles purchased separately.

Intelligent Rosette - Model 1018 Series - Water Sampling System

by General Oceanics Inc.     based in Miami, FLORIDA (USA)

The G.O. Intelligent Rosette system has a new and innovative bottle tripping mechanism. The trigger mechanism has been improved and simplified to allow continuous operation without the previously required alignment and adjustment. This coupled with the redesign lanyard loading and tripping mechanism allows for simple and positive activation.

Rosette - Model M1018S Series - Syringe for Water Sampling System

by General Oceanics Inc.     based in Miami, FLORIDA (USA)

The Model 1018 Series Syringe Sampler Rosette, is a water sampling system which utilizes 10cc or 60cc, glass or disposable syringes to collect a discrete water sample at any depth. The system is available to accept 12 or 24 syringes. A tubing cluster may be installed on the syringes in order to precisely position where the sample is to be taken. ...

HI-Q - 7-Day Electronic Timer - High Volume Air Sampling System Options

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

7-Day Electronic Timer; 24 hours x 7 days programming. 16 program steps and cycle operation. Two independent 15 A control circuits. Manual override switch for each output. Easy-to-read, large, 0.5 inch high LCD display. Wide operating voltage range. 10-year battery backup for memory protection. Panel and Surface mountable. Protective cover and ...

HI-Q - Model LFRR-25 - Low Flow Oilless Rocking Piston Air Sampling System

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

This Low Flow Air Sampling System has a flow range of 2-25 LPM. It consists of a 13 pound, 1/8 hp, Oilless Rocking Piston Pump, TMV needle control valve (for flow rate adjustment/measurement), brass interconnect piping, and 1/4' hose barb (Quick Disconnect Optional).

Sample Pro - Portable Low Flow Sampling Pump

by Geotech     based in Leamington Spa, UNITED KINGDOM

The Sample Pro pump is the first pump system developed specifically to bring the advantages of low-flow sampling to portable pumps. With pump diameters of 44mm and upwards, narrow and difficult to access wells are no longer a problem.

LAR - Model FlowSampler - Maintenance-Free Sampling System

by LAR Process Analysers AG     based in Berlin, GERMANY

The FlowSampler is a patented sampling device from LAR which does not require filtration because sample is siphoned-off fromsample stream towards the main flow direction of the water. Therefore, no large particles can get into the sample stream. The smaller particles are collected because the unaltered sample then enters the system. The ...

Need help finding the right suppliers?

Let the XPRTs do the work for you